• 한국재료학회지
• /
• 제9권1호
• /
• pp.8-13
• /
• 1999

$ZrB _2$ was prepared from a mixture of $ZrO_2$, $B_2$$O_3$and Mg by SHS method. The combustion products were successfully obtained from a mixture of $Zro_2$:$B_2$$O_3$:Mg=1:2.0:8.5(molar ratio). MgO, by-product, was removed to 92.7% by leaching with 1M HCl solution at 9$0^{\circ}C$, for 10 hours. After leaching, the mean particle size of the resultant $ZrB_2$powders was 23.6$\mu\textrm{m}$. $ZrB_2$-ZrC composite was suitably obtained from a mixture of C/Zr=1.2 molar ratio by arc-melting method. The density of arc-melted specimen increased by adding excess zirconium content(x). The bulk density was 6.17g/㎤ for x=0, and 6.37g/㎤ x=4. Vickers hardness of arc-melted specimen was /$1290kg\textrm{mm}^2$ for x=0, and fracture toughness increased to 4.2MPa.m\ulcornerforx=4 compared to 3.4MPa.m\ulcornerfor x=0.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권1호
• /
• pp.171-178
• /
• 1999

Despite of decrease in shear and moment strengths, most steel structural designers use web openings in beams because of economical benefit and requirement. The purpose of this study is to suggest the method of reinforcement of H-shape steel beams with a rectangular web opening. If shear predominates over bending, it is necessary to consider all possible combinations of shear force and bending moment acting at the opening. In this paper, the ultimate strength and behavior of perforated beams have been investigated according to parameters (ratio of M/V, opening width within opening height ratio D/h, various reinforcing types A/B/C/D/M/N/W). The results of this study are as follows ; 1. Deformation of H-shape steel beams with a rectangular web opening was greatly affected by not only bending but also shear. 2. SB1-2/3 series have little difference in the reinforced efficiency, but SB1-2E/3E series have difference in the reinforced efficiency according to the reinforcement type. 3. Efficiency of SB1-2E/3E series is determined by reinforcing types, which RB1-2E-B/M/C and RB1-3E-M/D/C specimens have good efficient. Reinforcing type of perforated beams chooses efficient method according to ratio of M/V and D/h.

• 한국전자파학회논문지
• /
• 제17권4호
• /
• pp.358-367
• /
• 2006

본 논문에서는 다이버시티 구조를 갖는 고정 무선 중계 시스템의 보호비 계산을 위한 수학적 표현과 계산방법을 제안한다. 공간 또는 주파수 다이버시티를 갖는 시스템의 보호비 계산과 물리적 의미를 분석하며, 특히 다이버시티 개선인자에 관련된 안테나 이득, 안테나 이격거리, 주파수, 캐리어 주파수간 이격, 거리의 변수에 따라 보호비를 고찰한다. 계산 결과의 한 예로 주파수 6.2 GHz, 거리 60 km, 64-QAM, 수직 이격거리 25 m인 공간 다이버시티 시스템의 동일 채널 보호비는 약 60 dB가 되며, 이는 적용하지 않는 경우보다 약 15 dB 적음을 알 수 있었다. 또한 동일한 조건에서 주파수 이격 0.5 GHz인 주파수 다이버시티 시스템의 동일 채널 보호비는 약 64 dB이며, 이는 적용하지 않은 경우에 비해 약 11 dB 적음을 알 수 있었다. 결과적으로 공간 다이버시티시스템이 주파수 다이버시티 시스템보다 간섭에 덜 민감하며, 이는 주어진 간섭에 대해 상대적으로 양호한 품질을 확보할 수 있음을 시사한다.

• 전기전자학회논문지
• /
• 제20권3호
• /
• pp.318-321
• /
• 2016

IoT 산업이 빠르게 성장하면서 전원 관리 집적회로의 중요성이 부각되고 있다. 본 논문에서는 리플 Subtractor, 피드 포워드 커패시터, OTA를 이용한 LDO 구조를 제안한다. 이를 통해 10MHz가 넘는 고주파 영역에서도 -40dB 이상 높은 전원 전압 제거비(PSRR)를 얻었다. 설계된 Low-Dropout(LDO) 레귤레이터는 $0.18{\mu}m$ CMOS 공정에서 설계되었으며 시뮬레이션 결과 PSRR은 부하 전류 40mA, 500kHz에서 -73.4dB다. 최대 구동 가능 전류는 40mA이다.

• 대한두개안면성형외과학회지
• /
• 제20권6호
• /
• pp.376-381
• /
• 2019

Background: This study was conducted to determine the relationship between third molar (M3) and mandibular fracture. Methods: Patients with unilateral mandibular angle or condyle fractures between 2008 and 2018 were evaluated retrospectively. Medical records were reviewed regarding the location of fractures, and panoramic radiographs were reviewed to discern the presence and position of ipsilateral mandibular third molars (M3). We measured the bony area of the mandibular angle (area A) and the bony area occupied by the M3 (area B) to calculate the true mandibular angle bony area ratio (area A-B/area A×100). Results: The study consisted of 129 patients, of which 60 (46.5%) had angle fractures and 69 (53.5%) had condyle fractures. The risk of angle fracture was higher in the presence of M3 (odds ratio [OR], 2.2; p< 0.05) and the risk of condyle fracture was lower in the presence of M3 (OR, 0.45; p< 0.05), than in the absence of M3. The risk of angle fracture was higher in the presence of an impacted M3 (OR, 0.3; p< 0.001) and the risk of condyle fracture was lower in the presence of an impacted M3 (OR, 3.32; p< 0.001), than in the presence of a fully erupted M3. True mandibular angle bony area ratio was significantly lower in the angle fractures than in the condyle fractures (p= 0.003). Conclusion: Angle fractures had significantly lower true mandibular angle bony area ratios than condyle fractures. True mandibular angle bony area ratio, a simple and inexpensive method, could be an option to predict the mandibular fracture patterns.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.125-130
• /
• 2005

This paper suggests an efficient method of protection ratio calculation and shows some calculated results applicable to frequency coordination in microwave relay system networks, and the net filter discrimination (NFD) associated with Tx spectrum mask and overall Rx filter characteristics has been examined to obtain the adjacent channel protection ratio. The protection ratio comprises several factors such as C/N of modulation scheme, noise-to-interference ratio, multiple interference allowance, fade margins of multi-path and rain attenuation, and NFD. According to computed results for 6.7 GHz, 64-QAM, and 60 km at BER $10^{-6}$, fade margin and co-channel protection ratio are 41.1 and 75.2 dB, respectively, In addition, NFD for channel bandwidth of 40 MHz reveals 28.9 dB at the first adjacent channel, which results in adjacent channel protection ratio of 46.3 dB. The proposed method provides some merits of an easy calculation, systematic extension, and applying the same concept to frequency coordination in millimeter wave relay system networks.

• Bulletin of the Korean Chemical Society
• /
• 제30권4호
• /
• pp.791-793
• /
• 2009

Escherichia coli RNase P is composed of a large RNA subunit (M1 RNA) and a small protein subunit (C5 protein). Since both subunits are assembled in a 1:1 ratio, expression of M1 RNA and C5 protein should be coordinately regulated for RNase P to be efficiently synthesized in the cell. However, it is not known yet how the coordination occurs. In this study, we investigated how overexpression of C5 protein affects expression of the rnpB gene encoding M1 RNA, using a lysogenic strain, which carries an rnpB-lacZ transcription fusion. Primer extension analysis of rnpB-lacZ fusion transcripts showed that the overexpression of C5 protein increased the amount of the fusion transcripts, suggesting that rnpB expression increases with the increase of intracellular level of C5 protein.

• 수산해양기술연구
• /
• 제43권2호
• /
• pp.87-100
• /
• 2007

This study was carried out to offer fundamental data for improving the fishing efficiency of the Danish seine. The net height and the shape in the water was measured to analyze the efficiency of the existing Danish seine. And then, an improved fishing gear was developed based on the results and was tested in the field. Measuring devices were attached on center of a ground rope and a head rope. The net height is the spread distance between the ground rope and the head rope, which was measured on the different ratio of buoyancy. The results are obtained as follows. The net height estimated from the design plan of horizontal hanging ratio 0.40 in the existing Danish seine A and B estimated both 4.94m. The net height of the existing Danish seine A and B was respectively 1.8m and 2.3m, which form 36.4% and 46.2% of the net height estimated from the design plan. Buoyancy was changed as 79.5% and 96.2% relative to the sinking force in the existing Danish seine. The net height of 79.5% was 3.95m which increased to 80% of the estimated net height. The other shows the same result with the first case. It is not necessarily that the high buoyancy/sinking force ratio make the high net height, 80% is adequate as the buoyancy/sinking force ratio. In case of the improved Danish seine, the mean net height was about 5.0m, means 58.3% of estimated net height 8.58m.

• 한국공간구조학회논문집
• /
• 제3권2호
• /
• pp.85-90
• /
• 2003

If we use a third order approximation for the displacement function of beam element in finite element methods, finite element solutions of beams yield nodal displacement values matching to beam theory results to have no connection with the number increasing of elements of beams. It is assumed that, as the member displacement value at beam nodes are correct, the calculation procedure of beam element stiffness matrix have no numerical errors. A the member forces are calculated by the equations of $\frac{-M}{EI}=\frac{{d^2}{\omega}}{dx^2}\;and\;\frac{dM}{dx}=V$, the member forces at nodes of beams have errors in a moment and a shear magnitudes in the case of smaller number of element. The nodal displacement value of plate subject to the lateral load converge to the exact values according to the increase of the number of the element. So it is assumed that the procedures of plate element stiffness matrix calculations has a error in the fundamental assumptions. The beam methods for the high accuracy ratio solution Is also applied to the plate analysis. The method of reducing a error ratio of member forces and element stiffness matrix in the finite element methods is studied. Results of study were as follows. 1. The matrixes of EI[B] and [K] in the equations of M(x)=EI[B]{q} and M(x) = [K]{q}+{Q} of beams are same. 2. The equations of $\frac{-M}{EI}=\frac{{d^2}{\omega}}{dx^2}\;and\;\frac{dM}{dx}=V$ for the member forces have a error ratio in a finite element method of uniformly loaded structures, so equilibrium node loads {Q} must be substituted in the equation of member forces as the numerical examples of this paper revealed.

• 동력기계공학회지
• /
• 제15권1호
• /
• pp.39-44
• /
• 2011

This study was to investigate the effects of stress ratio and anisotropy on Fatigue Crack Propagation(FCP) behavior of rolled magnesium alloy AZ31B. The experimental materials were a Mg-Al-Zn magnesium alloy. The FCP test was conducted on compact tension specimen by a servo-hydraulic fatigue testing machine in air at room temperature. Compact tension specimens were prepared from the extruded parallel and vertical rolling direction. The test condition was frequency of 10Hz and sinusoidal load stress ratios are 0.1 and 0.7. The FCP rates was automatically measured by a compliance method. In the case of the FCP of AZ31B, the FCP of both direction of LT and TL by anisotropy of specimens are almost same value. In lower stress ratio, the FCP of the LT, TL specimens are increased in lower ${\Delta}K$ region but higher ${\Delta}K$ regions are almost same value. Finally, the result of observed the surface crack, it expressed the quasi-cleavage fracture in lower ${\Delta}K$ region and straight mark on the aspect of the facet in high ${\Delta}K$ region.