• 한국육종학회지
• /
• 제41권3호
• /
• pp.328-332
• /
• 2009

"오름"은 맥주보리 고품질 내재해성 신품종을 개발하기 위하여 1997년에 작물과학원 에서 보리 호위축병 저항성인 'Kinuyudaka'를 모본으로 하고 단간이며 내도복성인 '삼도보리'를 부본으로 인공교배하여 육성한 품종으로, 2006년 12월에 농촌진흥청 농작물 직무육성 신품종 선정 위원회에서 "오름"이라 명명하여 국가품종목록에 신품종으로 등록하였으며 그 특성은 다음과 같았다. "오름"은 2조형 맥주보리로서 출수기와 성숙기가 빠른 중생종이고 간장은 75 cm이고 내도복성이 강하여 기계화 수확에 적당하다. "오름"의 호위축병 저항성은 진주, 나주, 밀양에서는 저항성이며 익산에서는 중도 저항성을 나타내었다. "오름"의 수량성은 제주에서는 ha당 5.43톤으로 진양보리 대비 80% 증수하였고 밀양, 진주, 나주의 3개 지역 답리작 평균에서는 ha당 4.70으로 진양보리 대비 22% 증수한 다수성이었다. "오름"의 품질은 단백질 함량이 낮고 발아세와 맥즙 추출률이 높고 여과시간이 짧았으나 콜박지수와 효소 역가는 '진양보리'와 비슷하였다.

• 한국식품저장유통학회지
• /
• 제19권6호
• /
• pp.799-806
• /
• 2012

본 연구는 국내 무화과의 저장 중 품질 개선효과를 관찰하기 위하여 고농도 $CO_2$ 처리와 미세천공포장 필름을 적용하였다. 포장된 내부의 고농도 $CO_2$ 처리를 위하여 70%의 초기 $CO_2$로 유지하였으며, 가스투과도가 다른 포장재들(일반 OPP필름과 미세천공 MP필름)로 밀봉하여 5와 $25^{\circ}C$의 저장조건에서 수확 후 무화과의 선도유지를 평가하였다. 70% 이상의 고농도 $CO_2$로 전처리한 무화과의 중량 감소율과 경도, 부패과 발생율이 무처리구와 비교하여 선도유지에 긍정적인 효과가 있음을 관찰한 결과를 기반으로 70% 고농도 $CO_2$처리와 포장재로 밀봉한 무화과의 저장실험에서 일반 OPP필름, 일반 OPP필름+70% $CO_2$, 미세천공 MP필름+70% $CO_2$ 처리구가 중량감소율, 경도, 부패율 감소에 효과가 있음을 확인하였다. 그중 미세천공 필름에 70%의 고농도 $CO_2$로 충진하여 밀봉 포장한 무화과가 저장기간동안 호흡률 및 포장재의 가스투과도로 인한 포장내부에 변화된 환경을 최적조건으로 유지시켜 주는 것으로 관찰되었다. 따라서 고농도 $CO_2$처리된 미세천공 필름을 적용한 포장설계는 수확 후 무화과의 선도유지 개선에 큰 효과를 가져다줄 뿐만 아니라 유통과정 중 쉽게 발생할 수 있는 물리적 충격에 인한 외형적 손상으로부터 무화과의 상품성을 유지할 수 있는 효과 또한 기대할 수 있다.

• 한국산림과학회지
• /
• 제111권4호
• /
• pp.473-481
• /
• 2022

우리나라의 친환경벌채는 생태계, 경관 및 산림재해 방지 기능을 유지하도록 실행되고 있으며, 벌채 시 임목 중 일부를 남겨 임지가 일시에 드러나는 것을 방지하고 있다. 경기도 포천시 신북면 심곡리에 위치하고 있는 연구대상지에서 벌기령에 이른 41~50년생 일본잎갈나무림이 2017~2019년에 걸쳐 2 년간 벌채되었다. 벌채 3 년 후 산림 내 유기물 분포 및 변화를 측정하여 벌채에 따른 산림 내 유기물의 동태를 규명하는 것을 목적으로 하였다. 2020년 6월부터 2021년 1월까지 지상부 바이오매스, 낙엽층, 낙엽생산량 및 토양(0-30m 깊이)의 유기물 함량을 측정하였다. 친환경벌채가 이루어진 일본잎갈나무림의 지상부 바이오매스는 142.22 t ha^-1에서 44.20 t ha^-1로 감소하였다. 낙엽층의 유기물 함량은 미벌채구에서 32.87 t ha^-1였으며, 친환경벌채구에서 23.34 t ha^-1로 감소하였다. 연간 낙엽생산량은 미벌채구에서 4.43t ha^-1yr^-1였으며, 친환경벌채구에서 1.16t ha^-1 yr^-1로 감소하였다. 토양용적밀도는 미벌채구 토양 B층이 0.97 g cm^-3였으며 친환경벌채 후 1.06 g cm^-3로 증가하였다. 토양유기물 함량은 미벌채구 토양 A층에서 11.5%였으며 벌채 후 12.8%로 증가하였다. 토양유기물 총량은 대조구와 친환경벌채구에서 각각 245.21 t ha^-1과 263.92 t ha^-1로 유의성 있는 변화를 보이지 않았으나, 전체적으로 벌채 후 증가하는 경향을 보였다. 일본잎갈나무림 내 유기물 총량은 406.48 t ha^-1였으며 친환경벌채로 인하여 338.21 t ha^-1로 감소하였다. 벌채 후 산림 내 지상부 유기물 비율은 13.1%로 감소하였으며, 토양유기물은 78.0%로 증가하여 산림 내 유기물 분포가 변화한 것으로 나타났다. 본 연구의 결과 친환경벌채는 지상부에 축적된 탄소가 크게 소실된 반면 토양내에 저장된 탄소량의 증가로 전체적으로 산림 내 탄소 저징량의 감소 규모가 완화된 것을 보여주고 있다. 이 결과는 기후변화에 대응할 수 있는 산림 관리 방안의 마련을 위한 기초가 될 것으로 생각된다. 본 연구는 친환경벌채 후 3 년이 지난 시점에서 얻은 결과를 보여 주었으며, 이후의 산림 변화를 파악하기 위하여 산림 유기물의 변화와 수목 생장에 대한 추가연구가 필요한 것으로 보인다.

• 한국초지조사료학회지
• /
• 제27권2호
• /
• pp.93-100
• /
• 2007

본 연구는 섬유질배합사료의 조단백질 수준이 임신초기 흑염소의 사료섭취량, 영양소 소화율 및 질소 축적율에 미치는 영향을 조사하여 임신흑염소의 적정 조단백질 수준을 구명하기 위하여 실시하였다. 공시축은 임신초기흑염소 12두를 4처리구(관행사료구, 조단백질 10, 12 및 15%)로 나누어 처리구당 3두씩 대사케이지에 완전임의 배치법으로 배치하여 시험을 실시하였으며 그 결과는 다음과 같다. 섬유질배합사료의 일반 조성분은 건물 함량이 $89.0{\sim}91.0%$를 나타내었고, ADF와 NDF 함량은 $18.87{\sim}19.85$ 및 $53.41{\sim}54.80%$로 나타나 조단백질 수준에 따른 섬유소 함량의 차이는 없었다. 조단백질 함량은 TMR10, TMR12 및 TMR14구가 각각 10.61, 12.15 및 14.97% 이었다. 하지만, NFC 함량은 섬유질배합사료내 단백질수준이 증가함에 따라 감소하였다. 건물섭취량, 영양소 섭취량 및 가소화 영양소 섭취량은 TMR15와 대조구가 TMR10과 TMR12구 보다 유의하게 높았으며(p<0.05), 대사체중당 건물섭취량과 체중에 대한 건물섭취비율에서도 대조구와 TMR15구가 유의하게 높았다(p<0.05). 건물소화율은 $69.01{\sim}70.33%$ 범위로 나타났다. 에테르 추출물 소화율은 세 수준의 단백질을 함유하는 섬유질배합사료군이 대조군 보다 유의하게 높았으나(p<0.05), 섬유질배합사료군간에는 유의한 차이가 나타나지 않았다. 질소축적량 및 축적율에서는 TMR15구와 대조구가 다른 처리구 보다 유의하게 높게 나타났다(p<0.05). 이상의 결과에서 임신초기 흑염소사료 내 증가하는 수준의 조단백질 함량은 건물섭취량 및 질소 축적을 증가시켰고, 특히 TMR 사양에서 임신초기 흑염소의 조단백질수준은 적어도 15% 이상은 되어야 할 것으로 추정된다.조생 다수성 IRG, 6월 상순으로 벼 이앙시기가 늦을 경우에는 5월 하순 수확이 가능하면서 생산성과 사료가치가 높은 밀이 권장되었다.함량으로 낮아졌다. 비보존성 반응(즉 침전, 흡착, 산화, 용해 등)과 보존성 반응(예: 수리학적 혼합)은 미량원소가 강으로 이동되는 것을 크게 감소시키는 효과적인 자연저감 기작이었다.가되는 추세를 보이고 있었으나 정상군에 비해 면역반응 신경세포의 총수는 43.9%(1형: $23.7%\downarrow$, 2형: $17.8%\downarrow$, 3형 : $56.2%\downarrow$) 감소한 상태로 남아있었다. 이상의 결과로 capsaicin 투여에 의해 성숙흰쥐의 근육층 신경얼기에서 칼슘채널 ${\alpha}_{1B}$ subunit의 면역활성도는 투여 후 1주일가지 빠르게 저하되며 그 이후부터는 점차 정상으로 회복되나 완전한 상태로의 회복에는 4주 이상의 시간경과가 필요함을 알 수 있었다.形態學的) 배양학적(培養學的) 특성(特性)을 조사(調査)한 결과(結果) Candida guilliermondii var. guilliermondii 로 동정(同定)되었다. 6. CHS-13 균주(菌株)를 당화액(糖化液)에 배양(培養)시켰을 때 Lowry-protein 함량은 $0.72\;mg/m{\ell}$ 이었으며 , yeast extract 첨가(添加)하여 배양시(培養時)는 yeast extract 농도(濃度)가 증가(增加)함에 따라 단백질(蛋白質) 함량(含量)도 증가(增加)하였다. 7. CHS-13 균주(菌株)의 RNA 함량(含量)은 $4.92{\times}10^{-2 }\;mg/m{\ell}$이었으며 yeast extract 농도(濃度)가 증가(增加)함에 따라 증가(增加)하다가 농도(濃度) 0.2%에서 최대함량(最大含量)을 나타내고 그후는 감소(減少)

• 한국식품영양과학회지
• /
• 제35권1호
• /
• pp.68-77
• /
• 2006

본 연구의 조사대상자는 전남 신안군 완도면 지역의 46세에서 83세사이의 남자 88명과 여자 99명 총 187명을 대상으로 한 연구결과를 요약하면 다음과 같다. 조사대상자의 남녀 평균 연령은 각각 65.14세, 64.92세 였고 평균 신장은 161.16cm, 151.64 crn, 평균 체중은 63.03 kg, 56.46 kg, 평균 BMI는 $24.33 kg/m^2,\;24.48 kg/m^2$, 평균 WHR은 0.94, 0.94였다. 조사 대상자 남녀 평균 총 섭취에너지는 1869.06 kcal, 1943.95 kcal로 남녀 모두 연령 증가에 따른 차이는 없었지만 남자는 60대까지는 증가하였고 70대 이후에 감소하였다. 여자는 60대가 가장 적게 섭취하는 것으로 조사되었다. 탄수화물 섭취량의 평균은 남녀 각각 368.26 g, 391.36 g로 유의적 차이는 없었으나 여자가 남자보다 많이 섭취하였고 연령증가에 따른 차이는 보이지는 않았다. 단백질 섭취량의 평균은 남녀 각각 28.08 g, 30.45 g으로 성별에 따른 차이는 없었고 연령이 증가함에 따라서 남녀 모두 증가하는 경향을 보였고 권장량에 비해 적게 섭취하는 것으로 조사되어 계절적인 요인도 관련이 있는 것으로 보이나 앞으로 이 지역에 대한 세밀한 연구가 필요할 것으로 생각된다. 지방 섭취량은 각각 31.57g, 28.51 g으로 성별과 연령에 따른 차이가 없는 것으로 조사되었다. Vit. A, Vit. $B_1$, Vit. $B_2$, Vit. D는 성별과 연령 증가와는 관련이 없는 것으로 조사되었다. Vit. C는 성별에 따른 차이는 없었고 연령이 증가함에 따라 남자는 유의적으로 감소하였고 여자는 유의성은 없지만 증가하는 경향을 보였다. Vit. E는 여자가 유의적으로 많이 섭취하였다. 엽산, 인, 철분 섭취는 남자가 유의적으로 많이 섭취하였으며 남자는 연령 증가에 따라 감소하는 경향을 보였으며 남녀 모두 한국인의 영양권장량을 상회하였다. 식사 중 콜레스테롤은 성별과 연령 증가에 따른 차이는 없었다. 조사대상자의 혈청 중성지방 농도의 남녀 각각 평균은 $149.53{\pm}8.22 mg/dL$, $143.83{\pm}5.07mg/dL$로 남녀간에 유의적인 차이는 없었으며, 남자의 경우 59세 이하, 60대, 70대 이상군에서 각각 129.6 mg/dL, 159.7 mg/dL, 157.4 mg/dL, 여자의 경우 각각 133.4 mg/dL, 149.4 mg/dL, 150.0 mg/dL로 59세 이하에서만 여자가 높고 다른 연령 군에서는 남자가 높았으며 연령증가와 함께 유의성은 없으나 증가하는 경향을 보였다. 혈청 총 콜레스테롤농도의 평균은 $189.53{\pm}4.73 mg/dL$, $157.93{\pm}4.96 mg/dL$이었고 남자가 유의적으로 높았다(p<0.05). 남녀 각각 59세 이하, 60대, 70대 이상군에서 185.0 mg/dL, 199.3 mg/dL, 180.9 mg/dL과 161.4 mg/dL, 180.9 mg/dL, 164.8 mg/dL였다. $40\~50$대는 남자가 유의적으로 높았으며 (p<0.05) 유의성은 없지만 남녀 모두 식사중의 콜레스테롤 섭취량이 가장 많은 것으로 조사된 60대의 혈청 총 콜레스테롤 농도가 가장 높은 것으로 나타나 식사중의 콜레스테롤이 혈청 총콜레스테롤에 영향을 미치는 것을 알 수 있었다. 혈청 LDL-콜레스테롤 농도의 평균은 $120.63{\pm}2.70 mg/dL$, $112.23{\pm}3.03 mg/dL$로 남녀 모두정상범위에 속하였으며 남자가 여자에 비해 유의적으로 높았고(p<0.05)남녀 각각 59세 이하, 60대, 70대 이상군에서 118.4 mg/dL, 118.8 mg/dL, 125.5 mg/dL과 108.6 mg/dL, 112.5 mg/dL, 112.9 mg/dL로 연령증가와 함께 증가하는 경향을 보였다. 혈청 HDL-콜레스테롤 농도의 평균은 $52.98{\pm}1.42 mg/dL$, $50.36{\pm}1.51 mg/dL$로 성별, 연령간에 유의적인 차이는 없었다. 심혈관 질환 예측 인자인 atherogenic index는 남녀 각각 평균 $2.13{\pm}0.08$, $2.49{\pm}0.11$로 여자가 유의적으로 높았고(p<0.05) 또한 여자는 유의성은 없지만 연령 증가와 함께 증가하는 경향을 보였고 $70\~80$대는 여자가 유의 적으로 높게 나타나(p<0.05) 여자는 연령증가와 함께 호르몬의 영향으로 심혈관계질환 위험성이 높은 것을 확인할 수 있었다. 공복시 혈당농도는 평균 $86.51{\pm}3.25 mg/dL$, $91.16{\pm}2.89 mg/dL$로 모두 정상 범위에 있었으며 $70\~80$대는 여자가 유의적으로 높게 나타났다(p<0.05). 본 연구에서는 2000년 International Obesity Task Force(IOTF)가 아시아인을 대상으로 제시한 기준에 따라 3단계(저체중 BMI<19, 정상체중 $19{\leq}BMI<25$, 과체중 $BMI\geq25$)로 분류한 결과 혈청 중성 지방은 남자 저체중군, 상체중군, 과체중군이 각각 114.1 mg/dL, 134.8 mg/dL, 176.5 mg/dL, 여자는 각각 106.7 mg/dL, 140.2 mg/dL, 157.1 mg/dL로 모든 연령 군에서 200 mg/dL보다는 낮았으나 과체중군이 다른 두 군에 비해 유의적으로 높은 것으로 조사되었다(p<0.05). 혈청 총콜레스테롤의 남녀 저체중군, 정상체중군, 과체중군이 각각 114.5mg/dL, 192.0 mg/dL, 203.4 mg/dL과 112.9 mg/dL, 156.7 mg/dL, 193.7 mg/dL로 BMI가 높을수록 두군 모두 유의적으로 증가하였다(p<0.05). LDL-Cholesterol은 남녀 저체중군, 정상체중군, 과체중군이 각각 104.6 mg/dL, 123.2 mg/dL, 120,8 mg/dL과 79.8 mg/dL, 105.9 mg/dL, 123.7 mg/dL로 BMI가 높을수록 유의적으로 높아졌다(p<0.05). 동맥경화지수는 남녀 각각 저체중군, 정상체중군과 과체중군이 2.48, 1.98, 2.23과 1.66, 2.22, 2.98로 저체중군에서는 남자가 높았으나 정상체중군과 과체중군에서는 여자가 높았고 BMI가 증가함에 따라 남자는 뚜렷한 경향을 보이지 않았으나 여자는 유의적으로 증가하여 (p<0.05) 동맥경화를 비롯한 심혈관계질환의 위험도가 여자가 높다는 것을 알 수 있었다. 혈당은 남자는 저체중군, 정상체중군과 과체중군이 각각 68.1 mg/dL, 96.0 mg/dL, 78.4 mg/dL로 정상체중일 때 다른 두 군에 비해 유의적으로 높았는데(p<0.05)여자는 87.5 mg/dL, 88.5 mg/dL, 94.8 mg/dL로 유의성은 없지만 BMI가 증가할수록 혈당이 높아졌다. 본 조사대상자의 연령을 보정한 후 WHR에 따른 혈청 지질 및 혈당 수준은 남자는 WHR이 높을수록 혈청 중성 지방과 혈당은 유의적으로 증가 하였고(p<0.05) 혈청 총 콜레스테롤, LDL-cholesterol, 동맥경화지수는 유의성은 없지만 증가하는 경향을 보였다. 여자는 WHR이 높을수록 혈중 중성지방, 혈당, 혈청 총 콜레스테롤, LDL-cholesterol, 동맥 경화지수가 유의적으로 높아졌다(p<0.05). HDL-Cholesterol은 WHR이 높을수록 남자는 유의성은 없지만 낮아지는 경향을 보였고 여자는 유의적으로 낮아졌다(p<0.05). 이상의 결과에서 연령, BMI, WHR이 높을수록 심혈관계 질환의 위험인자인 혈청 중성지방, 혈청 총콜레스테롤, LDL-cholesterol의 수준이 높아졌지만 혈청 지질의 평균이 대부분 한국인의 정상수준에 속하였고 비정상자의 비율도 다른 지역에 비해서 낮은 편으로 조사되어 앞으로 도서지역의 식생활과 만성질환 위험인자와의 관련성에 대한 지속적인 연구가 필요할 것으로 보인다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국작물학회지
• /
• 제8권1호
• /
• pp.129-177
• /
• 1970

수도작에 있어서 수량성의 향상과 경영의 합리화률 기하기 위한 집단재배의 기술체계를 확립하고자 지역과 지대별로 임의선정된 18개소에서 집단재배와 개별재배를 한 수도에 대하여 경종 및 생육ㆍ수량구성요소의 변이를 조사연구하였으며 460개소의 집단재배와 개별재배에 대하여 경종ㆍ경영 및 조직운영등을 비교조사하고 집단재배와 개별재배의 경제성을 분석하여 그 결과를 요약하면 아래와 같다. 1. 집단재배와 개별재배의 경종 및 생육ㆍ수량형질에 관하여 연구한 결과는 다음과 같다. (1) 육묘에 있어서 집단재배가 비료의 3요소 특히 인산과 가리의 사용량이 많았고 약제살포의 횟수도 많았다. (2) 본답에 있어서의 경종기술은 집단재배가 개별재배보다 ${\circled1}$ 이앙기가 빨랐고 ${\circled2}$ 재식밀도에 있어서 1주당 재식묘수는 적으나 단위면적당의 포기수는 많으며 \circled3 시비량은 질소, 인산, 가리 및 퇴비의 시용량이 현저히 많았고 ${\circled4}$ 분시횟수도 많았으며 ${\circled5}$ 살충제 및 살균제의 살포횟수도 역시 집단재배에서 많았다. (3) 도북의 정도는 집단재배가 약간 더 하였고 병해충의 발생정도는 잎도열병, 목도열병 그리구 멸구, 이화명충 1화기 및 2화기의 발생이 집단재배가 적었다. (4) 집단재배를 한 수도의 간장 및 수장은 길고 고중도 무거웠다. 그리고 조고비율은 집단재배에 있어서 80.9%, 개별재배가 69.9%로서 높은 유의차가 있었다. (5) 수량구성요소인 수수와 1수평균영화수가 집단재배에서 현저히 많았고 현미 1000립중도 무거웠으며 등숙율은 개별농가의 벼와 차이가 없었고 그 변이계수는 집단재배가 개별재배에 비하여 모두 작은 값을 보였다. (6) 현미수량은 평균 10a당 집단재배 459.0kg, 개별재배 374.8kg으로서 84.2kg이나 전자가 많았으며 그들간의 변이계수는 집단재배에서 작게 나타났다. (7) 기간재배기술과 수량구성요소의 상관관계에 있어서 고도의 유의상관을 보인 것은 파종기와 1수영화수, 못자리 약제살포횟수와 1수영화수, 이앙기와 1수영화수, 본답의 인산시용량과 수량, 본답의 가리시용량과 등숙율, 분시횟수와 수량등에서 정(+)상관을 보였고 파종기와 등숙율간에는 부(-)상관을 보였다. 2. 집단재배와 개별재배의 경종\ulcorner경영 및 조직운영에 대하여 종합적으로 조사비교한 결과는 다음과 같다. (1) 집단재배의 품종수는 13개이고 개별재배에서는 47품종으로서 개별재배가 품종의 단순화를 기하지 못하고 있다. (2) 육묘기술에 있어서 비료3요소 특히 인산과 가리의 시용량이 많았고 약제살포횟수가 많다는 것은 1ㆍ의 실험결과와 같으며 이밖에 집단재배의 경우에는 종자소특이 100% 실시되었으며 파종량도 3.3$m^2$당 표준파종량인 3.6～5.4이 파종이 많이 실시되었으나 개별재배에서는 박파와 밀파가 많아 파종량의 변이가 컸었다. (3) 이앙기, 재식밀도, 병충해방제, 약제살포횟수, 시비량 및 분시횟수등은 1.의 결과와 같으며 추경 및 객토와 동력경운기의 사용은 집단재배에서 많았으며 이앙방식은 종전의 정방형식에서 극단적인장방형식으로 많이 바뀌었으며 물관리에 있어서는 중각낙수와 간단관수가 비교적 많이 실시되었다. (4) 현미수량은 평균 10a당 집단재배가 466kg이고 개별재배는 380kg으로서 전자가 86kg 많았다. (5) 병충해방제작업이 집단재배에서 집단방제로 많이 실시되었고 종자소독도 80% 이상의 공동으로 이루어 졌으며 수확, 수확물의 운반, 탈곡, 논갈이 작업등도 개별재배에서 보다 많이 공동으로 이루어졌다. (6) 집단재배에서 객토 및 퇴비의 사용이 현저히 많았으며 그 작업도 공동으로 이루어진 비율이 높고 또한 노동력의 투입도 많았다. (7) 육묘 및 본답의 물관리작업은 집단재배가 개별재배보다 노동력의 투입이 적었다. (8) 비료, 농약 및 노동력등의 비용가액은 집단재배가 개별재배보다 많았으며 약 2배에 가까웠다. (9) 경영규모는 3ha로부터 7ha 이상의 범위에 있으며 5ha내외의 것이 많았고 1개소의 집단재배는 10～20개 정도의 필지로 되어있는 것이 대부분이었다. (10) 경영자 및 경작자의 학력은 집단재배의 회장, 재배반장, 방제반장 및 수리반장 모두 국민학교졸업 이상이 93.7%이며 개별재배는 83%를 보였고 그들의 연령은 40～45세가 가장 많으며 이러한 경향은 양자가 비슷하였다. (11) 집단재배의 운영에 관한 주요설문에 대한 경작자들의 반응은 집단재배를 함으로서 확실히 수량은 증가하였는데 이것은 시비법개선과 병충해방제의 효과가 가장 컸다고 생각하는 사람이 많았고 집단재배를 함으로서 영농자재의 입수와 모든 작업이 적기에 이루어 졌다고 하는 것이 많았다. 또한 경작노력은 적게 들었다는 것이 66.8%이며 이앙노력은 집단재배가 오히려 더 들었다는 것 그리고 관의 간섭이 많았다는 것 등이 특이한 것이며 집단재배의 계속을 원하는 농가가 74.5%이고 원치 않은 농가가 25.5%였었다. 3. 집단재배와 개별재배의 경제성을 분석한 결과는 다음과 같다. (1) 경영비의 비용가액중 퇴비, 금비, 농약대 및 고용노임은 집단재배에 있어서 개별재배보다 각각 335원, 199원, 388원 및 303원이 더 투입되어 큰 차이를 보였으나 기타생산비목들은 집단재배와 개별재배간에 큰 차이가 없었다. (2) 총수익에서 경영비를 뺀 소득은 집단재배에서 24,302원이였고 개별재배에서는 20,168원으로 집단재배에서 10a당 4,134원의 소득증대를 나타내었다. 본 연구에서 수도집단재배는 새로운 기술의 적용도를 높이고 경영의 합리화를 기하여 안전다수확으로 개개 농가의 소득증대에 기여하였을 뿐만아니라 농민에게 새 기술의 적용이 유익했다는 실증을 보여 줌으로서 농민 스스로의 생산과정에 파급적이며 영속적인 변화를 촉진시킬것이라는 또 하나의 결론을 얻었다.

• Journal of Animal Science and Technology
• /
• 제45권6호
• /
• pp.1007-1018
• /
• 2003

평균체중 120kg 내외의 생후 5개월령 한우 27두를 외과적 수술로 거세를 실시한 후 대조구(볏짚 급여구) 10두와 시험구(마늘대 사일리지 급여구) 17두로 나누어 사양시험을 22개월 동안 실시하였다. 농후사료는 대조구에서 육성기, 비육전기 및 비육후기 동안 각각 체중의 1.34, 1.69 및 1.65%를 급여하였고 시험구에서는 1.47, 1.74 및 1.66%를 급여하였다. 조사료원으로 볏짚을 대조구에서 육성기, 비육전기 및 비육후기 동안 각각 체중의 1.37, 0.65 및 0.43%를 급여하였고 시험구에서는 1.38, 0.63 및 0.43%를 급여하였다. 또한 시험구에서는 마늘대 사일리지를 비육전기 및 비육후기 동안 각각 체중의 0.22 및 0.33%를 급여하였다. 본시험의 결과를 요약하면 다음과 같다. 일당증체량은 전기간 동안 대조구와 시험구간에 각각 0.80 및 0.81kg으로 유의적인 차이가 없었다(P〉0.05). 농후사료 섭취량은 대조구와 시험구 각각 5.02kg 및 5.35kg으로 시험구가 약간 높았지만 유의적인 차이는 없었으며(P〉0.05), 조사료 섭취량은 대조구와 시험구 각각 2.58 및 3.58kg이었고, 사료효율은 대조구와 시험구가 각각 9.50 및 11.05로 차이는 없었다. 육량 등급은 마늘대 급여구가 약간 낮았지만 유의적인 차이는 없었고(P〉0.05), 육질 등급은 유의적인 차이는 없었지만 시험구가 약간 높았다. 쇠고기의 전단력은 마늘대 급여구가 볏짚 급여구보다 낮았다. 도체의 아미노산 조성은 필수 아미노산 및 비필수 아미노산 모두 처리구간에 차이가 나타나지 않았고, 도체의 지방산 조성 중 포화 지방산은 대조구가 약간 높았고, 불포화 지방산은 반대로 처리구가 약간 높았다. $\omega$-6과 $\omega$-3 지방산의 비율은 마늘대 급여구가 볏짚 급여구보다 좁아서 마늘대 급여가 불포화지방산중 oleic acid 함량이 볏짚 급여구에 비하여 더 높아서 근육 중의 지방산의 조성을 좋게 하는 것 같다. 두당 소득은 시험구가 대조구보다 22.54% 증가하였다. 이상의 결과들을 종합하여 볼 때 한우 거세우에 마늘대 사일리지를 비육기간 동안 급여하면 거세우의 증체에는 영향을 주지는 않지만, 한우 사육 농가에는 소득의 증대를 가져오므로 마늘대 사일리지를 조사료 공급원으로 급여하는 것이 바람직하다고 사료된다.

• 기술혁신학회지
• /
• 제10권1호
• /
• pp.73-97
• /
• 2007

R&D를 통한 미래기술개발은 정보 및 지식기반 경쟁력이라는 틀 안에서 기업의 생존과 연계된 기술적 혁신전략과 맞물려야 하며 개방형 네트워크 R&D 조직을 통하여 고객 중심의 미래기술전략이 이루어져야 한다. 따라서 미래기술개발은 단순히 미래예측을 통한 기술개발에만 그치는 것이 아니라 기술개발 단계 이전부터 고객의 니즈를 파악하여 미래기술 또는 서비스 개발에 실제로 고객 니즈를 반영한 기술의 시장화를 통하여 기업가치의 극대화를 높여야 한다. 일반적인 시장세분화는 일반적으로 인구 통계적 특성 또는 고객의 소비 패턴 등과 같은 과거 자료를 바탕으로 고객을 구분하는 사후세분화를 광범위하게 활용하여 왔으나 이러한 방식은 고객의 다양한 잠재 수요분석을 통한 새로운 시장기회를 탐색하는 데에 어려움이 있어 장기적 관점에서 미래 기술서비스에 대한 수요파악을 위해서는 고객의 심리의식, 라이프스타일 등을 복합적으로 고려한 고객 세분화 기법을 적용한 사전세분화가 실시되어야 한다. 본 연구는 미래통신서비스 수요에 가장 큰 영향을 미칠 것으로 예상되는 고객의 기술수용태도와 일상생활에서 추구하는 가치지향성을 세분화 변수로 선택하고 이를 통하여 미래 통신서비스 시장을 세분화하는 것을 목적으로 하였으며 기술 개발활동 단계부터 사전세분화를 통하여 기술개발전략 구축에 활용하고자 하였다. 우선 신기술에 대한 수용태도를 기준으로 2개의 군집을 도출하였으며 구분된 2개의 군집에 대하여 각각 고객의 가치지향성을 기준으로 2차 세분화 분석을 실시하는 계층적 고객세분화 모형을 제시하였다. 계층적 모형을 통하여 도출된 군집에 대한 상세 분석을 통해 군집별 세부적인 특성을 살펴보았으며 이에 따라 각각의 세분 군집이 독립된 개별 시장으로 반응하고 있음을 통계적으로 밝혀내었으며 대응일치분석을 통하여 특정 미래통신서비스에 대한 시장의 진입, 확산 그리고 전이가 용이할 수 있도록 목표 세분 군집을 위치화 하였다. 비율(ICM:TE ratio)은 대조군(1:6.0)이 group A(1:3.4)나 group B(1:3.4)보다 유의하게(p<0.05) 높았다. 생쥐 2-세포기 배를 배양하여 72시간까지의 배 발달율을 살펴보면 배양액에 에너지원을 첨가하는 것이 효과적이었으며, 자궁액 농도보다는 난관액 농도로 에너지원을 조절했을 때 배 발생 능력이 높은 경향을 보였다.. 시험 2는 1일령 육계($Ross^{(R)}$종) 240수(암 수 각각 120수)를 공시하여 6처리 4반복, 반복당 10수(암 수 동수) 씩을 케이지(가로: 35.5 cm, 세로: 45 cm, 높이: 55 cm)에 완전 임의배치하여 각각 35일간사양 시험을 실시하였다. 시험 1에서 생산지수는 대조구에 비해 첨가구들이 높은 경향이 있었고 herbs M구가 가장 높았다. 시험 2에서 $4{\sim}5$주 사료 섭취량은 대조구에 비해 첨가구들이 유의적으로 높았다(P<0.05) 사료 요구율은 항생제 처리구가 다른 처리구보다 낮았다. 시험 1의 RBC와 적혈구 용적 (HCT 또는 PCV), Hb는 첨가구들이 대조구보다 유의적으로 높았다(P<0.05). 시험 2의 BA는 대조구보다 첨가구들이 유의적으로 낮았다(P<0.05). 시험 1과 시험 2의 혈청 IgG 농도는 대조구에 비해 첨가구들이 유의적으로 높았다(P<0.05). 시험 1과 시험 2의 장내 미생물 균총과 영양소 이용율은 처리간에 통계적 차이가 없었다. 결론적으로 일부 한방제와 생약제제는 육계에서 항생제를 대체하여 사용이 가능하며 특히 혈액의 성분에 유의한 영향을 미치는 것으로 사료된다. 실증연구가 필요할 것으로 사료된다.trip과 Sof-Lex disc로 얻어진 표면은 레진전색제의 사용으로 표면조도의 개선이 이루어지지 않았다.^{11}C]raclopride$ PET을 이용하여 비흡연 정상인에서 흡연에 의한 도파민 유리를

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.