• Journal of Welding and Joining
• /
• 제7권2호
• /
• pp.35-48
• /
• 1989

This study is concerned with a correlation of microstructure and local brittle zone (LBZ) in offshore structural steel welds. The influence of the LBZ on fracture toughness was investigated by means of simulated heat-affected zone (HAZ) tests as well as welded joint tests. Micromechanical processes involved in void and cleavage microcrack formation were also identified using notched round tensile tests and subsequent SEM observations. The LBZ in the HAZ of a multiphase welded joint is the interstitially reheated coarse grained HAZ, which is influenced by metallurgical factors such as effective grain size, the major matrix structure and the amount of high-carbon martensite-austenite (M-A) constituents. The experimental results indicate that Chirpy energy was found to scale monotonically with the amount of M-A constituents, confirming that the M-A constituent is the major microstructural factor controlling the HAZ toughness. In addition, voids and microcracks are observed to initiate at M-A constituents by the shear cracking process. Thus, the M-A constituent played an important role in initiating the voids and microcracks, and consequently caused brittle fracture.

• Journal of applied mathematics & informatics
• /
• 제42권1호
• /
• pp.207-212
• /
• 2024

In this paper, we study Malcev algebra bundles and Malcev algebra bundles of finite type. Lie algebra bundles and Lie transformation algebra bundles are defined using given Malcev algebra bundle and we conclude some results for finite type.

• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.4-8
• /
• 2010

• Journal of Welding and Joining
• /
• 제19권1호
• /
• pp.75-81
• /
• 2001

The metallurgical study of microconstituents in transient liquid phase bonded joints of Ni-base single crystal superalloys, CMSX-2 and CMSX-4 was investigated employing MBF-80 insert metal. TLP bonding of specimens was carried out at 1,373~1,523K for 0~19.6ks in vacuum. Three types of microconstituents ; needle-like constituent, dot-like constituent and abnormal shape constituent were formed in the bonded interlayer during TLP bonding operation. All these microconstituents were identified as boride. Microconstituents contain a large percentage of Cr in the early stage of bonding. As increasing the holding time, the amount of Cr was decreased and the amount of W, Co and Re were increased. From the analysis results of electron diffraction pattern by TEM, composition of elements in microconstituents were into MBlongrightarrowM$_{5}$B$_3$longrightarrowM$_2$B type with the increased in holding time. It can be explained by the fact that the relative amount of boron in microconstituents was decreased when the holding time was increased.d.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권6호
• /
• pp.367-370
• /
• 2002

Candida cylindracea lipase was immobilized by adsorption on acid washed glass beads. It was observed that protein loading of the support depends on the size of the particle, with smaller particle containing higher amount of protein per unit weight. Initial reaction rate linearly varied up to enzyme concentration of 17.25 U/mL. Amount of free fatty acids produced was linearly proportional up to the enzyme loading of 1650 $\mu$g/g of bead. Achievement of chemical equilibrium took longer time in the case of less protein loading. Degree of hydrolysis was found to decrease in second and third consecutive batch operations on repeated use of immobilized lipase.

• 열처리공학회지
• /
• 제14권6호
• /
• pp.345-349
• /
• 2001

This study has investigated the effect of thermal stability and mechanical property of $Fe_{80-X}P_{10}C_6B_4M_X$(X=2, 4, 6, M=transition metal) amorphous alloys fabricated by the melt-spun process. The glass transition temperature($T_g$), crystallization temperature($T_x$) and hardness increase with decreasing electron concentration (e/a) from about 7.38 to 7.18. The decrease of e/a implies the increase in the attractive bonding state between the M elements and other constituent element. The decrease in a/e leads to the enhancement of the attractive bonding state among the constituent elements which is favorable for the increase in $T_g$, $T_x$ and hardness.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권8호
• /
• pp.3645-3651
• /
• 2012

Conventional pap smear (CPS) examination has been the mainstay for early detection of cervical cancer. However, its widespread use has not been possible due to the inherent limitations, like presence of obscuring blood and inflammation, reducing its sensitivity considerably. Automated methods in use in developed countries may not be affordable in the developing countries due to paucity of resources. On the other hand, manual liquid based cytology (MLBC) is a technique that is cost effective and improves detection of precursor lesions and specimen adequacy. Therefore the aim of the study was to compare the utility of MLBC with that of CPS in cervical cancer screening. A prospective study of 100 cases through MLBC and CPS was conducted from October 2009 to July 2010, in a Medical College in India, by two independent pathologists and correlated with histopathology (22 cases). Morphological features as seen through MLBC and CPS were compared. Subsequently, all the cases were grouped based on cytological diagnosis according to two methods into 10 groups and a subjective comparison was made. In order to compare the validity of MLBC with CPS in case of major diagnoses, sensitivity and specificity of the two methods were estimated considering histological examination as the gold standard. Increased detection rate with MLBC was 150%. The concordance rate by LBC/histopathology v/s CPS/histopathology was also improved (86% vs 77%) The percentage agreement by the two methods was 68%. MLBC was more sensitive in diagnosis of LSIL and more specific in the diagnosis of inflammation. Thus, MLBC was found to be better than CPS in diagnosis of precursor lesions. It provided better morphology with increased detection of abnormalities and preservation of specimen for cell block and ancillary studies like immunocytochemistry and HPV detection. Therefore, it can be used as alternative strategy for cervical cancer prevention in limited resource settings.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3841-3848
• /
• 2022

The effect of modifiers on the optical features and radiation defying ability of the Eu³⁺ ions doped multi constituent glasses was examined. XRD has established the amorphous nature of the specimen. The presence of various functional/fundamental groups in the present glasses was analyzed through FTIR spectra. The physical, structural and elastic traits of the glasses were explored. The variation in the structural compactness of the glass structure according to the incorporated modifier was enlightened to describe their suitability for a better shielding media. For the examined glasses, the metallization criterion value varied in the range 0.613-0.692, indicating the non-metallic character of the glasses with possible nonlinear optical applications. The computed elastic moduli expose the Li-containing glass (BTLi:Eu) to be tightly packed and rigid, which is a requirement for a better shielding channel. Furthermore, the optical bandgap and the Urbach energy values are calculated based on the optical absorption spectra. The evaluated bonding parameters revealed the nature of the fabricated glasses covalent. In addition, we investigated the radiation attenuation attributes of the prepared Eu³⁺ ions doped multi constituent glasses using Phy-X software. We determined the linear attenuation coefficient (LAC) and reported the influence of the five oxides Li₂O₃, CaO, BaO, SrO, and ZnO on the LAC values. The LAC varied between 0.433 and 0.549 cm^-1 at 0.284 MeV. The 39B₂O₃-25TeO₂-15Li₂O₃-10Na₂O-10K₂O-1Eu₂O₃ glass has a much smaller LAC than the other glasses.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.115-117
• /
• 2007

• 한국해안해양공학회지
• /
• 제8권2호
• /
• pp.137-145
• /
• 1996

황해ㆍ동중국해역의 M$_2$조석 잔차위 및 M$_4$ 형성에 대한 비선형항의 영향을 2차원 수심 적분된 M$_2$조석 수치모형을 이용하여 살펴보았다. 대상 해역은 황해ㆍ동중국해 전역을 포함하는 117$^{\circ}$E-130$^{\circ}$E-41$^{\circ}$N 해역으로 수치 모형의 해상도는 경ㆍ위도 방향으로 각각 1/6$^{\circ}$, l/8$^{\circ}$이며, 방사 개방 경계 조건이 사용되었다. 이류항의 영향은 음의 잔차위를 형성하는 반면 연속 방정식의 천해항의 영향은 양의 잔차위를 형성하는 상반된 효과를 보였다. M$_4$성분의 생성에 대한 이류항과 연속방정식의 천해항의 기여도는 약 90%이상으로 나타났으며, M$_4$성분의 생성에 대한 2차의 저면마찰항의 기여도는 상대적으로 작은 것으로 나타났다.