• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.5
• /
• pp.31-36
• /
• 1983

The indirect M.R.A.C. method using the W.L.S. algorithm is applied to the speed control of a D.C. motor on the assumption that the motor is the 1-st order, completely controllable and observable, non-minimum phase plant. By the help of M6809 microprocessor system the experiments are performed with respect to the sinusoidal and square reference input. The results show that the speed of a D.C. motor is well controlled by the indirect M.R.A.C. method using W.L.S, algorithm, and that the W.L.S. algorithm is quite suitable to the time-varying plant.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.25-26
• /
• 2007

• Proceedings of the Korean Vacuum Society Conference
• /
• 2007.08a
• /
• pp.188-188
• /
• 2007

• International Journal of Reliability and Applications
• /
• v.16 no.2
• /
• pp.99-111
• /
• 2015

In this paper, we study the reliability analysis of a repairable system with two types of failure in which switching failures and reboot delay are considered. Let units in this system be cold standby, and failure rate and repair rate of [type1, type2] components be exponentially distributed. The expressions of reliability characteristics - such as the system reliability and the mean time to system failure MTTF - are derived. We use several cases to graphically analyze the effect of various system parameters on the system reliability and MTTF. We also perform a sensitivity analysis of the reliability characteristics with changes in specific values of the system's parameters.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.2
• /
• pp.116-125
• /
• 2007

An experiment to acoustically analyze the shape of gill-net in the current was conducted in Jaran Bay, Gosung, Korea on the 9th to 10th September(spring tide) and 28th to 29th September(neap tide) 2006. It was measured by a 3D underwater positioning system with a radio-acoustic linked positioning buoys. Six of 7 acoustic transmitters used in the experiment were attached on the float line of the gill-net and the other was fixed on the sea bed. During spring tide, the maximum movement of the gill-net was 27.0m(22:00) in the west(4.4cm/s, $311.9^{\circ}$) and 20.6m(04:00) in the east(3.9cm/s, $66.5^{\circ}$). The maximum extension of the gill-net(the distance between P1 and P6) was 119.8m(21:00, 11.6cm/s, $321.9^{\circ}$) and the minimum was 109.9m(23:00, 16.1cm/s, $88.5^{\circ}$). During neap tide, the maximum movement was 38.0m(20:00) in the east(9.6cm/s, $278.2^{\circ}$) and 11.0m(12:00) in the west(1.9cm/s, $232.1^{\circ}$). The maximum extension was 99.6m(14:00, 12.5cm/s, $94.7^{\circ}$) and the minimum was 85.0m(06:00, 9.0cm/s, $265.8^{\circ}$). During spring tide, the maximum height of the gill-net from the sea bed was 3.7m(02:00, 7.4cm/s, $151.6^{\circ}$) and the minimum was produced the three times as 1.5m. At that time, the current speed and direction was 17.9cm/s and $85.3^{\circ}$(23:30), 16.1cm/s and $249.4^{\circ}$(05:00), and 13.7cm/s and $291.4^{\circ}$(06:30), respectively. During neap tide, the maximum height was 3.6m(12:30, 2.1cm/s, $242.3^{\circ}$) and the minimum was 1.5m(14:00, 12.5cm/s, $94.7^{\circ}$).

• Proceedings of the Korean Statistical Society Conference
• /
• 2003.10a
• /
• pp.189-194
• /
• 2003

We consider an M/G/1 queueing system under P$_{\lambda}^{M}$-service policy. As soon as the workload exceeds threshold ${\lambda}$ > 0, the service rate is increased from 1 to M ${\geq}$ 1 and is kept until the system becomes empty. After assigning several costs, we show that there exists a unique M minimizing the long-run average cost per unit time.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.308-310
• /
• 2013

Translation induced by the field-gradient force is being observed for a single ferromagnetic iron grain and a ferrimagnetic grain of a ferrite sample ($CuFe_2O_4$). From measurements on the translation, precise saturated magnetization of $M_S$ is possible for a single grain. The method is based on the energy conservation rule assumed for the grain during its translation and the grain is translated through a diffuse area under microgravity conditions. The results of the two materials indicate that a field-induced translation of grain bearing spontaneous moment is generally determined by a field-induced potential $-mM_SH(x)$ where m denotes the mass of sample. According to the above translations, the detection of $M_S$ is not interfered by any signals from the sample holder. The $M_S$ measurement does not require m value. By observing translations resulting from fieldinduced volume forces, the magnetization of a single grain is measurable irrespective of its size; the principle is also applicable to measuring susceptibility of diamagnetic and paramagnetic materials.

• Journal of Power System Engineering
• /
• v.17 no.6
• /
• pp.63-72
• /
• 2013

The main purpose of this study is to analyze the collection characteristics of multi-layer multi-stage porous plate system with ionizer and dielectric-substance experimentally. The experiment is carried out to analyze the characteristics of pressure drop and collection efficiency for the present system with experimental parameters such as applied voltage, inlet velocity, stage number and inlet particle concentration, etc. In results, for multi-layer multi-stage porous plate system of inflow type, at 5 stage and $v_{in}$=2.58 m/s, the pressure drop becomes lower 15 $mmH_2O$ as 95 $mmH_2O$ than that of non-inflow type system. It is estimated that for the present system with ionizer and dielectric-substance, the collection efficiency represents 98.5% showing higher 5.2% comparing to that of multi-layer multi-stage porous plate system without ionizer and dielectric-substance at 5 stage, $v_{in}$=2.58 m/s and inlet concentration $3g/m^3$(fly ash).

• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.05a
• /
• pp.183-185
• /
• 2016

• Wind and Structures
• /
• v.35 no.3
• /
• pp.147-155
• /
• 2022

This research proposes a wind-lens turbine design that can startup and operate at a low wind speed (< 5m/s). The performance of the wind-lens turbine was investigated using CFD and wind tunnel testing. The wind-lens turbine consists of a 3-bladed horizontal axis wind turbine with a diameter of 0.6m and a diffuser-shaped shroud that uses the suction side of the thin airfoil SD2030 as a cross-section profile. The performance of the 3-bladed wind-lens turbine was then compared to the two-bladed rotor configuration while keeping the blade geometry the same. The 3-bladed wind-lens turbine successfully startup at 1m/s and produced a torque of 66% higher than the bare turbine, while the two-bladed wind-lens turbine startup at less than 4m/s and produced a torque of 186 % higher than the two-bladed bare turbine at the design point. Findings testify that adding the wind-lens could improve the bare turbine's performance at low wind speed.