• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.5
• /
• pp.609-617
• /
• 2012

A dynamic water quality model is presented in order to simulate water quality under slowly varying flow conditions over time. To improve numerical accuracy, the proposed model uses a lumped system approach instead of extended period simulation, unlike the other available models. This approach can achieve computational efficiency by assuming liquid and pipe walls to be rigid, unlike the method of characteristics, which has been successfully implemented in rapidly varying flows. The discrete volume method is applied to resolve the advection and reaction terms of the transport equation for water quality constituents in pipes. Numerical applications are implemented to the pipe network examples under steady and unsteady conditions as well as hydraulic and water quality simulations. The numerical results are compared with EPANET2, which is a widely used simulation model for a water distribution system. The model results are in good agreement with EPANET2 for steady-state simulation. However, the hydraulic simulation results under unsteady flows differ from those of EPANET2, which causes a deviation in water quality prediction. The proposed model is expected to be a component of an integrated operation model for a water distribution system if it is combined with a computational model for rapidly varying flows to estimate leakage, pipe roughness, and intensive water quality.

• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.643-656
• /
• 2012

There has been an increase for the landslide areas and restoration expenses due, in large part, to the increased locally heavy rains caused by recent climate change as well as the reckless development. This study carried out a slope stability analysis by the application of distributed wetness index, using the GIS-based infinite slope stability model, which took the root cohesion effect into consideration, for part of Mt. Umyeon in Seoul, where landslide occurred in July 2011, in order to compensate the defects of existing analysis method, and subsequently compared its result with the case on the exploitation of lumped wetness index. In addition, this study estimated the distributed wetness index by methodology, applying three methods of specific catchment area calculation: single flow direction (SFD), multiple flow direction (MFD), and infinity flow direction (IFD), for catchment area, one of the variables of distributed wetness indices, and finally implemented a series of comparative analysis for slope stability by methodology. The simulation results showed that most unstable areas within the study site were dominantly located in cutting-area surroundings along with the residential area and the mountaintop and unstable areas of IFD and lumped wetness index method were similar while SFD and MFD provided smaller unstable areas than the two former methods.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.4
• /
• pp.61-72
• /
• 1991

A lumped deterministic model(DAWAST model) was developed to predict the daily streamflow. Since the streamflow is dominantly determined by the soil water storage in the watershed, the model takes the soil water accounting procedures which are based on three linear reservoirs representing the surface, unsaturated, and saturated soil layers. The variation of soil water storage in the unsaturated zone is traced from the soil water balance on a daily basis. DAWAST model consists of 5 parameters for water balance and 3 parameters for routing. A optimization technique of unconstrained nonlinear Simplex method was applied for the determination of the optimal parameters for water balance. Model verification was carried out to the 7 hydrologic watersheds with areas of 5.89-7,126km$^2$ and the results were generally satisfactory. The daily streamflow can be arbitrarily simulated with the input data of daily rainfall and pan evaporation by the DAWAST model at the station where the observed streamflow data of short periods are available to calibrate the model parameters.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.410-415
• /
• 2001

Hydraulic mounts have been used as an alternative to the conventional rubber mounts for they can provide more desirable stiffness and damping properties which may vary with frequency and excitation amplitude. Although a lumped-parameter non-linear model of the hydraulic mount developed by a simple fluid dynamic analysis can be successfully used for representing the inertia track dynamics, a linear model is still preferred. In this paper, an analytic technique for making a linear model of the hydraulic mount is proposed.

• Journal of Korea Water Resources Association
• /
• v.38 no.2
• /
• pp.167-177
• /
• 2005

In this study, the PRMS(Precipitation and Runoff Modeling System), developed by USGS(United States Geological Survey), was applied to the Yongdam dam watershed in the Geum River basin. The efficiency for runoff simulation and spatial characteristics of PRMS were evaluated. The runoff changes with the changes of subcatchments and HRUs were estimated. As results, the size of the subcatchment and HRV did not significantly affect the runoff at the exit of watershed. Consequently, the spatial characteristic of PRMS was shown as lumped type rather than semi-distributed. The geographical input data for Yongdam dam watershed were converted to the USGS Input type, and the parameters were calibrated using Rosenbrock optimization method, validated with the observed runoff data. The PRMS showed resonable agreements in the long-term continuous runoff simulation, if the accuracy of observed data is ensured.

• Journal of Korea Water Resources Association
• /
• v.38 no.10 s.159
• /
• pp.895-906
• /
• 2005

The diversity of observed hydrologic data and the development of geographic information system leads significant progress for developing distributed runoff models in the world. One of the typical examples is TOPMODEL, but the spatial coverage of its application Is limited on small headwater basins. The purpose of this study attempts to overcome its limitation and consequently develops a semi-distributed TOPMODEL. The developed model is composed of two components: a watershed runoff component for a lumped representation of hydrologic runoff process on the catchment scale and a kinematic wave type hydraulic channel routing component lot routing the catchment outflows. The application basin is the $2,703km^2$ upper Soyang dam site and several daily and hourly events are selected for model calibrations and verifications. The model parameters are estimated on 1990 daily event. The model performance on correlation coefficient between observed and computed flows are above 0.90 for the verification events. It is concluded that the developed model in this study can be used for flood analysis in large drainage basins.

• Journal of Korea Water Resources Association
• /
• v.38 no.9 s.158
• /
• pp.713-725
• /
• 2005

The objective of this study is to evaluate the applicability and simulation capability of PRMS, developed by U.S. Geological Survey, over the seven multi-purpose dam watersheds in Korea. The basic concepts of model components and their parameters are investigated for the evaluation of model applicability and the possibility of model parameter estimation is suggested based on the data availibility. For model parameter estimation, some parameters are directly estimated from measurable basin characteristics, but the others are estimated by Rosenbrock's automatic optimization scheme. The results show that the simulated flows from the model were very close to the observed ones. Although the default values for snowmelt model parameter are used, the results from snowmelt simulation is also acceptable. The model shows that the simulation capability is not sensitive to the basin size, however, according to increasing basin area, simulation characteristics are close to those for lumped model rather than semi-distributed model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3D
• /
• pp.431-436
• /
• 2008

Recently, the rapid development of GIS technology has made it possible to handle a various data associated with spatially hydrological parameters with their attribute information. Therefore, there has been a shift in focus from lumped runoff models to distributed runoff models, as the latter can consider temporal and spatial variations of discharge. In this research, a distributed rainfall-runoff model based on physical kinematic wave for analysis of surface and river flow was used to simulate temporal and spatial distribution of long-term discharge. The snowfall and melting process model based on Hydro-BEAM was developed, and various hydrological parameters for input data of the model was extracted from basic GIS data such as DEM, land cover and soil map. The developed model was applied for the Shonai River basin(532) in Japan, which has sufficient meteorological and hydrological data, and displayed precise runoff results to be compared to the hydrograph.

• Journal of the Society of Disaster Information
• /
• v.11 no.1
• /
• pp.107-119
• /
• 2015

The flood or inundation that occur in high-density city can paralyze urban functions and cause a lot of casualties. In this study, to minimize the damage, the disaster mitigating urban design techniques for the divided basin as disaster occurring point, disaster vulnerable site, urban responding region are applied. First of all, to do this, it is necessary to verify the effectiveness of urban design techniques by simulating them. Therefore, in this paper, the applicability of urban runoff models used in domestic disaster reduction study was investigated to analyze the outflow decrease efficiency of urban design techniques. As the reviewing results, the limitations of the lumped models such as FFC2Q and XP-SWMM are presented.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.1097-1107
• /
• 2003

The DAWAST model was originally developed to consider the variation of water storage in the unsaturated soil zone and it is a conceptual lumped model. Return flows from agricultural, domestic and industrial water were included to the original result of model simulation to calibrate model parameters of watershed runoff. Agricultural water demand was estimated only in paddy fields supposing that return flow responded at stream was originated from paddy fields. Domestic and industrial water demand was estimated by average daily water demand multiplied monthly variation coefficient. Daily inflow to the Daechung multipurpose dam was applied to verify the DAWAST model considered return flows. On annual average from 1983 to 2001, inflows were simulated to 652.5 mm with return flows considered, which was approached more closer to observed inflow of 667.3 mm, compared with case of 606.8 mm with return flows not considered.