• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.73-76
• /
• 2021

This thesis described the optical and electrical properties of the alternating current powder electroluminescent device based on Ag nanowire as a transparent electrode. The Ag nanowire electrode showed the morphology of 20 nm in diameter and 15 ㎛ in length. The transparent electroluminescent devices that were fabricated using the nanomilled ZnS : Cu, Mn phosphor by bar-coating process showed the transmittance of 67%. In order to improve the luminous efficiency, it is necessary to apply the transparent dielectric layer and increase the amount of the nanophosphor while maintaining the transmittance.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.65.2-65.2
• /
• 2020

We present NIR spectroscopic data of young radio quasars obtained from Flamingos-2 (F2) at Gemini-South. The targets are originally selected from Wide-Field Infrared Survey Explorer survey in combination with radio survey data, such as FIRST and NVSS. Our goal is to find observational evidence of jet-driven outflows, which is expected to be present in young luminous quasars from the theoretical studies. While 16 targets were observed with F2, narrow emission lines ([O III] or Hα) were detected in 7 targets. FWHM of the emission lines (up to 2500 km/s) were remarkably broad compared to ordinary quasars, revealing the presence of strong outflows. The black hole mass estimated from Eddington limit ranges from ~108 to 109 solar mass, indicating that the target quasars are likely to be progenitors of massive galaxies. Finally, we present the comparisons between the outflow velocity and the physical properties of radio jets derived from the VLA radio imaging data, in order to investigate the physical connection between the ionized outflows and radio jets.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.424-429
• /
• 2014

YAG:$Ce^{3+}$ phosphor powders were synthesized using $Al(OH)_3$ seeds by means of a PVA-polymer-solution route. Various types of PVA with different molecular weights (different polymerization) were used. All dried precursor gels were calcined at $500^{\circ}C$ and then heated at $1500^{\circ}C$ in a mix of nitrogen and hydrogen gases. The final powders were characterized via XRD, SEM, PSA, PL, and PKG analyses. The phosphor properties and morphologies of the synthesized powders were dependent on the PVA type. As the molecular weight of the PVA was increased, the particle size gradually decreased with agglomeration, and the luminous intensity of the phosphor increased. However, the phosphor powder prepared from the PVA exhibiting very high molecular weight, showed a 531 nm (blue) shift from the 541 nm (yellow) wavelength of the YAG:$Ce^{3+}$ phosphor. Finally, the synthesized YAG:$Ce^{3+}$ phosphor powder prepared from the PVA with 89,000 - 98,000 molecular weight showed phosphor properties similar to those of a commercial phosphor powder, but without a post-treatment process.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.389-396
• /
• 2010

In this paper, we reported the synthesis and electroluminescent properties of blue fluorescent styrylamine derivatives end-capped with a diphenylvinyl group. A new series of styrylamine derivatives have been synthesized via the Horner-Wadsworth-Emmons reaction. To explore electroluminescent properties of these molecules, multilayer organic lighte-mitting devices with the configuration of ITO/NPB/1-5 doped in MADN/Bphen/Liq/Al were fabricated. All devices exhibited blue emissions with good EL performances. Among those reported herein, the device using dopant 5 exhibited a maximum luminance of $24,000\;cd/m^2$ at 11.0 V, a luminous efficiency of 12.5 cd/A at $20\;mA/cm^2$, a power efficiency of 6.50 lm/W at $20\;mA/cm^2$, and $CIE_{x,y}$ coordinates of (x = 0.173, y = 0.306) at 8.0 V, all of which demonstrate the superiority of these materials in blue OLEDs.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.313-315
• /
• 2017

We present physical properties of $24{\mu}m$ galaxies detected by AKARI and Spitzer and their evolution between redshifts 0.4 < z < 2. Using multi-wavelength data from X-ray to radio observations in NEP Deep Field (for AKARI) and Subaru/XMM-Newton Deep Field (for Spitzer), we derive photometric redshift, stellar mass, star-formation rate (SFR), dust extinction magnitude and rest-frame luminosities/colors of the $24{\mu}m$ galaxies from photometric SED fitting. We infer the SFRs from rest-frame ultraviolet luminosity and total infrared luminosity calibrated against Herschel photometric data. For both survey fields, we obtain complete samples with stellar mass of > $10^{10}M_{\odot}$ and SFR of > $30M_{\odot}/yr$ up to z = 2. We find that specific SFRs evolves with redshift at all stellar masses in NON-power-law galaxies (non-PLGs) as star-formation dominant luminous infrared galaxies (LIRGs). The correlations between specific SFR and stellar mass in the Spitzer and AKARI galaxy samples are well consistent with trends of the main sequence galaxies. We also discuss nature of PLGs and their evolution.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.7
• /
• pp.610-614
• /
• 2008

In this work, the electrical and optical properties of the two different p-type GaN electrode schemes, ZnNi/ITO and ZnNi/Au, were compared each other, and applied to the top-emitting GaN/InGaN light-emitting diodes (LEDs). The ZnNi/ITO electrode showed much higher transmittance (90%) and slightly lower contact resistance $(1.27{\times}10^{-4}{\Omega}cm^2)$ than those (77%, $(2.26{\times}10^{-4}{\Omega}cm^2)$) of the ZnNi/Au at a wavelength of 460 nm. In addition, GaN LEDs having ZnNi/ITO showed accordingly higher light output power and luminous intensity than those having ZnNI/Au did at the current levels up to 1 A.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2001.08a
• /
• pp.209-212
• /
• 2001

We report the synthesis and characterization of new alkoxy substituted spirobifluorene derivatives. The spiro compounds having alkoxy hydrocarbon chains were readily soluble in common organic solvents, having improved film-forming properties and had a significantly reduced tendency to crystallize, resulting in increasing their service lifetime. The results of DSC showed that it was amorphous. The optical and electroluminescent spectra were characterized. Electroluminescence (EL) properties of three-layer light emitting diodes (LED) of $ITO/TPD/spirobifluorene/Alq_3/LiF/Al$ as the active layer were characterized. Blue emission peaking of the EL spectrum of the three-layer device at 402 nm and a luminance of 3,125 $cd/m^2$ were achieved at a drive voltage 12.8 V. The luminous efficiency was obtained to be 1.7 lm/W. The color coordinate in CIE chromaticity is (0.16, 0.09), which is in a pure blue region. The external quantum efficiency was obtained to be 2.0%. The results indicate that the spirobifluorene compounds having alkoxy hydrocarbon chains are strongly potential blue emitters for LED applications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.8
• /
• pp.679-687
• /
• 2001

It is known that amorphous BaTiO$_3$ thin films have good insulating properties[1][2]. In this investigation, amorphous BaTiO$_3$ thin films were deposited by rf magnetron sputtering on thick BaTiO$_3$ films of AC powder EL devices which were fabricated by screen-printing. The electrical and optical properties of the EL devices were then investigated. Adding amorphous BaTiO$_3$ thin film, it showed that leakage current density was decreased. Especially, leakage current density was decreased more with he sample of 0.5-hour deposition than the sample of 4-hours deposition. This result led to the improvement of luminous efficiency by 11%. It could be concluded that proper amorphous BaTiO$_3$ thin film deposition improved the surface property of dielectric layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.169-172
• /
• 2009

We developed ultra-accelerated quantum chemical molecular dynamics and characterization simulators for study and design of plasma display panel (PDP) related materials. By use of these simulators, realistic structure of PDP materials is drawn on the computer. Furthermore, based on the structures, various properties such as secondary electron emission coefficient are successfully evaluated. In this report, we will discuss the theoretical secondary electron emission coefficient for several protecting layer materials and the effect of surface structure on the properties based on the result of atomistic simulations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2038-2042
• /
• 2010

In this paper, we confirmed the thermal & optical properties for improving the heat transfer coefficient by changing the via hole size and in FR4 PCB with the same area. Osram 1W power LED Package (Golden Dragon) was used and the K-factor which is relative constant between LED junction temperature and forward bias was measured with power source meter(KEITHLEY 2430) to measure the thermal resistance from PCB configuration. As results, thermal resistance in metal PCB came out to the lowest as $26 [^{\circ}C/W]$ and thermal resistance in FR4 PCB without via-holes emerged as the highest as $69 [^{\circ}C/W]$. However thermal resistance of FR4 PCB could have decreased until $32[^{\circ}C/W]$ in 0.6 mm by using the via hole. Also, the luminous flux could have improved, too.