• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.159-162
• /
• 2009

Surface lighting using OLEDs for desk/task lighting has been analyzed its electrical and optical characteristic with a fluorescent lamp which has triple wavelength peak. We have confirmed the good possibility of OLEDs for desk/task lighting. Our engineering sample which has fabricated by co-worker has its characteristics which are luminous efficacy 11.781m/W at 509mW, CRI Index 75, CCT 4479K, CRI coordinate x=0.378, y=0.4547, respectively. Addinationly another OLEDs samples are used for compartive analysis in view of desk/task lighting.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1391-1394
• /
• 2007

In this work, the discharge characteristics and temporal distribution of surface charges on the Sidoped MgO have been investigated and elucidated with the results of photon-induced surface current. Even though the Si doped MgO shows lower static voltage margin, higher luminous efficacy, and shorter statistical delay time, its discharge characteristics become deteriorated as the timing of scanning is delayed from the ramp type reset pulse down. Overall features of Si-doped MgO in discharge characteristics are well correlated with surface current characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1189-1192
• /
• 2008

A new mercury-free flat fluorescent lamp with a single cell having dimension 2.2inches across the diagonal, had been developed which shows a wide, stable operating voltage margin, high luminance and luminous efficacy by adopting the bipolar pulse drive scheme. In this paper, the single cell is expanded into a multi-structured configuration to realize a 32inch sized panel across the diagonal by a simple repetition of the single cells. A driving scheme is proposed for a 2-bit areal selective dimming using dual auxiliary electrodes and bipolar drive scheme.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.404-407
• /
• 2008

Several ITO-less PDP cell structures are presented to improve luminous efficacy. The ITO-less PDP have been applied recently at actual panel manufacture. The influence of ITO-less PDP cell structure on the discharge characteristics has been investigated by using three-dimensional fluid simulation. The variations of electrode geometry parameters such as gap distance, cross bar length, and hump length are investigated for the optimization of cell design.

• KIEAE Journal
• /
• v.2 no.2
• /
• pp.33-38
• /
• 2002

There are a number of practical uses for devices which are capable of piping large amounts of light: illumination of areas where there would be maintenance, safety, or security problems with electronic light sources; piping sunlight into indoor areas for illumination; and the conversion of high luminous efficacy, good color quality, high intensity discharge lamps into more acceptable linear of area sources of light. Prism light guides are hollow structures which pipe light by means of total internal reflectin(TIR). These devices are unique in their ability to combine the efficiency of TIR with the relatively low cost of hollow structure. An important application stems from their ability to transform a point source of light such as an incandescent or discharge lamp into a linear or area source of light or illumination. We report the development of an economical, flexible prismatic film for fabricating the light guide wall. This guide geometries and films are currently under development.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.8
• /
• pp.1566-1571
• /
• 2009

The discharge electrodes in ac PDP are coated with dielectric layer, and transparent MgO thin films are deposited on the dielectric layer. The main role of the MgO thin films in ac PDP is to protect the dielectric layer from sputtering by ion bombardment in the glow-discharge plasma. An additional important role of the MgO thin film is the high secondary electron emission coefficient which leads the low firing voltage and low cost of the PDP. In this paper, we investigated the relations of the crystal orientation about deposition thickness, deposition rate, temperature of substrate, and distance between the MgO tablet and the substrate. Additionally, we investigated the discharge characteristics of the AC PDP using nano-powder MgO tablet

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1989.10a
• /
• pp.9-12
• /
• 1989

ABSTRACT -- Recently, a method of magnetically-enhanced discharge columns is considered to increase the luminous efficacy of discharge lamps, which is based upon the face that the diffusion motion of charged particles in the discharge column strongly depends on the applied magnetic fields. This study investigates the effect of applied transverse magnetic fields on the light output of low-pressure Hg-Ar discharge. As a result, it is found that the electric field in the positive column increases according to the applied megnetic field, which causes an increase in the total light output. And this effect is much more pronounced upon the spectral line originating form the higher levels.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.12
• /
• pp.15-21
• /
• 2015

We proposed 50W-LED modules of using Heat-pipe and Stack-fin and produced LED modules was evaluated heat dissipation characteristics with comparison of the conventional die-casting type. It verified the application of products by applying it to 150W-LED road luminaires through simulation. The LED module was measures aimed design temperature of the Stack-fin and showed 26% upward heat dissipation effect than a conventional die-casting type. The luminous efficacy of 150W-LED road luminaires using this LED module reached over 112lm/W, and the simulation results showed average of horizontal luminance, overall luminance uniformity($U_O$) and lane luminance uniformity($U_I$) that is suitable for five-lane road with the KS standards.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.2
• /
• pp.126-131
• /
• 2014

In this paper, plant crops used in the region to grow crops for the LED lighting area of a rectangle to fit the light distribution to maximize the efficiency of a rectangular distribution was made of LED lights. After the fabrication of LED lamps, light distribution, and in the area of $1.2m{\times}3m$ was the analysis of Illuminance chart. As a result of examining the performance light distribution for total Emin/Eav is 56%, and the target area of the light distribution compared to normal lamps Emin/Eav is improved by about 17%. In addition, plants grown in the area to minimize the outgoing light distribution can be focused on the cultivation area, according to the distance of the plants and be able to have the best luminous efficacy is judged.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2244-2248
• /
• 2008

High intensity metal halide discharge lamp performance, specifically the generated luminous flux and light color content, depends critically on the arc tube design. Factors influencing the design and consequent lamp efficacy include : lamp size, geometry, arc tube composition, fill chemistry, electrode design and excitation modes. Shaping of Polycrystalline Alumina(PCA) can be realized by conventional ceramic processes. Several processes are applied nowadays. Well-known in the ceramic high pressure field for decades are the pressing and the extrusion method. Newly developed slurry and precious forming technologies give the one-body seamless tubes, which improve thickness uniformity and lighting performance. Now, we reported some optical properties with different arc tube structures of ceramic metal halide lamps.