• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.79-82
• /
• 2002

In this paper, we investigate the characteristics of luminous efficacy as a function of Xe partial pressure in AC PDP. SDR structure has shown much larger increment of luminous efficacy compared with the conventional one especially below 10% Xe contents. The luminous efficacy around 4.0 lm/W is achieved with Ne-Xe10%, 400Torr in Monochrome green phosphor test panel under 10kHz continuous sustaining frequency.

• 전기의세계
• /
• 제31권3호
• /
• pp.197-203
• /
• 1982

The effects on the characteristics of 20-W fluorescent lamp were studied when applying magnetic field to its positive column. First, when the direction of the magnetic field is axial, i.e., along the lamp, if the magnitude of the field is stronger than the critical field, lamp voltage is increased, lamp current decreased, luminous flux increased, starting voltage decreased, as increasing the applied magnetic field. At the magnetic flux density is 130 gauss, luminous flux is increased to about 6 percents and starting voltage is increased to about 45 percents. Second, when the direction of the magnetic field is transverse to the lamp axis, as increasing the applied magnetic field, lamp voltage is increased, lamp current decreased, luminous flux increased and starting voltage is nearly constant, but the rates of increase or decrease of this case is different from those of the first. At the magnetic flux density is 300 gauss, luminous flux is increased about 45 percents. In both cases, electric power dissipated by lamps is the same as that of the lamp which magnetic field is not applied to.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1401-1403
• /
• 1995

This paper investigates the light output characteristics of an electrodeless H-discharge lamp. The existing cylindrical fluorescent lamps were wound around with an induction coil of varying size, and were driven by RF power. The light output and the luminous efficacy were measured according to variations of the induction coil gap and the lamp power, respectively. The experimental results show that the luminous efficacy of the lamp is as much as existing electrodeless lamps and the luminous efficacy of lamps are high between 10W and 20W. Theoretical analyses using computer simulation show that the circuit matching is easier in the external coil configuration than in the internal one, and that the current and the power distributions near the coil are shower in t.

• 조명전기설비학회논문지
• /
• 제18권4호
• /
• pp.15-21
• /
• 2004

광속구(integrating sphere photometer), 분광기(monochromator)등을 이용하여 노랑색(Y), 녹색(G), 백색(W)의 SMD(surface mounted device)형태의 HB LED(high brightness light emitting diode)에 대한 광속(luminous flux, LF), 상관 색온도(correlated color temperature, CCT), CIE 색도좌표(chromaticity coordinate CC)등 광특성을 실험하여 그 결과치를 비교 분석하였고, 백색 LED에 대해서는 연색지수를 고찰하였다.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2441-2445
• /
• 2009

The effects of Si -doped MgO have been investigated in order to improve the material properties of the MgO protective layer in plasma display panels. A small amount of Si is added to the MgO pellet while the MgO layer is being deposited by using an electron-beam evaporation method. Both the surface characteristics of the protecting layer and the electro-optical properties of 4 in. test panels are investigated, such as XRD patterns, SEM images, firing and sustain voltages, secondary electron emission coefficient($\gamma$), luminance, luminous efficacy and lifetime. The firing and sustain voltage are minimized when Si concentration is 0.038%, where the luminance and luminous efficacy increase up to 17% and 26% compared with that of the pure MgO film, separately, and lifetime also shows good characteristics.

• Journal of Information Display
• /
• 제5권1호
• /
• pp.7-15
• /
• 2004

A highly simplified backlight unit mainly composed of diffractive grating in sub-micron order imprinted light-guide plate (LGP) is proposed for edge-lit backlight unit. Optical characteristics of the imprinted LGP are examined by RCWA and the performance is verified through Monte Carlo simulation. Results show that the diffraction efficiency, luminous flux and its uniformity over the area are significantly affected by the angle of incident ray. Consequently couples of design considerations are additionally proposed to enhance luminous flux. In terms of peak luminance and out-coupling luminous flux, the experimental results are agreed well with the performance simulation. Finally, compared with optical characteristics of conventional backlight unit, we could conclude that the proposed simplified backlight unit made of diffractive grating imprinted light-guide plate is a good substitute for the conventional backlight unit.

• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.173-176
• /
• 2003

We have seen the effects of buffer layer in organic light-emitting diodes using poly(N-vinylcarbazole)(PVK). Polymer PVK buffer layer was made using static spin-casting method. Two device structures were made; one is ITO/TPD/Alq3/Al as a reference and the other is ITO/PVK/TPD/Alq3/Al to see the effects of buffer layer in organic light-emitting diodes. Current-voltage characteristics, luminance-voltage characteristics and luminous efficiency were measured with a variation of spin-casting speeds. We have obtained an improvement of luminous efficiency by a factor of two and half when the PVK buffer layer is used.

• 한국어병학회지
• /
• 제20권2호
• /
• pp.99-108
• /
• 2007

본 연구는 V. harveyi의 luminescence 유무와 해수 어류에 대한 병원성의 관계를 알아보고자 non-luminous V. harveyi 와 luminous V. harveyi 분리 균주로 조피볼락에 대한 병원성 시험을 시행하였다. 시험 균주 V. harveyi 모두 haemolytic activity를 나타내었으며, 어체 내 생존능은 non-luminous V. harveyi 분리 균주 FR 2가 강한 생존능을 나타내었다. 또한 조피볼락에 인위 감염시, non-luminous V. harveyi 분리 균주 FR 2가 강한 병원성을 나타내었으며 luminous V. harveyi 분리 균주 VIB 391은 낮은 병원성을 나타내었다. 결론적으로 조피볼락에서는 non-luminous V. harveyi 분리 균주 FR 2가 강한 병원성을 나타내었으며 luminous V. harveyi 분리 균주 VIB 391은 매우 약한 병원성을 나타내어 luminescence의 유무에 따라 해수 어종에 대한 병원성의 차이가 있을 것으로 생각된다

• 한국재료학회지
• /
• 제31권10호
• /
• pp.586-591
• /
• 2021

This paper proposes a mathematical model that can calculate the luminescence characteristics driven by alternating current (AC) power using the current-voltage-luminance (I-V-L) properties of organic light emitting devices (OLED) driven by direct current power. Fluorescent OLEDs are manufactured to verify the model, and I-V-L characteristics driven by DC and AC are measured. The current efficiency of DC driven OLED can be divided into three sections. Region 1 is a section where the recombination efficiency increases as the carrier reaches the emission layer in proportion to the increase of the DC voltage. Region 2 is a section in which the maximum luminous efficiency is stably maintained. Region 3 is a section where the luminous efficiency decreases due to excess carriers. Therefore, the fitting equation is derived by dividing the current density and luminance of the DC driven OLED into three regions, and the current density and luminance of the AC driven OLED are calculated from the fitting equation. As a result, the measured and calculated values of the AC driving I-V-L characteristics show deviations of 4.7% for current density, 2.9 % for luminance, and 1.9 % for luminous efficiency.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.83-89
• /
• 2013

In order to reduce the power consumption in international standard IEC62087, the luminance efficiency should be improved at the low discharge load rather than at the high discharge load. Thus, this paper analysed the characteristics of the discharge at the panels with ITO Gap of $65{\mu}m$, $80{\mu}m$, and $100{\mu}m$ in 50-inch PDP with FHD resolution. It was well known that the long gap panel improves the luminance and the luminous efficiency. However, it is very difficult to drive the panel due to high driving voltage. When the normal driving method was applied at the panel with ITO gap of $100{\mu}m$, the phenomenon of the double peak was generated in the sustain period. We confirmed that main factor of the double peak is the self-erasing discharge. When the CLHS driving method was applied at the panel with ITO gap of $100{\mu}m$, the self-erasing discharge was improved in the sustain period. Also, the $V_S$ and $V_A$ minimum voltage of the CLHS driving method decreased about 9V and 12V compared with those of the normal driving method. Moreover, when the CLHS driving method was applied to the panel with ITO gap of $100{\mu}m$, the luminance and the luminous efficiency increased compared with those of the normal driving method. The luminance and the luminous efficiency greatly increased at the low discharge load. The less discharge load, the higher increase rate of the luminance and the luminous efficiency. Especially, the luminous efficiency at ITO gap of $100{\mu}m$ increased about 26.3% at the discharge load of 4% compared with that at ITO gap of $65{\mu}m$.