• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.447-450
• /
• 2003

In this paper, new luminescent material, 6,11-dihydoxy-5,12-naphtacene-dione Alq3 complex (Alq2-Ncd), 1,4-dihydoxy-5,8-naphtaquinone Alq3 complex(Alq2-Nq) was synthesized. And extended efforts had been made to obtain high-performance electroluminescent(EL) devices, since the first report of organic light-emitting diodes(OLEDS) based on tris-(8-hydroxyquinoline) aluminum(Alq3). We have performed investigate characterization of the materials. Current-voltage characteristics, luminance-voltage characteristics and luminous efficiency were measured by Flat Panel Display Analysis System(Model 200-AT) at room temperature. An intensive research is going on to improve the device efficiency using the hole injection layer, different electrodes, and etc. By using the hole injection layer, the charge-injection can be controlled and the stability could be improved. This study indicates not only the sterical effect but also some other effects would be responsible for the change of the emission wavelength.

• 조명전기설비학회논문지
• /
• 제16권1호
• /
• pp.106-113
• /
• 2002

본 연구는 방전쳄버내에 각종 가스의 압력(58.8-137.3[kPa]) 변화에 따른 순수가스인 Kr, Ar 및 $N_2$가스의 절연 특성을 조사하고, 혼합가스인 Ar/$N_2$및 Kr/$N_2$가스의 절연 특성과 비교하였다. 또한, 실용 백열전구내의 혼합가스에 위한 각종 특성을 조사하였다. 실험 결과, $N_2$가스의 압력변화에 따른 절연 특성은 큰 분자량을 가진 Kr 및 Ar가스에 비하여 증가되었으며, 가스의 압력이 증가됨에 따라 절인파괴전압은 증가되었다. Ar/$N_2$및 Kr/$N_2$가스의 절연파괴전압은 $N_2$가스의 혼합비가 적을수록 감소되었으며, Kr(70%)$N_2$(30%)가스의 코로나개시전압은 Ar(70%)/$N_2$(30%)가스에 비해 증가되었다. 일반 백열전구에 Ar(70%)/$N_2$(30%)가스인 경우에 비해, Kr(70%)/$N_2$(30%)가스에서 광속과 수명이 대략 94[lm] 및 380[hr]으로 증가되었다. 백열전구내의 냉각온도가 20[$^{\circ}C$]일 때 혼합가스 주입압력은 40[$^{\circ}C$])에 비해 대략 13[%] 증가되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1517-1522
• /
• 2011

Recently, application of LED luminaires has been issued for energy saving plan. In this paper, we carried out a study to replace a low efficacy sealed-beam lamp for headlight of railroad vehicles with LED luminaire. Electrical and optical characteristics of the sealed-beam lamp were analyzed and a LED headlight was designed and fabricated. Total luminous efficacy and rated power of the prototype LED headlight were 82 lm/W ; about 5 times higher, and 40W ; about 4 times lower than the sealed-beam lamp, respectively. Especially, lifetime of the sealed-beam lamp is short as 1,000 hours due to the evaporation and vibration of filament, but that of LED headlight is over 30,000 hours long.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.159-162
• /
• 2009

Surface lighting using OLEDs for desk/task lighting has been analyzed its electrical and optical characteristic with a fluorescent lamp which has triple wavelength peak. We have confirmed the good possibility of OLEDs for desk/task lighting. Our engineering sample which has fabricated by co-worker has its characteristics which are luminous efficacy 11.781m/W at 509mW, CRI Index 75, CCT 4479K, CRI coordinate x=0.378, y=0.4547, respectively. Addinationly another OLEDs samples are used for compartive analysis in view of desk/task lighting.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.53-56
• /
• 2008

A photovoltaic panel is a device that, through the photovoltaic effect, converts luminous energy into electric energy. Photovoltaic generation system used infinity of solar energy, cost of fuel is needless and there in no air pollution or waste occurrence. This paper summarizes the results of these efforts by offering a photovoltaic system structure in 30[kW] large scale applications installed in Mokpo National University dormitory roof. The status of photovoltaic system components, are inter-connection and safety equipment monitoring system will be summarized as this article. This describes configuration of utility interactive photovoltaic system which generated power supply for dormitory. In this paper represent 30[kW] utility photovoltaic system examination result.

• Journal of Information Display
• /
• 제4권4호
• /
• pp.19-24
• /
• 2003

By using vacuum in-line driving and photoluminescence measuring system, we have examined the electrical and optical characteristics of plasma display panel produced by vacuum in-line sealing technology. In addition, the relationship between luminous efficiency and base vacuum level before filling discharge gas was analyzed. In the case of base vacuum level of $1.33{\times}10^{-1}$ Pa, the firing voltage of a 2-inch diagonal PDP panel was ranged from 312 to 343 V depending on the discharge gas pressure of $2.667{\times}10^4$ to $4{\times}10^4$ Pa at room temperature, Whereas in the case of $1.33{\times}10^{-4}$ Pa, the firing voltage was reduced by 40 V and luminescence was improved slightly.

• Journal of Information Display
• /
• 제7권4호
• /
• pp.1-4
• /
• 2006

The optical performances of rounded prism films were investigated using a ray tracing technique. The angular distribution of the luminous intensity was obtained as functions of the prism pitch and the curvature of rounded apex and valley of prism arrays. The gain of the on-axis luminance decreased with decreasing curvature (increasing diameter) and pitch. The existence of the curved area on the prism film decreased the recycling efficiency of the prism film, i.e., the rays which would otherwise have been recycled through total internal reflections via the prism surfaces were refracted on the curved regions and redirected toward directions other than the on-axis direction. Quantitative correlation between the luminance gain and the curvature in addition to the prism pitch was obtained, which might serve as basic data for the optimization of prism films and the manufacturing processes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.404-407
• /
• 2008

Several ITO-less PDP cell structures are presented to improve luminous efficacy. The ITO-less PDP have been applied recently at actual panel manufacture. The influence of ITO-less PDP cell structure on the discharge characteristics has been investigated by using three-dimensional fluid simulation. The variations of electrode geometry parameters such as gap distance, cross bar length, and hump length are investigated for the optimization of cell design.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1050-1053
• /
• 2006

We fabricated white organic light emitting diodes consisting of three emitting layers of red-emitting DCM2 doped ${\alpha}-NPD$, blue-emitting DPVBi and green-emitting C545T doped Alq3. By optimizing the thickness of the hole-transport layer of ${\alpha}-NPD$ and the electron-transport layer of Alq3, efficient white OLEDs were obtained with a luminous efficiency of 4.40lm/W at luminance of $1000cd/m^2$, and a max-imum luminance of $51,939cd/m^2$

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.974-977
• /
• 2003

A new series of statistical alternating EL copolymer, poly[bis{2-(4-phenylenevinylene)-2-cyanoethenyl}- 9,9-dihexyl-9H-fluorene-2,7-yl-alt-1,4-phenylene vinylene] (polymer-I) was synthesized by the modified Heck coupling reaction, and their EL characteristics were also investigated. Double layer polymer light-emitting display (PLED) with the configuration of ITO/PEDOT/polymer/Al devices show maximum brightness and luminous efficiency up to 3000 $cd/m^{2}$ at 30 V and 0.07 lm/W at 21 V, respectively.