• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.3-8
• /
• 2002

In this paper, We measured an electric and optical characteristics for electrodeless fluorescent lamp system. We used the CCD(charged couple device) and Integrating Sphere Photometer to detect the accurate variation of data and got a characteristic of output voltage and current, luminance, luminous flux etc. And then we come to understand that the efficiency of electrodeless fluorescent lamps are similar to CFLs(compact fluorescent lamp) or HID(high intensity discharge lamp).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1372-1375
• /
• 2007

MgO thin films were deposited by $O^+$ IBAD method and results showed assisting oxygen ion beam energy plays a significant role in characteristics of MgO thin films. The lowest firing inception voltage, the highest brightness and the highest luminous efficiency were obtained when oxygen ion beam energy was 300 eV.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.91-94
• /
• 2003

We studied the effect of barrier rib height variation using ray-optics code incorporated with three-dimensional plasma simulation to analyze the effects of cell geometry for varying pressure conditions. The optimal barrier rib height decreased as the Xe partial pressure increased which resulted in due to the formation of local, strong sheath under high Xe partial pressure condition.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.377-382
• /
• 2003

본 연구의 대상인 자체발광 유리관은 밀봉된 유리관 내의 삼중수소에서 방출되는 베타입자와 유리관 내벽의 형광체와의 발광반응 메카니즘을 이용한 것이다. 자발광체는 삼중수소의 자연 붕괴와 형광체의 열화에 의해서 형광 효율이 감소되어 자발광체를 제조한 날로부터 지속적으로 휘도가 줄어들게 된다. 본 연구에서는 자발광체 제조 시 형광체의 열화를 최소화하기 위하여 형광체 열화에 영향을 미치는 요소인 온도, 온도 유지 시간, 공정 시 필요한 분위기를 다꾸지 방법에 의한 실험계획법으로 3인자 3수준의 교호작용을 고려하여 형광체의 음극선 발광 특성을 검토하였다.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.143-145
• /
• 1997

특수변압기의 일종인 네온 변압기의 기본원리와 특성을 조사하고 원가절감, 효율향상등 특성개선을 위하여 누설자속의 해석기술과 규소강판의 압연방향에 따른 자속의 영향, 압연방향성 코아의 형상설계방향 등을 제시한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.578-581
• /
• 2007

Microplasma modes generated in a display cell with an auxiliary electrode were investigated in accordance with various coplanar-gaps and plategaps. At plate-gaps shorter than the coplanar-gap, the mode transition voltage of the auxiliary pulse increased with an increase in the coplanar-gap. At longer plate-gaps, the mode transition voltage of the auxiliary pulse decreased with an increase in the coplanar-gap.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.183-188
• /
• 2005

Instead of the incandescent lamps the LED lamps have been used on the traffic signal lamp with the advantages of small loss, no lens and long life. In this paper, we have compared three kinds of the LED controller structures and showed the LED array decision methods. We studied the temperature characteristics on LED and the temperature compensation network. The experimental results showed that the electrical characteristics of three kinds of the LED controller structures were different each other. We concluded that the temperature compensation is the important technique, the best compensation network has the ${\pm}10%$ variation for the luminous intensity.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.135-138
• /
• 2006

OLEDs are attractive because of possible application in display with low operating voltage, low power consumption, self-emission and capability of multicolor emission by the selection of emissive material. We investigated the effects of deposition rate on the electrical characteristics, physical characteristics and optical characteristics of OLEDs in the ITO(indium-tin-oxide)/N,N'-diphenyl-N,N'-bis(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD)/tris(8-hydroxyquinoline)aluminum($Alq_3$)/Al device. We measured current density, luminous flux and luminance characteristics of devices with varying deposition rates of TPD and $Alq_3$. It has been found that optimal deposition rate of TPD and $Alq_3$ were respectively $1.5{\AA}/s$ from the device structure. An AFM measurement results, surface roughness of the deposited film was the lowest when deposition rate was $1.5{\AA}/s$.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.752-756
• /
• 2002

Green-emitting $Zn_2SiO_4:Mn$ phosphors for PDP(Plasma Display Panel) application were synthesized by colloidal seed-assisted spray pyrolysis process. The codoping with $Gd^{3+}/Li^+$, which replaces $Si^{4+}$ site in the willemite structure, was performed to improve the luminous properties of the $Zn_2SiO_4:Mn$ phosphors. The particles prepared by spray pyrolysis process using fumed silica colloidal solution had a spherical shape, small particle size, narrow size distribution, and non-aggregation characteristics. The $Gd^{3+}/Li^+$ codoping amount affected the luminous characteristics of $Zn_2SiO_4:Mn$ phosphors. The codoping with proper amounts of $Gd^{3+}/Li^+$ improved both the photoluminescence efficiency and decay time of $Zn_2SiO_4:Mn$ phosphor particles. In spray pyrolysis, the post-treatment temperature is another factor controlling the luminous performance of $Zn_2SiO_4:Mn$ phosphors. The $Zn_{1.9}SiO_4:Mn_{0.1}$ phosphor particles containing 0.1 mol% $Gd^{3+}/Li^+$ co-dopant had a 5% higher PL intensity than the commercial product and 5.7 ms decay time after post-treatment at $1,145^{\circ}C$.

• Animal Systematics, Evolution and Diversity
• /
• v.32 no.1
• /
• pp.28-37
• /
• 2016

We describe the morphological characteristics of two morids, Gadella jordani and Physiculus japonicus, belonging to the order Gadiformes, based on Korean specimens collected from the Korean ocean. Two specimens of Gadella jordani was first collected from Jeju Island, Korea and the East Sea, Korea, in 2013-2014. This species is characterized by 8, 67-69 dorsal fin rays, 66-71 anal fin rays, 5+13 gill rakers, no barbel on the lower jaw, no vomerine teeth, and a ventral luminous organ closer to the anus than to the interventral line. We described it as the first record to the Korean fish fauna, and proposed the new Korean name "Min-su-yeom-dae-gu-sok" for the genus Gadella, and "Min-su-yeom-dae-gu" for the species G. jordani. Physiculus japonicus was first reported by Koh and Moon in the year 1999 based on a single specimen in Korea. However, no study has been attempted to describe the morphological characteristics in Korea since then. In 2013-2014, three specimens of P. japonicus was collected from Jeju Island, Korea and the East Sea, Korea, and we redescribe P. japonicus in detail. This species is characterized by 9-10, 63-64 dorsal fin rays, 70-73 anal fin rays, 3+7-8 gill rakers, a short barbel on the lower jaw, and a ventral luminous organ equidistant between the interventral line and the anus.