• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.10-16
• /
• 2005

This paper suggested the sulfur lamp power supply using Fuzzy Gain Scheduling(FGS), which was designed and confirmed the performance through manufacturing. it was based on Series Resonant Half Bridge Inverter(SRHBI), so that was applied Pulse Frequency Modulation(PFM), Zero Voltage Switching(ZVS), soft switching and soft start for input power variation and output power compensation. In order to get the lengthened life time of magnetron and stabilized output or power, power ratter and efficiency were improved by fuzzy gain algorism. It also made it possible to get not the existing foxed output power but continuous variable output power$(900\~1250[W])$. The manufactured power supply showed good results in input power $220[V]{\pm}15[\%]$ with stabilized output of power, luminous efficiency 97[1m/W] and power factor $96[\%]$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.773-776
• /
• 2002

Efficient organic white light-emitting diodes are fabricated by doping [bis(2-methyl-8-quinolinolato) (tripheny-siloxy)aluminium (III)] (SAlq), a blue-emitting layer, with a red fluorescent dye of 4-dicyanomethylene-2-methyl-6-{2-(2,3,6,7-tetrahydro-1H,5H-benzo[i,j]quinolizin-8-yl)vinyl}-4H-pyran (DCM2). The incomplete energy transfer from blue-emitting SAlq to red-emitting DCM2 enables to obtain a balanced white light-emission. A device with the structure of ITO/TPD (50 nm)/SAlq:DCM2 (30 nm, 0.5 %)/$Alq_3$ (20 nm)/LiF (0.5 nm)/AI shows emission peaks at 456 nm and 482 nm from SAlq and at 570 nm from DCM2. The white light-emitting device shows an external quantum efficiency of about 2.3 %, a luminous efficiency of about 2.4 lm/W, and the CIE chromaticity coordinates of (0.32, 0.37) at 100 cd/m^2. A maximum luminance of about 23,800 cd/m^2. is obtained at 15 V and the current density of 782 mA/cm^2.

• Korean Journal of Optics and Photonics
• /
• v.31 no.2
• /
• pp.81-87
• /
• 2020

This study examines the design technology of searchlight optics featuring narrow beam angles and high luminous intensities. Halogen and xenon lamps, which are conventional searchlight sources, are vulnerable to vibration and shock, and are large and heavy, making them difficult to transport. In addition, the parabolic mirror located at the rear of the searchlight has the disadvantages of poor performance and low light efficiency, due to the assembly error produced during manufacturing. To solve this problem, a 1-kW halogen lamp is replaced by a 150-W high-power COB LED, and a high-efficiency TIR lens is designed to meet the target performance. Afterward, the TIR lens array is proposed to solve the surface error generated during optical injection. After a prototype is manufactured based on the designed optical system, the optical performance is confirmed to be excellent, by comparing it to that of a commercial halogen-lamp searchlight.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.399-405
• /
• 2013

Two series of new green phosphorescent polymers bearing a bis(2-phenyl-pyridine)iridium(III)(dibenzoylmethane) [$(ppy)_2Irdbm$] complex were designed and synthesized. Poly-carbazole (PCbz) derivative or polyfluorene with pendant carbazole groups (PFCbz) were employed as host polymers for the iridium complex. The iridium complex monomer was copolymerized with the host monomers using varying monomer ratios via a Yamamoto coupling reaction. Efficient energy transfer from host to dopant unit was observed by increasing the ratio of the iridium guest in the copolymers. Electroluminescent devices with the configuration ITO/PEDOT:PSS/polymer/BmPyPB/LiF/Al were fabricated and characterized. The phosphorescent polymers composed of the iridium complex guest and polyfluorene with carbazole pendants as a host performed better than the polymers composed of the same guest and the main chain polycarbazole host. A maximum external quantum efficiency of 0.73%, a luminous efficiency of 1.21 cd/A, and a maximum luminance of 372 $cd/m^2$ were obtained from a device fabricated using one of the synthesized copolymers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.402-403
• /
• 2007

High-efficiency white organic light-emitting diodes (WOLEDs) were fabricated with two emissive layers and a spacer was sandwiched between two phosphorescent dyes which were, bis(3,5-Difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium III (FIrpic) as the blue emission and bis(5-acetyl-2-phenylpyridinato-N,C2') acetylacetonate $((acppy)_2Ir(acac))$ as the red emission. This spacer effectively prevented a triple-triple energy transfer between the two phosphorescent emissive layers with blue and red emission that was showed a improved lifetime. The white device showed Commission Internationale De L'Eclairage $(CIE_{x,y})$ coordinates of (0.33, 0.42) at $22400\;cd/m^2$, a maximum luminance of $27300\;cd/m^2\;at\;0.388\;mA/cm^2$, and a maximum luminous efficiency of 26.9 cd/A.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.291-294
• /
• 2010

In this study, we demonstrated high-efficiency blue organic light-emitting diodes (OLEDs) employing BCzVBi as a blue fluorescent dye doped into blue host material, DPVBi with various concentration. The optimized blue OLED device having high-efficiency was constructed with structure of NPB (500 ${\AA}$) / DPVBi:BCzVBi-6% (150 ${\AA}$)/$Alq_3$(300 ${\AA}$) / Liq (20 ${\AA}$) / Al (1000 ${\AA}$). The maximum luminescence of blue OLED was 13200 cd/$m^2$ at 13.8 V and current density and maximum efficiency were 26.4 mA/$cm^2$ at 1000 cd/$m^2$ and 4.24 cd/A at 3.9 V, respectively. Luminous efficiency shows two times higher than comparing with non-doped BCzVBi blue OLED whereas $CIE_{x,y}$ coordinate was similar with bare DPVBi blue OLED such as (0.16, 0.19). Electroluminescence of BCzVBi-6% doped blue OLED has two major peaks at 445 nm and 470 nm whereas pure DPVBi's blue peak appears at 456 nm and it is happened through endothermic Forster energy transfer by molecule's vibration between LUMO of DPVBi as host material and LUMO of BCzVBi as dopant in device.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.221-228
• /
• 2013

An experimental study was carried out to investigate the effects of the injection timing on the spray and combustion characteristics in a spray-guided direct-injection spark-ignition (DISI) engine under lean stratified operation. An in-cylinder pressure analysis, exhaust emissions measurement, and visualization of the spray and combustion were employed in this study. The combustion in a stratified DISI engine was found to have both lean premixed and diffusion controlled flame combustion characteristics. The injection timing condition corresponding to the stratified mixture characteristics was verified to be a dominant factor for these flame characteristics. For the early injection timing, a non-luminous blue flame and low combustion efficiency were observed as a result of the lean homogeneous mixture formation. On the other hand, a luminous sooting flame was shown at the late injection timing because of an under-mixed mixture formation. In addition, the smoke emission and incomplete combustion products were increased at the late injection timing as a result of the increased locally rich area. On the other hand, the NOx emissions decreased and IMEP increased as the injection timing retarded. The combustion phasing produced by the injection timing was verified as the reason for this observation.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.320-324
• /
• 2011

TOPO/TOP capped CdSe nanoparticles were synthesized via thermal-solvent method. The 540 nm green and 620 nm red emitting CdSe nanoparticles were obtained by controlling the reaction time and temperature. Phosphor conversion white LED was produced combining a 460 nm emitting InGaN LED chip as an excitation source with 540 and 620 nm CdSe nanoparticles as phosphors. The single or double phosphor layer was fabricated by mixing with epoxy, and investigated the effects on the luminous properties of the white LED. The single phosphor layer white LED showed 5.78 lm/W with CIE of (0.36, 0.45) in reddish white, and the double phosphor layer white LED showed 7.28 lm/W with that of (0.32, 0.34) in pure white at 20 mA. When the 400 nm near-UV LED was applied to optical pumping source, the luminous efficiency of white LED was enhanced to 8.76 lm/W.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1383-1388
• /
• 2011

Due to many recent activities on enforcement of the intensified environmental regulation such as the policies of curbing the greenhouse gas and the Restriction of Hazardous Substances (RoHS), the usage of Light emitting diode (LED) has been rapidly increased and energy efficient management of LED light system is regarded as an important technology to enhance the energy efficiency. In this paper, we propose an energy-efficient control scheme of LED light, being composed of multiple light sources. The proposed scheme controls the intensity of LED light source to minimize the total intensity while providing the quality of lighting service. The intensity of light is assumed to be proportional to power consumption, thus the objective is to minimize the total power consumption. A linear programming problem is formulated to find the optimal intensity of each light source and procedure to apply the proposed scheme in the real system is suggested. The performance evaluation results elucidate that the proposed scheme achieves over 20% improvement in power consumption of light intensity in comparison with the conventional dimming control scheme.

• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.419-424
• /
• 2016

In this paper, we studied a light distribution for the LED chips arrangement using an optical design software. The structures of the edge type LED luminaires are reflector plane, LGP(lighting guide plane) and diffuse plane. The reflector plane is on the middle of the overall structure. We had simulation that placing LED chips on the reflector center of the reflector edge by changing the position of LED chips above the reflector center at 1mm, 2mm, and 3mm respectively. In the case, when LED chips are on the center of the reflector, it shows the light distribution of the general diffuse illumination, the semi-direct distribution with 0.56 efficiency and the direct distribution with 0.31 efficiency. And the wedge type LGP shows more efficiency than the flat type. Gradually increasing shape of semi-spherical type by 0.015mm has power of 1.02W, efficiency of 0.25, and maximum luminous intensity of 0.104W/sr, it also and shows the better optical characteristics than the reflector plane that have no patterns. This semi-spherical type shows the better optical characteristics than the reflector plane that have no patterns.