• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.181-184
• /
• 2004

The green emitting phosphor, $ZnGa_2O_4:Mn$ thin film with spinel structure were deposited by rf magnetron sputtering. Thin film phosphors were heat-treated in nitrogen, vacuum and air atmosphere, respectively. The effects of the substrates, heat-treatment conditions and the sputtering parameters were investigated. The growing behavior and luminescent properties of thin films depend on the crystallinity of the substrates. The Ga/Zn atomic ratios and luminescent characteristics were dependent on the annealing conditions.

• 전기학회논문지
• /
• 제57권1호
• /
• pp.88-91
• /
• 2008

Electroluminescent(EL) devices based on organic thin films are considered to be one of the next generation of flat-panel displays. In this paper, we have investigated electro-luminescent(EL) characteristics of organic EL device using $Alq_3$, PBD as emitting material. Current and luminance can be seen that express a similar relativity in voltage and could know that luminance is expressing current relativity.

• 한국전기전자재료학회논문지
• /
• 제20권2호
• /
• pp.178-182
• /
• 2007

Electroluminescent (EL) devices based on organic thin films are considered to be one of the next generation of flat-panel displays. In this paper, we have investigated electro-luminescent (EL) characteristics of organic EL device using $Alq_{3}$, PBD as emitting material. Current and luminance can be seen that express a similar relativity in voltage and could know that luminance is expressing current relativity.

• 한국전기전자재료학회논문지
• /
• 제26권5호
• /
• pp.391-396
• /
• 2013

Recently, microcavity is studied to reduce the optical loss of BLU and OLED. In this paper, we suggest applying microcavity to photo-luminescent lamp with plasma discharge technology to meet the display applications for a BLU for LCD. The structure of photo-luminescent lamp consists of SUS foil and ITO glass with microcavity. The opto-electric characteristics of photo-luminescent lamp with microcavity was evaluated. The brightness of photo-luminescent device was increased over $111cd/m^2$ with the adaptation of patterned microcavity at $30{\mu}m$. The 3D optical simulation verified the enhanced light outcoupling when microcavity applied to the device.

• 대한전자공학회논문지SD
• /
• 제39권8호
• /
• pp.17-23
• /
• 2002

전자빔 증착 장비를 이용하여 SrS:CuCl TFEL 소자를 제작한 후, 발광특성을 조사하였다. 형광체 모체는 SrS 분말을 사용하였고, 발광중심체로는 CuCl 분말을 0.05 ~ 0.6 at% 범위에서 첨가하였다. 증착 온도 500℃, 전자빔 전류 20 ~ 40 mA 및 증착율 5 ~ 10 /sec의 조건에서 형광층 두께를 6000 으로 증착시켰다. CuCl 농도가 낮을 때에는 monomer, dimer, trimer 및 tetramer 발광센터에 의한 청색 발광을 확인할 수 있었으나 휘도가 낮았다. CuCl 농도가 높을 때에는 dimer와 trimer 발광센터에 의한 밝은 녹청색 빛을 방출하였다. 최적의 발광특성은 CuCl 농도를 0.2 at% 첨가한 SrS:CuCl TFEL 소자에서 관찰되었으며, 문턱전압, 휘도(L/sub 40/), 효율(η/sub 20/) 및 CIE 색좌표는 각각 55 V, 728 cd/㎡, 0.49 lm/W 및 (0.21, 0.33)을 나타내었다.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.21-26
• /
• 2002

In order to search new phosphors for plasma display panel(PDP), phosphate hosts which has a host excitation band at around 150nm were prepared and their luminescent properties were investigated. In the preparation of $YPO_4: Eu\; and\; (Y,Gd)PO_4: Eu$ phosphors, the effect of oxide and oxalate starting materials on prepared phosphors were compared in terms of relative emission intensities and particle characteristics. The results showed that oxalate starting materials gave better performance in emission intensities and smaller size and more round shape phosphors which would be more applicable for high resolution display. Additionally, Gd, V, Nb and Ta ions were doped to $YPO_4:Eu$ and the luminescent properties of the resulant solid solutions were investigated to find efficient sensitizer. Among these ions, Gd, V and Nb ions increased the emission intensities of parent phosphor to around 10%. While Nb ion gave the best result in emission intensities, CIE color coordinate were improved by doping V ion into $YPO_4:Eu$ phosphor to give x=0.6523, y=0.3406 compared to commercial sample.

• 전자공학회논문지 IE
• /
• 제48권4호
• /
• pp.25-29
• /
• 2011

유기 EL소자는 제작이 쉽고 휘도가 높아 CRT와 LED 대신 평판 디스플레이 패널의 광원으로써 많이 연구되어 지고 있으며, OLED 소자중 청색 OLED는 풀컬러 적용 어플리케이션에 적용할 수 있기 때문에 이에 대한 연구가 이루어 지고 있다. 본 연구에서는, 발광 소재로 PBD, Alq3를 사용하여 유기 EL 디바이스의 전기 발광 특성을 측정하였으며, 전류와 휘도는 전압과의 관계에서 알 수 있었고 휘도와 전류의 관계를 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1703-1705
• /
• 2004

New luminescent material, 6.11-dihydoxy-5.12-naphtacene-dione $Alq_3$ complex($Alq_2$-Ncd), 1.4-dihydoxy-5.8-naphtaquinone $Alq_3$ complex ($Al_2Nq_4$) was synthesized. The $Alq_2-$ Ncd and $Al_2Nq_4$ has big molecular weight and many ${\pi}$-electrons more than widely known $Alq_3$. And extended efforts have been made to obtain high-performance electro luminescent(EL) devices. We used hole transfer layer of powdered TPD to improve hole transfer and characteristics of interface in OLED. This study indicates not only the sterical effect but also some other effects that would be responsible for the change of the emission wavelength. improvement of luminance and etc.

• 대한의용생체공학회:의공학회지
• /
• 제28권1호
• /
• pp.148-152
• /
• 2007

In this paper, we have synthesized $Gd_2O_3:Eu^{3+}$ nano phosphor particle using a low temperature solution-combustion method. We have investigated the structure and the luminescent characteristic as the sintering temperature and europium concentration. From XRD(X-ray diffraction) and SEM(scanning electron microscope) results, we have verified that the phosphor particle was fabricated a spherical shape with $30{\sim}40nm$ particle size. From the photoluminescence results, the strong peak exhibits at 611 um and the luminescent intensity depends on europium concentration. $Gd_2O_3:Eu$ fine phosphor particle has shown excellent luminescent efficiency at 5 wt% of europium concentration. The phosphors calcinated at $500^{\circ}C$ have possessed the x-ray peaks corresponding to the cubic phase of $Gd_2O_3$. As calcinations temperature increased to $700^{\circ}C$, the new monoclinic phase has identified except cubic patterns. From the luminescent decay time measurements, mean lifetimes were $2.3{\sim}2.6ms$ relatively higher than conventional bulk phosphors. These results indicate that $Gd_2O_3:Eu$ nano phosphor is possible for the operation at the low x-ray dose, therefore, the application as medical imaging detector.

• 한국의상디자인학회지
• /
• 제22권2호
• /
• pp.117-136
• /
• 2020

The purpose of this study is to analyze changes in high-tech fashion along with the types and characteristics of high-tech fashion that have appeared recently providing diverse material for the fashion field. High-tech fashion requires such research to learn how much distance one has in one's life. It is also meaningful to predict what direction high-tech fashion research may be needed. For research methods, previous research and literary studies were considered and photographs in which high-tech techniques were used were collected using the keyword 'high-tech fashion'. High-tech fashion types can be organized into the four types of luminescent types, mutual interaction types, 3D printing fashion, and virtual fashion. The research results were as follows. First, luminescent fashion was an important expression method of high-tech fashion. Materials for luminescent fashion first started with LED electric wire connections and many methods have been attempted with the appearance of electrically conductive clothing material, such as luminescent lasers and beam projectors. Second, interactive high-tech fashion often appears as variable fashion. The work of Hussein Chalayan, which was combined with advanced technology, set up a base for variable type interactive high-tech fashion in the 2000s. As bioengineering technology has developed, fashion that interacts with the environment without an energy source has appeared and the interaction among fashion, people, and the environment can be seen. Third, diverse forms of expressiveness in virtual reality such as 3D CLO shows a great difference with past high-tech fashion. Simple and diverse attempts made through virtual fittings reduce the limitations of time and space, permit interaction, and add a sense of reality through speed and dynamic physical beauty. Fourth, 3D printed fashion expresses complex and detailed clothing material that is different from those before with the development of computer 3D modeling technology. Modeling that can imitate geometric and bio-engineered structures is possible and mysterious feelings are passed on to people through creative expressions.