• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.167-170
• /
• 2003

We propose stereoscopic video coding method using the syntax of MAC(Multiple auxiliary component) that was added to the MPEC-4 visual version 2 in order to describe the transparency of the video object. We also define the novel MAC's semantics in MPEG-4 that should support the proposed coding method. The major difference between the existing coding method and the proposed coding method is the addition of the residual texture coding. The proposed coding method assigns disparity map and residual texture to 3 components of MAC: one component for disparity map and the rest 2 components fer the luminance and chrominance data of the residual texture, respectively. The performance of the proposed method is evaluated in terms of PSNR by computer simulations.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.167-171
• /
• 2011

The angular distribution of the luminance on each optical component of 40-inch light-emitting diode backlight was measured and studied, using the optical-simulation method. Several scattering functions were investigated as the reflection distribution function of the scattering dots printed on the bottom surface of the light guide plate (LGP). It was found that both the diffuse Lambertian and near-specular Gaussian scattering functions were necessary for the successful reproduction of the experimental angular distribution of the luminance. The optimization of the scattering parameters included in these scattering functions led to almost the same luminance distribution as that obtained from the experiment. This approach may be an effective way of indirectly estimating the reflection distribution function of the scattering dots of the LGP, which cannot be made accessible through any other experimental method.

• Transactions of Materials Processing
• /
• v.17 no.5
• /
• pp.322-327
• /
• 2008

LGP is a key component of LCD back light unit because it determines brightness and sharpness of the display image. Usually, it has optical patterns fabricated on the bottom surface. These optical patterns convert point or line sources placed in the side of LGP to plane source at the top surface by changing the propagating direction of the incident light. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme was adopted to find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3A
• /
• pp.276-283
• /
• 2002

This paper proposes a new color constancy algorithm using the maximum luminance surface. This method uses a linear model which represents the characteristics of human visual system. The most important process of linear model is the estimation of the spectral distributions of illumination from an input image. To estimate of the spectral distributions of illumination from an input image, we first estimate spectral distribution functions of reflected light on the brightest surface. Then, we estimate surface reflectance functions corresponding to the maximum luminance surface using a principal component analysis of the given munsell chips. We finally estimate the spectral distributions of illumination in an image. Using an estimated illumination, we recover an image by scaling it regularly for the lightness calibration. From the experimental results, the proposed method was effective in recovering the color images compared with others.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.269-272
• /
• 2008

LGP is a key component of LCD back light unit because it determines the brightness and sharpness of display image. Usually, it has optical patterns fabricated on the bottom surface. In the present paper the LiGA-reflow method was applied to fabricate the LGP mold. Furthermore, the optical simulation considering the replication ratio of pattern height was applied to the pattern design. The optical simulation through systematic correction scheme helped find the optimum distribution of pattern density. Finally, the stamper fabricated by this method was installed in the mold and LGP was produced by injection molding. As a result of luminance measurement for the final product, the average luminance and luminance uniformity was measured 3,180 nit and 84%, respectively. Consequently, the mold fabrication method using the LiGA-reflow and optical simulation(CAE) can save the expense and time compared with the existing fabrication methods(laser ablation and chemical etching).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.1
• /
• pp.40-46
• /
• 2019

To study the frequency response characteristics of alternating-current-driven organic light-emitting diodes (OLEDs), we fabricated blue-fluorescent OLEDs and analyzed their electroluminescent characteristics according to the alternating current voltage and frequency. The luminance-frequency characteristics of alternating-current-driven OLED was similar to that of a low-pass filter, and the luminance of high-voltage OLED decreased at higher frequency than low-voltage OLED. The luminance characteristics of the OLED according to the frequency is due to the capacitive reactance in the OLED, generated during the alternating current driving. The frequency response characteristics of the OLED according to the voltage is due to the decrease in internal resistance of the organic layer. In addition, the negative voltage component of the alternating current did not affect the frequency response of the OLED. Therefore, the electroluminescent characteristics of OLED with an alternating current power of 60 Hz are not influenced by the frequency.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.69-72
• /
• 2009

Recently, LED(Light Emitting Diode) TV has attracted greate attention due to its super-slim form factore as well as low power consumption. LED TV is actually an LCD(Liquid Crystal Display) TV in which edge-lit LED backlight is adopted. In the presente study, we report on the comparison of optical characteristics 55-inch edge-lit LED backlight and CCFL(Cold Cathode Fluorescent Lam)backlight. The angular distribution of the luminance and the on-axis luminance gain on each optical component were investigated and compared. The effect of the backlight structure on the performance of the optical films was studied and discussed.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1875-1878
• /
• 2003

This paper Proposes a wavelet-based video compression method to improve compressed images using modification of wavelet coefficients. In conventional wavelet-based compression methods, bigger coefficients are transmitted early according to the significance of the coefficients. In this reason, when some coefficients which have more significance but are not bigger are not transmitted, image degradation occurs. The Proposed method considered two human visual characteristics. First, human eyes are more sensitive to the change of middle frequency which represents abrupt change of brightness than that of high frequency which expresses fine region. Second, human eyes are more dull to color component than luminance respectively. By adjusting the coefficients of wavelet transformed signals and allocating more bits for compression to the luminance signal, higher compression could be achieved.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.36.4-36
• /
• 2001

A robust and reliable path recognition system is one necessary component for the autonomous navigation of a mobile robot to help determining its current position in its navigation map. This paper describes a computer visual path-recognition system using on-board video camera as vision-based driving assistance for an autonomous navigation mobile robot. The common problem for a visual system is that its reliability was often influenced by different lighting conditions. Here, two different image processing methods for the path detection were developed to reduce the effect of the luminance: one is based on the RGB color model and features of the path, another is based on the HSV color model in the absence of luminance.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.133-140
• /
• 2020

This study proposes a method of blending visible and near infrared images to enhance edge details and local contrast. The proposed method consists of radiance map generation and color compensation. The radiance map is produced by a Laplacian pyramid and a soft mixing method based on principal component analysis. The color compensation method uses the ratio between the composed radiance map and the luminance channel of a visible image to preserve the visible image chrominance. The proposed method has better edge details compared to a conventional visible and NIR image blending method.