• 전력전자학회논문지
• /
• 제5권6호
• /
• pp.601-609
• /
• 2000

유도 전동기의 직접토크 제어 방식은 전류제어 루프를 필요로 하지 않아 제어알고리즘이 간단하며 구현이 용이하나 저속운전에서 토크제어 속응성이 서하되는 단점이 있다. 따라서 본 논문에서는 유도전동기의 직접토크제어 방식을 Matlab Simulink를 이용하여 모델링하고, 서속 영역에서의 운전특성음 개선하기 위한 목적으로 확장된 Luenberger 관측기에 의한 새로운 고정자 자속관측기의 적용올 제안하였다. 또한 시뮬레이션을 통하여 고정자 저항값이 가변되는 경우플 가정하여 기촌의 개푸프 자속추정 방식에 의한 직접토크제어와 제안한 폐루프 자속관측기에 의한 직접토크 제어방식의 동특성을 비교하므로서 제안된 자속관측기를 이용한 직접토크제어 방식이 저속영역에서 보다 동특성이 우수함을 엽증하였다.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1114-1119
• /
• 2002

In this paper, the well-conditioned observer is designed to be insensitive to the ill-conditioning factors in transient and steady-state observer performance. A condition number based on 12-norm of the eigenvector matrix of the observer matrix has been proposed on a principal index in the observer performance. For the well-conditioned observer design, the non-normality measure and the observability condition of the observer matrix are utilized. The two constraints are specified into observer gain boundary region that guarantees a small condition number and a stable observer. The observer gain selected in this region guarantees a well-conditioned and observable property. In this study, this method is applied to the Luenberger observer and Kalman filters for small order systems. In designing Kalman filters, the ratio of the process noise covariance to the measurement noise covariance is a design parameter and its effect on the condition number is investigated.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.313-318
• /
• 2001

In this paper, the well-conditioned observer is designed to be insensitive to the ill-conditioning factors in transient and steady-state observer performance. A condition number based on $L_2-norm$ of the eigenvector matrix of the observer matrix has been proposed on a principal index in the observer performance. For the well-conditioned observer design, the non-normality measure and the observability condition of the observer matrix are utilized. The two constraints are specified into observer gain boundary region that guarantees a small condition number and a stable observer. The observer gain selected in this region guarantees a well-conditioned and observable property. In this study, this method is applied to the Luenberger observer and Kalman filters. In designing Kalman filters for small order systems, the ratio of the process noise covariance to the measurement noise covariance is a design parameter and its effect on the condition number is investigated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1694-1700
• /
• 2004

In this paper, we propose the AWLS/MFT (Adaptive Weighed Least Squares/ Modulation Function Technique) devised by A. E. Pearson et al. for the transfer function estimation of a modal system and investigate the performance of several algorithms, the Gram matrix method, a Luenberger Observer (LO), Least Squares (LS), and Recursive Least Squares (RLS), for the estimation of initial conditions. With the benefit of the Modulation Function Technique (MFT), we can separate the estimation problem into two phases: the transfer function parameters are estimated in the first phase, and the initial conditions are estimated in the second phase. The LO method produces excellent IC estimates in the noise free case, but the other three methods show better performance in the noisy case. Finally, we compared our result with the Prony based method. In the noisy case, the AWLS and one of the three methods - Gram matrix, LS, and RLS- show better performance in the output Signal to Error Ratio (SER) aspect than the Prony based method under the same simulation conditions.

• 전력전자학회논문지
• /
• 제9권3호
• /
• pp.231-239
• /
• 2004

A new scheme to estimate the moment of inertia in the motor drive system in very low speed is proposed in this paper. The simple estimation scheme, which is usually used in most servo system for low speed operation, is sensitive to the variation of the machine parameter, especially the moment of inertia. To estimate the motor inertia value, Reduced-Order Extended Luenberger Observer (ROELO) is applied. The effectiveness of the proposed inertia identification method using the RORLO is verified by simulation and experiment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.865-874
• /
• 2019

A controller for an underwater glider is presented. Considered underwater glider is a torpedo-shaped autonomous underwater vehicle installing adjustable buoyancy bag and movable battery in it. The controller is composed of an LQR controller to maintain zigzag vertical movement for gliding and two PD controllers to control elevator/rudder angles. The LQR controller controls the pumping speed into the buoyancy bag and the moving speed to locate the battery. One of the PD controller controls the elevator angle to assist the LQR controller, and the other controls the rudder angle to adjust the direction of the underwater glider. A reduced order Luenberger observer is adopted to estimates the center of gravity of the glider and the buoyancy mass that are essential but cannot be measured. Mathematical simulation using Matlab proved the validity of the proposed controller to obtain better performance than conventional LQR only controller under the influence of sea current.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.3-6
• /
• 2002

In a conventional speed sensorless stator flux-oriented(SFO) induction motor drive system, when the estimated speed is transformed into the sample-data model using the first-forward difference approximation, the sampled data model has a modeling error which, in turn, produces an error in the rotor speed estimation. The error included in the estimated speed is removed by the use of a low pass filter (LPF). As the result, the delay of the estimated speed occurs in transients by the use of the LPF This paper investigates the problem of a conventional speed sensorless SFO system due to the delay of estimated speed in the filed weakening region. In addition, this paper proposes a method to estimate exactly speed by using Luenberger observer, The proposed method is verified by experiment with a 5-hp induction motor drive.

• Nuclear Engineering and Technology
• /
• 제21권2호
• /
• pp.99-110
• /
• 1989

원자로 지논 농도의 최적 제어는 Linear Quadratic Regulator Problem이다. 지논 농도와 아이오다인 농도는 측정할 수 없기 때문에 최적 제어를 수행하기 위해서는 측정할 수 없는 상태 변수를 예측하는 것이 필요하다. 본 연구에서 사용된 예측방법은 Luenberger Observer를 기초로 했다. 원자로 상태 방정식은 빠른 상태 방정식(중성자 속, 핵연료 및 냉각재 온도)과 느린 상태 방정식(아이오다인, 지논)의 상호작용에 의해 Stiffness 문제가 발생되는데 이러한 시스템을 "Singularly Perturbed System"이라 한다. Stiffness문제를 해결하기 위해서 원 시스템을 느린 시스템과 빠른 시스템의 두 개의 모드로 나누는 Singular Perturbation Method를 사용한다. 예측기Observer를 이용한 원 시스템의 제어기는 느린 시스템과 빠른 시스템에 대한 분리된 예측기와 제어기의 설계에 의해 결정되어진다. 특히 원자로 상태 방정식에서는 빠른 모드는 빨리 사라지게 되므로 단지 느린 시스템에 대해서만 예측기를 설계하면 된다. 컴퓨터시뮬레이션을 통한 시험 결과는 원자로의 지논 진동은 Singular Perturbation Method와 예측기를 이용해서 거의 정확하게 효과적으로 짧은 시간내에 제어할 수 있음을 알았다.수 있음을 알았다.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.101-106
• /
• 2018

본 연구는 산업현장에서 많이 사용되는 솔레노이드의 사용함에 있어서, 정밀한 위치 제어를 위한 제어기 설계의 방법을 제안한다. 먼저 관측기는 외란을 적극 반영하여 상태추정을 할 수 있는 루엔버거 관측기를 설계하고 적절한 이득을 설정한다. 관측된 상태를 바탕으로 분수차수 PD제어기를 설계하여, 위치제어에 적용한 결과 분수차수제어기는 목표량이 다르더라도 거의 동일한 제어성능을 얻을 수 있었다. 또한, 정상상태의 위치 오차가 0.1[%]이내이고, 기동시간이 약 0.05초 이내의 정밀한 위치제어성능 가짐을 확인할 수 있었다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권10호
• /
• pp.583-590
• /
• 2003

This paper deals with speed control of DC servo motor using a high gain obserber. It was designed to estimate rotor speed of DC servo motor and it carries out speed control from the feedback of the estimated speed signal. Also, PI controller was used in speed controller. In order to verify the performance of the high gain observer which is proposed in this paper, it is compared estimate performance of Luenberger Observer and High Gain Observer with the computer simulation. Effectiveness of the proposed high gain observer is proved from the experiment to compare the case with a speed sensor to the case with high gain observer in the speed control of DC servo motor.