• Tribology and Lubricants
• /
• v.13 no.3
• /
• pp.1-9
• /
• 1997

인류가 지구상에 존재하기 이전에도 바다 속에는 오징어와 같이 자신의 힘만으로 분사 추진을 하여 움직이는 생물이 존재하였음에도 불구하고 인류는 이러한 반작용 원리를 이용한 항공용 가스터빈 엔진을 고안하는데 1900년 이상의 세월을 보내야 하였으며, 이 긴 세월 동안 많은 장치들이 고안되었다. 그러나, 실제로 이러한 원리를 사용한 현재와 같은 가스터빈 엔진의 개발은 1940년대 중반에야 가능하게 되었다. 이후 소형이면서 높은 추력을 발생시키기 위하여 많은 노력이 이루어져 왔으며, 이를 위하여 가스터빈 엔진의 주축 베어링, gearbox, seal 및 윤활 시스템 등은 더욱 큰 부담을 가질 수 밖에 없었다. 따라서, 이러한 어려움을 해결하고 보다 높은 추력을 발생시키는 가스터빈을 개발하는데 트라이볼로지의 역할이 중요하다고 할 수 있다. 가스터빈에서의 트라이볼로지의 적용 분야는 main-shift bearing, lubrication system, gearbox 및 seal등을 들 수 있으나, bearing과 lubrication을 중심으로 기술하고자 한다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1994.06b
• /
• pp.59-65
• /
• 1994

본 논문에서는 Tichy와 Connor의 와전류 마그네틱 베어링 해석을 토대로 모의실험을 하여 주요 설계변수를 찾았고 반발식 마그네틱 베어링을 실제 제작하여 실험적으로 설계변수들이 마그네틱 베어링의 부하특성에 미치는 영향을 해석함으로써 설계 필요한 자료를 정립하였고 기존의 이론적 해석을 검증하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.317-324
• /
• 1999

The present work is an attempt to calculate the steady state pressure and perturbed pressure of herringbone grooved journal bearings. A generalized coordinate system is introduced to handle the complex bearing geometry. The coordinates are fitted to the groove boundary and the Reynold's equation is transformed to be fitted to this coordinates system using the Gauss divergence theorem. This method makes it possible to deal with an arbitrary configuration of a lubricated surface. The characteristics of finite herringbone grooved journal are well calculated using this method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.244-251
• /
• 1999

Large dynamic loads act on the rotor in rotary compressors. There are unbalance forces due to eccentric rotation parts and gas forces induced by the pressure difference between compression and suction gases. Rotor-journal bearing system is nonlinear since the stiffness and damping coef-ficients of the lubrication oil film are not constant in the bearings. in this paper the program for predicting the behaviors of rotor-journal bearing system of rotary compressor is developed. Finite element modeling is used to analyze the flexible rotor. The numerical results are compared with experimental results.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.416-423
• /
• 2004

This paper presents the thermal characteristic analysis of a high-speed horizontal machining center with spindle speed of 50,000rpm and feedrate of 120m/fin. The spindle system is designed based on the built-in motor, angular contact ceramic ball bearings, oil-air lubrication and oil-jacket cooling method. The X-axis and Y-axis feeding systems are composed of the linear motors and linear motion guides, and the Z-axis feeding system is composed of the servo-motor, ball screw and linear motion guides. The thermal characteristics such as the temperature distribution, temperature rise, thermal deformation and step response, are estimated based on the finite element model of machining center and the heat generation rates of heat sources related to the machine operation conditions. Especially, the thermal time constant assessed from the step response function is introduced as an index of thermal response characteristics.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.30-37
• /
• 2004

This paper presents the thermal characteristic analysis of a high-speed horizontal machining center with spindle speed of 50,000rpm and feedrate of 120m／min. The spindle system is designed based on the built-in motor, angular contact ceramic ball bearings, oil-air lubrication and oil-jacket cooling method. The X-axis and Y-axis feeding systems are composed of the linear motors and linear motion guides, and the Z-axis feeding system is composed of the servo-motor, ball screw and linear motion guides. The thermal characteristics such as the temperature distribution, temperature rise, thermal deformation and step response, are estimated based on the finite element model of machining center and the heat generation rates of heat sources related to the machine operation conditions. Especially, the thermal time constant assessed from the step response function is introduced as an index of thermal response characteristics.

• Tribology and Lubricants
• /
• v.38 no.2
• /
• pp.70-72
• /
• 2022

In this study, we report on a power system developed as a decelerator for a driving module in an electric vehicle. The system is to be mounted in a limited space. The research focus was on development of miniaturization, light weight, and high power density. In particular, we aimed to minimize the layout of existing external components as integrated or built-in, and to maximize the power density by applying optimal cooling technology to increased requirements for developing modular power systems applicable to various OEM models. South Korean automakers ranked fourth in global electric-vehicle sales in 2020, but domestic sales are relatively slow. Despite government's expansion in subsidies for eco-friendly cars, consumers are delaying purchases after 2021 considering the cost-effectiveness of electric vehicles. In major European markets, the demand for electric vehicles exceeded the demand for diesel cars, and sales of hybrid cars, which used to represent eco-friendly cars, are slowing down as Toyota, started selling electric vehicles. In this study, the internal lubrication characteristics of a decelerator installed in an electric vehicle were analyzed in terms of the deceleration time while driving. By selecting the proper oil and oil viscosity, it was confirmed that there is no problem in lubricating the bearings and gears of the decelerator.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.26-36
• /
• 2012

Minimizing the cylinder wear and the consumption rate of cylinder oil in a large two-stroke diesel engine is of great economic importance. A motor-driven cylinder lubricator for Sulzer RT-flex large two-stroke diesel engines developed by authors is in need of mounting a quill system to lubricate cylinder parts for a smooth operation. In order to apply the common-rail lubricating system to the developed cylinder lubricator as the second research stage, the mechanical quill system with a progressively quantitative distributor (M.D.S.) is improved in the electronically controlled quill system with an accumulating distributor (E.D.S.). In this study, the effects of lubricator motor speed, plunger stroke and cylinder back pressure on oil feed rate and inequality rate are experimentally investigated by applying E.D.S. to the developed cylinder lubricator. It is found that the oil feed rate of E.D.S. is higher than that of M.D.S. because of the increase of delivery speed and volume by changing the role of accumulator in the same experimental condition. It can be also shown that, in E.D.S., the inequality rate is decreased a little or hardly unchanged as the cylinder back pressure and plunger stroke is elevated, while the inequality rate increased in M.D.S.. The inequality rates of E.D.S. and M.D.S. are lowered as the lubricator motor speed is increased.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1993.12a
• /
• pp.70-76
• /
• 1993

From the analysis of shaft-bearing indeterminate system, moment and misalingment angle which was generated in bearing were determined. And the influence of span length between bearings on the fatigue life was established. The equation to estimate the cage rotational speed was proposed, and this equation was verified by the measuring of cage speed and shaft speed. And accoding to quasi-static analysis, the spinning speed of ball was determined.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1039-1041
• /
• 2003

There are many advantages of the Magnetic Bearing system, compared with conventional contacting bearing systems. Since the spindle in the Magnetic Bearing system is levitated by electro-magnetic forces and rotates without mechanical friction, it can run without lubrication. So, it can run in the extreme circumstances, e.g. a vacuum condition in the space.