• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.762-770
• /
• 2008

The purpose of this study was to examine of the flower patterned fabrics used for the Shrouds during 15~18th century in Chosun Dynasty. The Shrouds at that time could be classified by the garments for the dead(殮襲衣) and the utensils used in religious services(殮襲諸具). And we looked into the types and the compounding methods of the flower pattern used for the utensils used in religious services(殮襲諸具) as well as the Shrouds accounting to the uses. Results of this study are as follows. 1) The flower patterned fabrics weaved as the uses of the garments for the dead(殮襲衣), item by item, were divided into the upper garment, the lower garment and men's Po(coat). 2) Seeing Jeogori, mixed various flower patterned fabrics, among the upper garment, there were focused on the various good meanings such as longevity, integrity and prosperity etc. 3) The flower patterns in men's Po(coat) were used a lot in Jangui and Dahnryoung. Cheollik, Dappo, Jeonbok, etc made of the flower patterned fabrics, were of small number but we can feel an aesthetic sense of men at that time. 4) The flower patterned fabrics weaved the lower garments, were used much more in the skirts than in the trousers, for reasons of the wrapping a dead body. 5) Seeing the flower pattern used the utensils used in religious services(殮襲諸具), the pattern of Lotus and Arabesque, among the types of flower pattern, had a majority.

• The Korean Journal of Community Living Science
• /
• v.25 no.4
• /
• pp.549-556
• /
• 2014

This study evaluates the thermal insulation and evaporative resistance of a waterproof and breathable garment system and determines the factors influencing its thermal performance. The experimental garments were composed of underwear (shirts with 100% wool and 100% polyester) and outerwear (jackets and pants with a vapor-permeable membrane and a vapor-impermeable membrane). Data on clothing insulation in a dry condition ($10^{\circ}C$) and a wet condition ($10^{\circ}C$, 40% R.H.), evaporative resistance ($34^{\circ}C$, 40% R.H., and $10^{\circ}C$, 40% R.H.), and microclimate vapor pressure were collected and analyzed. According to the results, the thermal insulation of the experimental garment system ranged 1.27~1.40 in the dry condition and 0.40~0.89 in the wet condition at $10^{\circ}C$. Evaporative resistance ranged $41{\sim}525m^2Pa/W$. A decrease in thermal insulation by wetting underwear ranged 31~67% in the cold condition ($10^{\circ}C$). The breathability of the outer garment influenced the decrease in thermal insulation by wetting. The type of underwear fiber influenced the decrease in thermal insulation only when it was used with breathable outerwear. The vapor-permeable outerwear sample with polyester underwear (P_Perm) showed a larger decrease in insulation than that with wool (W_Perm). The evaporative resistance of the vapor-permeable ensemble showed no effect of underwear in the warm condition ($34^{\circ}C$), but polyester underwear showed lower evaporative resistance than wool in the cold condition ($10^{\circ}C$). The vapor-impermeable ensemble showed no difference in evaporative resistance between polyester underwear and wool underwear in both conditions. Future research should consider various clothing ensemble combinations and environmental conditions and evaluate wear comfort by using human subjects.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.795-803
• /
• 2017

This research aimed to figure out the effects of physical features such as BMI, garment size and socio-psychological factors such as self-esteem and depression on the body management. A survey was conducted for women in their 40's and 50's. The participants in this study consisted of 197 women recruited in Daegu and the surrounding areas. Statistical analysis including factor analysis, ANOVA, cluster analysis and regression was done using SPSS 23.0 to analyze the results. Among 3 clusters divided by BMI, normal group showed higher body cathexis compared with overweight group and obesity group. S-size group showed higher body cathexis rather than M, L-size groups. L-size group showed higher scores in nonsurgical body management factor. Self-esteem(+)/depression(-) group showed highest body cathexis among 4 groups clustered by self-esteem and depression levels. On the other hand, self-esteem(-)/depression(+) group showed the lowest body cathexis and highest surgical body management and nonsurgical body management factors. This result meant that the lower in self-esteem and the higher in depression, body cathexis decreased and desire for body management increased. As the results of analysis of the effects of BMI, garment size, self-esteem, depression level on body management, depression was a significant factor on surgical body management; depression and garment size were critical factors on nonsurgical body management.

• Journal of the Korean Society of Costume
• /
• v.63 no.3
• /
• pp.95-109
• /
• 2013

This thesis was conducted with the purpose of proposing a systematic and comprehensive system for women's upper garment sizes so that the satisfaction level of women purchasing the upper garment products in Internet shopping malls is enhanced. To achieve this, this study first conducted a survey of women from the ages of 18 to 39 and attempted to discover consumer satisfaction levels and preferences of the clothing product sizing system of Internet shopping malls. While keeping track of the global distribution environment, an optimal clothing sizing system for Korean women that fit recent changes in their body shapes was proposed. The results of this study are as follows. First, A result of studying the satisfaction levels and preferences of consumer's purchase experience and the sizing system showed that 48.6% of the total respondents were dissatisfied with the current sizing system. Second, based on the research of the size classification system of domestic and foreign upper garment for women, unlike domestic Internet shopping malls, overseas generally offer several size classifications. Third, results of studies 1 and 2 was used to propose an optimal clothing products sizing system method. Also, the body and product sizes and the measurement methods should be offered together. In summary of all these results, by establishing globally compatible sizing system, consumers are able to recognize their sizes on their own and by doing this, it will lower perceived risk of the consumers at the time of a Internet shopping mall purchase, and this will raise their level of satisfaction while making purchases.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.963-970
• /
• 2013

The purpose of this study was to develop torso pattern of underweight female in their 20s~30s by using Clo 3D virtual garment simulation system. The results were as follows; first, as a result of analyzing torso somatotype, underweight women showed lower average than average values of whole women in their twenties and thirties in the items such as length, width, circumference, thickness except for height. Second, by using 3D virtual garment simulation, new torso pattern considered underweight female was development. The basic numerical formula were as follows ; bust girth B/2+3.5, armhole depth B/4+0.5, front waist girth W/4+0.5+0.7, back waist girth W/4+0.5-0.7, front hip girth H/4+1+0.5, back hip girth H/4+1-0.5, chest width B/6+3.1, back width B/6+4.5, neck width B/12+0.2 and neck depth B/12+1.7. Third, by reducing hollowed amount of front, back, and side line, and hollowed amount of back center line, the reduced quantity was included to darts amount. Number of dart was adjusted to two pieces so that darts amount was equally distributed to two darts. Forth, according to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern was appropriate for the underweight women. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• Korean Journal of Human Ecology
• /
• v.24 no.1
• /
• pp.97-109
• /
• 2015

Recently, because the market for compression wear now includes all consumers, not just professionals, various items for recovery after exercising or for enhanced effects from exercise have been introduced. In this research, a systematic and stepwise design process was proposed to develop compression garment that has both functional area and appropriate pressure to protect the knee when exercising. The U-V format functional area that wraps underneath the knee was selected by considering the shape and change in the skin length when bending the knee. After the selection of the functional area, a total of seven knee design areas, including the existing product, were designed to determine the appropriate pressure. After various movements, the compression garment was ranked in terms of support of the knee, level of pressure, discomfort of seam line, and comfort of popliteal; the preferred design was selected using the quad method. Four compression wear garments were produced using two selected preferred designs; the wear evaluation was performed using a seven-point Likert scale. As a result, the optimal reduction rate of the pattern was calculated based on Ziegert and Keil's method. The applied percentage of the fabric stretch at the upper part of the crotch was 66% for the width and 50% for the length; for the lower part of the crotch, only 66% for the width was applied. Moreover, it was determined that the design of the U-V knee protection part was preferred when a 7 mm square was placed at a 1 mm distance because this not only supports the knee but also allows the fabric to accommodate various skin deformations.

• Proceedings of the Korean DIstribution Association Conference
• /
• 1999.11a
• /
• pp.161-177
• /
• 1999

Marketing channels have been characterized as social systems by the recent channel literatures. Under this assumption, many channel behavioral theories were developed by examining hypothetical relationships among several channel variables. Among them, interrelationship of channel cooperation with other variables has been one of major concerns to channel managers. From this point of view, the objective of this paper is to examine the role of cooperation in the franchise system of garments goods. In order to achieve our goal, data was collected from garment retailers and a simple random sample of 150 dealers was drawn and tested. Major findings through the data analysis are as follows : 1. Higher levels of dependence lead to higher levels of cooperation. 2. Noncoercive sources of power tends to increase intrachannel cooperation. However, the hypothesis that higher levels of coercive sources of power will lead to lower levels of cooperation was not statistically supported. 3. Another hypothesis that higher levels of conflict will lead to lower levels of cooperation was partially supported. 4. Higher levels of cooperation lead to higher levels of cooperation. In this study, data was gathered from the retail side of the franchise channel dyad for garments goods. Therefore, future research are suggested to investigate respondents of both sides(franchiser and franchisee) of the channel dyad.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.5
• /
• pp.723-740
• /
• 2022

This study aimed to develop an Arduino-based garment pressure device (APD) on the basis of using Single-Tact sensor by suggesting the reliable clothing pressure range and coefficient of selected sensors through the APD calibration process. Once the APD was validated, the pressure of the experimental men's lower body compression wears was measured using the APD and was compared to the pressure measured using the existing air-pack type pressure meter. The subjects were one mannequin and eight men in their 20's, and the trial compression wears were calf sleeves and pants. Clothing pressures were measured in hip, mid-thigh, calf, and ankle. In terms of the 99% confidence level, the experimental clothing pressure measured at the designated measuring points using the APD was considered identical to the one measured using an existing clothing pressure meter. Therefore, on the basis of the experiment results, this study demonstrated that the APD is as reliable as the existing clothing pressure meter within the pressure ranges of 0.54-16.79 kPa and 0.18-25.47 kPa as provided by the SingleTact sensor supplier's data on the basis of using an external ADC (Analog to Digital Converter) module.

• The Research Journal of the Costume Culture
• /
• v.31 no.5
• /
• pp.627-639
• /
• 2023

This study seeks to increase the satisfaction of elderly men when purchasing and wearing ready-to-wear clothes by designing a slacks pattern suitable for their body type, which is determined by analyzing their lower bodies using virtual avatars and 3D virtual simulation system. The study found the following. First, based on virtual visualization of the comparison slacks pattern, the waistline position was consistently the lowest scored question among the evaluation survey items. Interpretation of this dissatisfaction suggests that, because the front waistline falls below the abdomen, the lower body, and especially the abdominal shape, is unpleasantly emphasized. Second, by using a virtual simulation system, the study developed a new slacks pattern that considered the concerns of elderly men. The primary measurement changes were as follows: front waist girth W/4+1.5cm+0.5cm, back waist girth W/4+1.5cm-0.5cm, front hip girth H/4+2.5cm-0.5cm, back hip girth H/4+2.5cm+0.5cm. Third, the new slacks pattern's appearance was evaluated more highly than the comparison pattern, confirming the new pattern's appropriateness for elderly men. This study demonstrates how slacks and other clothing patterns designed in a 3D virtual garment simulator can be used to design more appealing clothing for elderly men, increasing the satisfaction of wearing ready-made clothes at older ages.

• Korean Journal of Human Ecology
• /
• v.8 no.1
• /
• pp.211-217
• /
• 1999

To investigate the fitting and its problems related in clothing fit and to get basic data to develop fitted ready-to-wear garment, total 238 subjects were surveyed during the period of May, 1997 in Taejon. The major results were as follows; 1. The results showed that most subjects had purchased ready-to-wear garments in a department store. 2. The fit of ready-to-wear garments is more suitable in the upper wear such as T-shirts and blouse than in lower wear such as skirts and pants. 3. Fitting problems in ready-to-wear garments were identified, including sleeve length, shoulder area. 4. A variety of fitting problems in ready-to-wear garments were showed waistline, thigh girth, sleeve length. 5. There were significant differences between the demographic variables, i.e. marital status and occupation and clothing problems.