• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.315-324
• /
• 2012

The purpose of current study was to investigate the effects of the heights on the lower extremities, torso and neck segments for energy dissipation during single-leg drop landing from different heights. Twenty eight young healthy male subjects(age: $23.21{\pm}1.66yr$, height: $176.03{\pm}4.22cm$, weight: $68.93{\pm}5.36kg$) were participated in this study. The subjects performed the single-leg drop landing from the various height(30, 45 & 60 cm). Force plates and motion-capture system were used to capture ground reaction force and kinematics data, respectively. The results were as follows. First, the ROM at the ankle, knee, hip and trunk was increased with the increased heights but the ROM at the neck was increased in the 60cm. Second, the angular velocity, moment and eccentric work at the ankle, knee, hip, trunk, and neck was increased with the increased heights. Third, the contribution to total work at the knee joint was not significantly different, while the ankle joint rate was decreased and hip and neck rate was increased in the 60cm, and trunk rate was increased with the increased heights. Lastly, the increase in landing height was able to augment the level of energy dissipation not only at the lower extremities but also at the trunk and neck. The findings showed that drop landing affect trunk and neck with lower extremity joints. Therefore, we need to consider that trunk and neck strengthening including stability should be added to reduce sports injury during prevention training.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.1
• /
• pp.1-15
• /
• 2021

Objective: The aim of this study was to investigate 1) the difference in static lower extremity alignment (SLEA) according to a history of lateral ankle sprain (LAS), 2) to identify SLEA factors affecting LAS, and 3) to present the cut-off value and 4) the usefulness and limitations of the SLEA measurement. Method: This case-control study recruited 88 men (age: 27.78±4.69 yrs) and 39 women (age: 24.62±4.20 yrs) subjects with and without LAS. SLEA measurement protocol included Q angle, tibiofemoral angle, genu recurvatum, rear foot (RF) angle, tibal varum and torsion, navicular drop, ankle dorsiflexion range of motion (DF ROM). Independent t-test, logistic regression and receiver operating characteristic (ROC) curve were used for statistical analysis. Results: Men with a history of LAS had significantly smaller Q angles both in standing and in supine position, while women with a history of LAS had significantly greater DF ROM in non-weight bearing (NWB; p < 0.05). Logistic regression model suggests tibial varum (OR = 0.779, p = 0.021) and WB DF ROM (OR = 1.067, p = 0.045) were associated with LAS in men. In case of women, there were no significant SLEA factors for LAS, however, ROC curve analysis revealed standing RF angle (AUC = 0.647, p = 0.028) and NWB DF ROM (AUC = 0.648, p = 0.026) could be affecting factors for LAS. Conclusion: There are differences in SLEA according to the history of LAS, furthermore, the identified items were different by sex. In case of men, tibial varum and WB DF ROM affect LAS occurrence. Standing RF angle and NWB DF ROM of women could be a predictor for LAS. However, since the sensitivity and specificity in most of the SLEA measurements are low, kinematic in dynamic tasks should be considered together for a more accurate evaluation of LAS risk.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.509-515
• /
• 2020

The purpose of this study was to analyze the correlation between passive ankle movement range and knee joint kinetic variables during squat movement. In this study, a total of 27 subjects participated in this study, 19 men and 8 women, who had no history of the musculoskeletal system of the lower extremity. To verify the correlation between the ankle joint flexibility and the knee joint kinetic variables during deep squat, it was performed pearson's correlation coefficient and variables showing statistically significant correlation were performed by simple regression analysis at a significant level of α .05. Through this study, the relationship between the peak joint moment and joint reaction force factors that determine ankle joint flexibility and knee joint pressure was confirmed. Therefore, when applying an exercise that can generate a lot of load on the knee joint such as deep squats during strength training, checking the degree of flexibility of the ankle joint among physical characteristics to the individual may reduce the stability of the body and the risk of injury to the knee joint. It is expected to be helpful in setting the intensity of exercise that can be done.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.457-466
• /
• 2009

This study puts the purpose in providing the scientific basis of dance motion as an artistic expression by analyzing the kinematic variable and the distribution factor of power affecting the motion, which is connected to the turn, right after the arabesque motion according to the existence and non existence of using the arm in the arabesque motion of modern dance. As a result of this study, arabesque turn motion, not using the upper limbs, used more turning force of head and body than the arabesque turn motion, using the upper limbs, and arabesque turn using the upper limbs obtained the turning force, using the right shoulder. The range of the hip joint on the left and the position change of left tiptoe in the Arabesque turn motion using the upper limbs is largely ascended to the vertical axis, while, the position of tiptoe in the Arabesque turn motion, not using the upper limbs is dropped to the lower part of each event. In the replacement of body center, Arabesque turn motion using the upper limbs is moved more to the turning axis than arabesque turn motion not using the upper limbs. As a result of maximum vertical ground reaction force, Arabesque turn motion using the upper limbs appeared to be a lower value than the Arabesque turn motion not using the upper limbs.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.153-160
• /
• 2017

Gait analysis has been conducted in various environments, but the biomechanics during the transition from uphill walking to downhill walking have not been reported. The purpose of this study is to investigate the knee and ankle joint kinematics and kinetics during walking on a triangle-shaped slope compared with those during level walking. Kinematic and kinetic data of eighteen participants were obtained using a force plate and motion capture system. The greater peak ankle dorsiflexion angle and moment and the peak knee extension moment were observed (p<0.05) during both uphill and downhill walking on the triangle-shaped slope. In summary, uphill walking on a triangle-shaped slope, which showed a peak knee flexion of more than $50^{\circ}$ with greater peak knee extension moment, could increase the risk of patellofemoral pain syndrome. Downhill walking on a triangle-shaped slope, which involved greater ankle dorsiflexion excursion and peak ankle dorsiflexion, could cause gastrocnemius muscle strain and Achilles tendon overuse injury.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1345-1350
• /
• 2010

Sit-to-stand movement is a basic movement in daily activities. On the basis of this movement, the biomechanical functions of a person can be evaluated. The study of the joint kinematics, moment, and muscle coordination is necessary to understand the characteristics of the sit-to-stand movement. We have developed a motion-based program for inverse dynamics analysis and the electromyogram-based program for muscle force prediction. The joint kinematics and the kinetic results estimated on the basis of obtained motion data, ground reaction force, and electromyogram signals were compared with those reported in previous studies, and the muscle forces determined by the two methods were compared with each other. The methods and programs developed in this study can be used to understand biomechanics and muscle coordination involved in basic movements in daily activities.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.373-380
• /
• 2015

This study which was conducted on male tennis player on one hand(OH) & two hand(TH) backhand stroke and how both motion differed on low extremity movement with each feature analyzed in detail, the result as follow. The motion of TH based on resultant velocity, appeared to be a higher than OH, which was important variable in determining the ball speed. Contrary to TH where the player minimized the motion in the lower body and finalized a stroke through the turn of the trunk as if sticking the ball closed to the body, OH was carried out such that the player appeared to chase the ball. Whereas in OH, the knee joint extension moment was not found to be larger than TH, the opposite result came out for abduction moment and internal rotation moment. In the case of hip joint, consisted of extension, abduction and internal rotation moment, the outcome emerged to be greater for TH with conspicuous difference in abduction moment. Flection moment for TH overwhelmed in TH though both adduction and external rotation moment brought about similar outcome for both strokes.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.1
• /
• pp.85-90
• /
• 2013

Efficient gait is compensate for a lack of exercise, but the wrong walking can cause disease that joints, muscles, brain and body structure(Scott & Winter, 1990). Also many researchers has been studied gait of positive mechanism using analytical methods kinetic, kinematic. This study is to identify nature of knee adduction moment, depending on different foot progression angle and the movement of rotation of pelvis and body. Health study subject conducted intended walking with three different angles. The subjects of this study classified three types of walking; walk erect, pigeon-toed walk and an out-toed gait. Ten university students of K without previous operation and disease record selected for this study. For accuracy of this study, three types of walking carried out five times with 3D image analysis and using analysis of ground reaction force to analyze nature of knee adduction moment and the movement of rotation of pelvis and body. Firstly, the HC(heel contact) section value of intended walk erect, pigeon-toed walk and an out-toed gait was not shown statistically significant difference but TO(toe off) section value was shown that the pigeon-toed walk statistically significant. The value of pigeon-toed walk was smallest knee adduction moment(p< 0.005). Secondly, X axis was the change of rotation movement body and pelvis when walk erect, pigeon-toed walk and an out-toed gait. Shown statistically Y axis was not shown statistically significant but Z axis statistically significant(p<0.05). These result show the significant differences on TO section when walking moment reaches HC, it decides the walking types and rotates the foot.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.113-121
• /
• 2007

The purpose of this study was to determine the effect of three different plates($0^{\circ}$, $10^{\circ$}, $20^{\circ}$)under heels on the lower limb muscles and erector spinae during squat exercise. Ten high school korean traditional wrestling players(age: $18.5{\pm}0.7$, weight: $1972.2{\pm}128.5N$, height: $177.8{\pm}6.0cm$, weight of barbell: $1004.5{\pm}132.4N$) performed squat exercise using three different tilting plates under heels at a cadence of 40beats/sec with 80% one repetition maximum load. Surface electrodes were placed on the participants' left and right erector spinae, and rectus femoris, vastus medialis, vastus lateralis, tibialis anterior, biceps femoris, medial gastrocnemius, and lateral gastrocnemius in the right lower extremity. One S-VHS camcorder(Panasonic AG456, 60fields/s) was placed 10m to the side of the participant. To synchronize the video and EMG data, a synchronization unit was used for this study. Average and Peak IEMG values were determined for each participant. For each variable, a one-way analysis of variance was used to determine whether there were significant differences among three different tilting plates under heels. When a significant difference was found in plates type, post hoc analyses were performed using the Tukey procedure. A confidence level of p<.05 was used to determine statistical significance. As a result of this study, maximum nEMG values of the tibialis anterior in $0^{\circ}$ plates was significantly higher than the corresponding values for the other plates during the knee extension. This increased activation in the tibialis anterior muscle indicates an increase in displacement of center of gravity of body. It is very likely that additional muscle activation are needed to stop the forward and backward movement. The results also showed that muscular activities of quadriceps femoris and erector spinae were decreased with increasing angle of plates. This suggests that increasing angle of plate may help to sustain the balance and posture of squat exercise. It is considered that very few significant differences were found among three different plates($0^{\circ}$, $10^{\circ}$, $20^{\circ}$) since elite players with much experience in squat exercise, were chosen as a participant of this study. In order to obtain meaningful results regarding the tilting angle of heel plates in squat exercise, kinetic and 3D kinematic analysis will be needed in the future study.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.4
• /
• pp.308-313
• /
• 2021

Objective: The purpose of this study was to investigate the effect of different kettlebell mass (30%, 40%, and 50% of the body mass) on kinematics and kinetic variables of kettlebell swing. Method: Total of 16 healthy male who had at least 1 year of kettlebell training experience were participated in this study (age: 31.69 ± 3.46 yrd., height: 173.38 ± 4.84 cm, body mass: 74.53 ± 6.45 kg). In this study, a 13-segments whole-body model (upper trunk, lower trunk, pelvis, both side of forearm, upperarm, thigh, and shank) was used and 26 reflective markers were attached to the body to identify the segments during the movement. A 3-dimensional motion analysis with 8 infrared cameras and 4 channeled EMG was performed to find the effect of kettlebell mass on its swing. To verify the kettlebell mass effect, a one-way ANOVA with a repeated measure was used and the statistical significance level was set at 𝛼=.05. Results: Firstly, in all lower extremity joints and thoracic vertebrae, a statistically significant change in angle was shown according to an increase in kettlebell mass during kettlebell swing (p<.05). Secondly, in both the up-swing and down-swing phases, the knee joint and ankle joint ROM showed a statistically significant increase as the kettlebell mass increased (p<.05) but no statistically significant difference was found in the hip joint and thoracic spine (p>.05). Lastly, the hamstrings muscle activity was statistically significantly increased as the kettlebell mass increased during up-swing phases (p<.05). Also, as the kettlebell mass increased in P4 of the down swing phase, the gluteus maximus showed a statistically significantly increased muscle activation, whereas the rectus femoris showed a statistically significantly decreased muscle activation (p <.05). Conclusion: As a result of this study, hip extension decreased and knee extension increased at 40% and 50% of body mass, and the spine also failed to maintain neutrality and increased flexion. Also, when kettlebell swings are performed with 50% of body mass, synergistic muscle dominance appears over 30% and 40% of body mass, which is judged to have a risk of potential injury. Therefore, it is thought that for beginners who start kettlebell exercise, swing practice should be performed with 30% of body mass. In addition, even in the case of experienced seniors, as the weight increases, the potential injury risk may increase, so it is thought that caution should be exercised when performing swings with 40% and 50% of body mass. In conclusion, it is thought that increasing the weight after sufficiently training with 30% of the weight of all subjects performing kettlebell swing is a way to maximize the exercise effect as well as prevent injury.