• Journal of Nutrition and Health
• /
• 제9권2호
• /
• pp.24-39
• /
• 1976

The present study was undertaken to investigate the metabolic problems of high carbohydrate and cellulose diets of Korean. Forty males and same number of females of Albino rats, aged $45{\pm}5$days were divided into 95% high carbohydrate (H. CHO)group, 83.8% medium carbohydrate (M. CHO)group, 50% low carbohydrate (L. CHO) group and standard (Stand). group containing 72.2% sugar. Each group was divided into two again-1.55% cellulose group and non-cellulose group, 10 rats each of eight groups in both sexes. Cellulose was added to each of non-cellulose diets in the forms of spinach powder and rice bran. After 14 weeks the rats were sacrificed for chemical analysis and the results were elucidated as follows. (1) H. CHO+Cell. group showed the lowest value in body weight gained and shrinkage of almost all organs, in contrast with this group the L.CHO group showed higher body weight gained than Stand. group. M. CHO+Cell, group showed much the same body weight gained curve as Stand. group. (2) It was observed that cellulose group showed lower F.E.R and P.E.R value than non-cellulose group comparatively. (3) Total nitrogen retention and retention rate were decreaced in H. CHP groups compared with M. CHO or L. CHO groups. (4) The amount of feces was increased due to addition of cellulose to experimental diets and in accordance with the increasing total fecal excretion of nitrogen and glucose was also increased, especially noticeable in fecal glucose excretion. (5) It was noteworthy that serum cholesterol level was decreased due to addition of cellulose in H. CHO group and L. CHO group. (6) M. CHO+Cell. group was designed to reflect the average survey data of Korean diets and there was no significant differences on body weight gained, F.E.R, P.E.R, total nitrogen retention and hematology between M. CHO+Cell. and Stand. group. Total glucose excretion was increased due to dietary cellulose in M. CHO+Cell. group, but it seemed to be no metabolic problems in this group.

• 폴리머
• /
• 제24권6호
• /
• pp.845-853
• /
• 2000

DSC와 TGA 분석으로 탄소섬유/페놀수지 복합재의 최적 경화조건과, 탄화조건을 선정하고 핫프레스 몰딩 방법으로 복합재를 제조한 후 140$0^{\circ}C$까지 탄화하였다 또한 층간전단강도의 개선에 효과적이라 생각되는 흑연분말, 카본블랙, 분쇄된 탄소섬유 및 탄소섬유 매트를 첨가하여 이러한 첨가제가 밀도 및 기공도에 미치는 영향과 ILSS, 굽힘강도와 같은 기계적 물성과의 상관관계에 대하여 연구하였다. 흑연분말을 약 9 vol% 첨가한 경우 가장 큰 ILSS 값과 굽힘강도 값을 나타내었고 카본블랙의 경우, 약 3 vol%에서 ILSS 값이 약간 증가하였으나 굽힘강도는 감소하였다. 분쇄된 탄소섬유와 탄소섬유 매트 첨가시 수지부족과 열수축에 의한 층간분리가 발생하여 밀도와 ILSS 및 굽힘강도를 감소시키는 결과를 나타내었다.

• 한국표면공학회지
• /
• 제28권4호
• /
• pp.207-218
• /
• 1995

Tungsten(W) metal has excellent properties in heat-resistance, corrison-resistance and impact-resistance but W-Metal is hard to sinter because higher than $2,000^{\circ}C$ is required to sinter W-powder. Con-sequently, a deposit technique of Nikel Phosphorus(NiP) on W-powber by the liquid reduction precipitation method was performed. Sintering temperature of the resulting W-NiP composite was lowered around to $1,000^{\circ}C$, and the mechanical properties of the sintered body was studied. The most suitable conditions for NiP thin film deposit on W-Powder by the liquid reduction precipitation method, which are composition, concentration, pH and temperature of the liquid reduction solution, were considered. The activated sintering was carried out in a reducing condition furnace. Components and properties of the sintered body were investigated by the density and the hardness measurements, X- ray diffraction analysis, and microscopic photographs of the surface. Quantity of NiP thin film on W-powder could be varied by the change of the liquid reduction solution composition. The sintering temperature of W-NiP composite powder is lowered to $950^{\circ}C$ from $2,000^{\circ}C$ and the hardness is increased (ca. 720 Hv). Large shrinkage could be observed since density was increased from 5.5 to 11.0 g/$cm^2$ which 86.2% of theoretical density. W metal and $Ni_3P$ crystal were detected through X-ray diffraction on the sintered body. Perfectly activated sintering was observed by microscopic photographs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권4호
• /
• pp.564-568
• /
• 2004

Restructuring had made it possible to utilize lower value cuts and meat trimmings from spent animals by providing convenience in product preparation besides enhancing tenderness, palatability and value. Milk co-precipitates (MCP) have been reported to improve the nutritional and functional properties of certain meat products. This study was undertaken to evaluate the influence of incorporation of milk co-precipitates at four different levels viz. 0, 10, 15 and 20% on the quality of restructured buffalo meat blocks. Low-calcium milk co-precipitates were prepared from skim milk by heat and salt coagulation of milk proteins. Meat chunks were mixed with the curing ingredients and chilled water in a Hobart mixer for 5 minutes, followed by addition of milk co-precipitates along with condiments and spice mix and again mixed for 5 minutes. Treated chunks were stuffed in aluminium moulds and cooked in steam without pressure for 1.5 h. After cooking, treated meat blocks were compared for different physico-chemical and sensory attributes. Meat blocks incorporated with 10% MCP were significantly better (p<0.05) than those incorporated with 0, 15 and 20% MCP in cooking yield, percent shrinkage and moisture retention. Sensory scores were also marginally higher for meat blocks incorporated with 10% MCP than product incorporated with 15 and 20% MCP, besides being significantly higher than control. On the basis of above results 10% MCP was considered optimum for the preparation of restructured buffalo meat blocks. Instrumental texture profile analysis revealed that meat blocks incorporated with 10% MCP were significantly better (p<0.05) in hardness/ firmness than control although, no significant (p>0.05) differences were observed in cohesiveness, springiness, gumminess and chewiness of both type of samples.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.124-124
• /
• 2011

This study investigated the interaction of varied plasma power with ultralow-k toluene-tetraethoxysilane (TEOS) hybrid plasma polymer thin films, as well as changing electrical and mechanical properties. The hybrid thin films were deposited on silicon(100) substrates by plasma enhanced chemical vapor deposition (PECVD) system. Toluene and tetraethoxysilane were utilized as organic and inorganic precursors. In order to compare the electrical and the mechanical properties, we grew the hybrid thin films under various conditions such as rf power of plasma, bubbling ratio of TEOS to toluene, and post annealing temperature. The hybrid plasma polymer thin films were characterized by Fourier transform infrared (FT-IR) spectroscopy, atomic force microscopy (AFM), nanoindenter, I-V curves, and capacitance. Also, the hybrid thin films were analyzed by using ellipsometry. The refractive indices varied with the RF power, the bubbling ratio of TEOS to toluene, and the annealing temperature. To analyze their trends of electrical and mechanical properties, the thin films were grown under conditions of various rf powers. The IR spectra showed them to have completely different chemical functionalities from the liquid toluene and TEOS precursors. Also, The SiO peak intensity increased with increasing TEOS bubbling ratio, and the -OH and the CO peak intensities decreased with increasing annealing temperature. The AFM images showed changing of surface roughness that depended on different deposition rf powers. An nanoindenter was used to measure the hardness and Young' modulus and showed that both these values increased as the deposition RF power increased; these values also changed with the bubbling ratio of TEOS to toluene and with the annealing temperature. From the field emission scanning electron microscopy (FE-SEM) results, the thickness of the thin films was determined before and after the annealing, with the thickness shrinkage (%) being measured by using SEM cross-sectional images.

• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.155-163
• /
• 2014

Objectives: Light-curing of resin-based materials (RBMs) increases the pulp chamber temperature, with detrimental effects on the vital pulp. This in vitro study compared the temperature rise under demineralized human tooth dentin during light-curing and the degrees of conversion (DCs) of three different RBMs using quartz tungsten halogen (QTH) and light-emitting diode (LED) units (LCUs). Materials and Methods: Demineralized and non-demineralized dentin disks were prepared from 120 extracted human mandibular molars. The temperature rise under the dentin disks (n = 12) during the light-curing of three RBMs, i.e. an Ormocer-based composite resin (Ceram. X, Dentsply DeTrey), a low-shrinkage silorane-based composite (Filtek P90, 3M ESPE), and a giomer (Beautifil II, Shofu GmbH), was measured with a K-type thermocouple wire. The DCs of the materials were investigated using Fourier transform infrared spectroscopy. Results: The temperature rise under the demineralized dentin disks was higher than that under the non-demineralized dentin disks during the polymerization of all restorative materials (p < 0.05). Filtek P90 induced higher temperature rise during polymerization than Ceram.X and Beautifil II under demineralized dentin (p < 0.05). The temperature rise under demineralized dentin during Filtek P90 polymerization exceeded the threshold value ($5.5^{\circ}C$), with no significant differences between the DCs of the test materials (p > 0.05). Conclusions: Although there were no significant differences in the DCs, the temperature rise under demineralized dentin disks for the silorane-based composite was higher than that for dimethacrylate-based restorative materials, particularly with QTH LCU.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.1057-1060
• /
• 2008

고강도 콘크리트는 낮은 물-시멘트 비와 혼화제의 첨가로 인해 타설 후 극 초기재령에서 큰 자기수축과 온도변형이 발생한다. 이것은 고강도 콘크리트 구조물의 초기재령에서의 균열을 초래할것이고, 고강도 콘크리트의 내구성에 영향을 미칠 것 이다. 그러므로 고강도 콘크리트의 초기재령 특성에 집중할 필요가 있다. 이 논문에서는 매설형 FBG 센서를 이용하여 고강도 콘크리트의 초기재령 특성을 모니터링 하였다. 결과에서는 고강도 콘크리트 타설 후 하루동안 변형이 급격히 증가함을 보여 주었다. 그리고 변형량의 값은 $85{\mu}{\varepsilon}$ 이상이며, 두달간의 변형량($280{\mu}{\varepsilon}$)의 30%에 해당한다. 고강도콘크리트의 내구성과 침투성을 고려하면, 첫째날의 변형률은 꽤 높아 무시할 수 없는 수치이다. 또한 연속성, 안정성, 다양한 복합기술 등 FBG 센서의 보다 높은 성능이 증명 되었다.

• 대한전자공학회논문지TE
• /
• 제39권2호
• /
• pp.6-10
• /
• 2002

플라스틱 기반 평판디스플레이 장치를 위한 Al 박막(1000-4000${\AA}$)을 직류-마그네트론 스퍼터링으로 유리 기판과 고분자 플라스틱 기판위에 증착하였다. 고분자 플라스틱 기판위에 증착된 Al박막의 전기적 특성을 향상시키고, 열 팽창을 줄이기 위하여 단계적 열 처리법을 사용하였다. 이러한 공정을 사용함으로써, 고분자 기판위에 증착된 박막의 크랙과 기판의 휨현상이 없는 Al 박막을 성공적으로 증착하였다. 또한, Al 박막의 열처리와 증착공정은 모두 200$^{\circ}C$ 이하에서 이루어 졌기 때문에, 이러한 저온 공정은 고분자 플라스틱 기판에 적용이 가능하다. Al 박막의 특성과 신뢰성을 조사하기 위하여 주사 전자 현미경(SEM), 원자력 현미경(AFM), X-선 회절 분석법(XRD)과 비저항등의 전기적 특성을 측정하였다.

• Elastomers and Composites
• /
• 제47권4호
• /
• pp.341-346
• /
• 2012

사출성형은 고분자성형법 중에서 가장 광범위하게 활용되고 있다. 사출성형은 전형적인 사출성형 외에 가스사출, 물사출, 그리고 사출압축성형 등과 같이 특수한 사출성형방법들이 쓰인다. 사출압축성형은 사출과 압축공정이 합쳐진 것으로 균일한 물성 및 성형의 정밀도를 향상시키기 위하여 사용된다. 또한 사출압축은 잔류응력을 줄이는데도 효과적으로 사용되고 있다. 본 연구에서는 성형품의 형상에 따라 다양하게 나타나는 사출압축성형의 특성에 대해서 컴퓨터 해석을 통해 분석하였다. 성형품에 벽이 있는 제품은 벽의 두께가 압축의 방향과 직각이므로 압축효과가 작게 나타났다. 사출압축성형을 일반사출성형과 비교하였을 때 수축의 균일성 및 수축량 또는 성형수축률이 작게 나타나서 정밀성형에 유리하게 나타났다. 실험계획법을 통해 실제로 제작되고 있는 렌즈에 대해서 최적 사출압축조건을 구하고 이의 결과를 사출성형의 결과와 비교분석하였다.

• 콘크리트학회논문집
• /
• 제14권1호
• /
• pp.92-99
• /
• 2002

본 연구는 고로슬래그 미분말의 치환율 변화에 따른 노출 콘크리트의 물리적 성질 및 표면 광택도 특성에 대하여 검토하였다. 실험결과, 고로슬래그 치환율 증가에 따른 공기량 및 유동성은 유사하게 나타났고, 단위용적중량은 저하하였다. 후기재령에서의 압축강도는 고로슬래그의 잠재수경성 반응에 기인하여 증가하였다. 건조수축은 커지는 것으로 나타났다. 노출 콘크리트의 표면 광택도는 W/B가 낮을수록 또한, 표면 도포인 경우 증가하였다. 고로슬래그 미분말의 치환율 증가에 따른 광택도는 고로 슬래그의 공극충전효과 및 백색도에 의하여 증가하였는데, 이때 고로슬래그 미분말의 치환율 10% 증가시 약 7% 정도 증가하였다. 거푸집 종류에 따라서는 아크릴, 치장합판, 철판, 일반합판 순으로 광택도가 우수한 것으로 나타났다.