• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.147-152
• /
• 2000

The ASF(Automatic Sheets Feeders) part of the printer has many bosses supporting gear-trains. Steel-pin bosses are substituted for plastic mold bosses because of advantages such as cost reduction, convenience of manufacturing and accuracy in dimension, but they have a weak point such as fatigue fracture due to low material strength, which causes a serious problem in the reliability of product. To prevent the fatigue fracture of bosses, we should exactly estimate the life to failure of the various shapes of bosses. We take the linear FEM analysis and the statistical method in this paper to figure out the life to failure of bosses. The maximum stress and life to failure of bosses can be easily estimated by this method. This paper specifies how to figure out the life to failure of bosses.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.502-505
• /
• 2002

A singl-phase power factor corrected converter for switched reluctance motor driving is presented to achieve sinusoidal, near unity power factor input currents. Because it combines a power factor corrected converter and a conventional asymmetric SRM driver Into one power stage, the configuration has a simple structure resulted in low cost. A prototype to drive 6/6 poles SRM employing a parking magnet is designed to evaluate the proposed topology The characteristics and operational mode will be discussed in depth, and the validity of proposed driver will be verified through the experimental results.

• Journal of Electrical Engineering and Technology
• /
• 제5권4호
• /
• pp.623-630
• /
• 2010

This paper presents the implementation and characteristic analysis of a drive system for a three-phase permanent magnet motor with independent excitation winding that is applicable for electric bicycles. The design features improves the phase current waveform, output power, and torque by using advance angle control. This adjusts the phase angle of each phase current in relation to back EMF. In addition, a DC-side PI current control is performed through PWM generation circuit using a low-cost one-chip microcontroller and a CPLD chip, resulting in reduced system costs. Finally, the validity of this control scheme for driving electric bicycles and output/torque improvement characteristics are verified through analysis and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.450-451
• /
• 2010

In this paper, the low-cost drive circuit of dc motor for a multipurpose small-size electric vehicle is developed. In order to change smoothly the rotating direction of dc motor for traction, the operating sequence of both the field current and the armature voltage according to the angle of a pedal of vehicle is suggested. The simulation study is carrier out to verify the proposed method, and the control system is implemented with 8-bit AVR.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.167-169
• /
• 2002

A sensorless drive has serveral advantages; low cost and mechanical simplicity. This paper studies a comparison between observer and Kalman filter for sensorless speed control of induction motor. The simulation result generally shows good performances in the both sensoless control strategies. In case of considering noises, EKF algorithm shows a better performance. In case of considering parameter variation, observer algorithm shows a better performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1108-1110
• /
• 2000

The BLDCM(Brushless DC motor) has been the Trapezoidal Back Electromotive Force(EMF) due to a surface magnet rotor with nonlinear distribution and full-pitch windings. Theoretically, it should be fed with rectangular phase current in order to minimize torque ripple. But, because voltage source inverter drives BLDCM, perfectly rectangular phase currents are not available. Now in this paper, using fourier series coefficients, calculating the coefficients of harmonic current within available orders and each harmonic component are controlled on stationary frame. Only using four switches, low cost and small size drive can be made and proposed method will be more useful in industrial. Simulation and experimental results prove the validity of the proposed method.

• 산업기술연구
• /
• 제31권A호
• /
• pp.129-133
• /
• 2011

In this paper, a surface mounted permanent magnet synchronous motor(SPMSM) drive system for industrial sewing machine was developed. Even through a lowr-esolution encoder is used for a low cost, using a full order observer enables to estimate accurate speed and position. And it also compensates a disturbance torque caused by the belt between a load and a motor. In order to control precisely stop positions of a needle, a speed trajectory is calculated from the acceleration pattern which is obtained from the position reference. The performance of the developed system is verified by experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1019-1021
• /
• 2004

BLDCM(Brushless D.C. Motor) is widely used for industrial application because of high efficiency and high power density. Especially, in servo system and home appliance. BLDCM is very useful due to high control performance and low acoustic noise. In this paper, 2.5HP rated BLDCM controller and drive was developed for tread mill application. The prototype BLDCM has 4 poles rotor and 24 slots stator. Ferrite was used as a rotor magnet due to the cost and temperature characteristic. For the stable operation of tread mill. over current and high temperature can be detected by the DSP controller. For the commutation signal, switching patterns from the sensorless circuit and hall sensor signal are used in the DSP controller.

• 전력전자학회논문지
• /
• 제8권6호
• /
• pp.519-526
• /
• 2003

본 논문은 단상 SRM 구동을 위한 1단 방식의 역률 보상형 컨버터에 관한 연구이다. 기존의 SRM 구동에서의 역률 보상회로는 2단 방식의 구조로 구성이 복잡하고 소자의 수가 증가하여 경제적으로 불리한 단점을 가진다. 따라서, 부가적인 회로의 추가 없이 1단 방식의 단위 역률이 가능한 단상 SRM 구동회로를 제안한다. 제안된 회로에 대한 타당성을 시뮬레이션과 실험으로 검증한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.5-8
• /
• 2001

The low cost, ruggedness, and reliability of switched reluctance motor(SRM) drive makes them potentially suitable for many industrial applications. But the generation of a high-level torque ripple and the acoustic noise restricts the practical application range. This paper analyzes the torque characteristic of SRM according to rotor pole arc and the effect of turn-on and turn-off angles to reduce the torque ripple. The simulation result shows the different torque characteristic of each cases.