• Journal of Climate Change Research
• /
• 제6권4호
• /
• pp.291-302
• /
• 2015

Vulnerability due to climate change depends on the concentration of carbon dioxide emissions over several upcoming decades. The objective of this study is to estimate the concentration of greenhouse gases and air pollutants in 2100, while also accounting for expected socio-economic changes in Korea. First, we intend to prepare scenarios for possible socioeconomic changes in Korea: business as usual (BAU), high growth and low growth. Secondly, we aim to predict services demands in residential?commercial sector, transportation sector, industrial sector for each scenarios. Finally, the emissions of LLGHG and SLCP will be estimated on the basis of the predicted service demands. The study results project that in Korea, LLGHG emissions will be approximately $660Mt\;CO_2\;eq$. and SLCP emissions will be approximately 3.81 Mt, -including black carbon (BC) by 2100. The transportation and industrial sectors are the major source for LLGHG emissions, and the residential and commercial sector serve as the SLCP source. Later, additional studies on the cost and benefit of mitigation should be carried out by comparing the reduced use of materials that cause climate change as a result of reduction policies and the socioeconomic cost.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.146-147
• /
• 2021

An increase in carbon emissions leads to the problem of global warming and is an issue to be solved in other countries. The problem of carbon dioxide has many effects not only on global warming but also on people. According to the World Health Organization (WHO), 4.3 million people have died because harmful substances generated indoors cannot be discharged to the outside and accumulate in the human body through the respiratory tract. In response to this situation, in order to reduce the generation of pollutants in the building itself, soak into lightweight bubble concrete to adsorb and purify indoor pollutants, mix charcoal, investigate the appropriate amount and physical characteristics, and check carbon dioxide This is an experiment for grasping the adsorption capacity, and the results are as follows. As the replacement rate of rice husk charcoal increased, the compressive strength tended to decrease, and the carbon dioxide reduction rate tended to increase. It is judged that the charcoal of rice husks shows a low density and the physical adsorption is smooth due to the porous structure. Since it is excellent in the basic physical properties and carbon dioxide adsorption surface of this experiment, it is judged that it has sufficient potential for use as an indoor finishing material.

• Journal of Power System Engineering
• /
• 제21권1호
• /
• pp.63-69
• /
• 2017

The combustion characteristics of gasoline and diesel were tested in a compression ignition engine. Both fuels were used with same common rail injection system. Combustion experiment showed that low load condition of 0.45 MPa IMEP (indicated mean effective pressure) was tested in metal and optical engines. The gasoline combustion showed higher hydrocarbon and carbon monoxide emissions but lower soot emission compared with diesel combustion. NOx emissions were very high at late injection timing but significantly decreased at early injection timing due to the lean combustion resulted from vigorous mixing process. Direct combustion visualization showed that the diesel combustion was dominated by diffusion combustion exhibiting soot incandescence and the gasoline combustion was mostly consisted of premixed combustion showing blue chemiluminescence.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제28권3호
• /
• pp.324-329
• /
• 2004

As a new concept in engines and a power source for future automotive applications, the HCCI(Homogeneous Charge Compression Ignition) engine has been introduced. Essentially a combination of spark ignition and compression ignition engines, the HCCI engine exhibits low NO$_x$ and PM emissions as well as high efficiency under part load. In this research, a 4 cylinder diesel engine was converted into a HCCI engine, and propane was used as the fuel. The main parameters for this research are fuel flow rate and the temperature of the intake manifold, and the effects of such on a HCCI engine's performance and exhaust was investigated.

• International conference on construction engineering and project management
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.188-195
• /
• 2013

Construction operations generate a significant amount of air pollutant emissions, including carbon emissions. The environmental performance of construction operations is closely relevant to the operational efficiency of each resource employed, which indicates how efficiently each resource (e.g., construction equipment) is utilized. In this context, monitoring the operational efficiency of construction equipment provides key information in managing and improving the environmental performance and productivity of construction operations. In this paper, we report our efforts to measure the operational efficiency of construction equipment, using low-cost accelerometers. An experimental study and real-world case studies are conducted to demonstrate the feasibility of the proposed approach. The results have shown the potential of this approach as an economically feasible means of monitoring the environmental performance of construction operations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제22권6호
• /
• pp.196-207
• /
• 2023

As part of measures to address the climate crisis, buses are also being converted to electric and hydrogen buses. Local authorities need to prioritize carbon emissions when allocating newly introduced and converted electric and hydrogen buses, and as a method, consider the introduction of Low Emission Bus Zones (LEBZ) to propose the reduction of pollution from specific links. To introduce LEBZ, it is necessary to compare the carbon emissions before and after its implementation, yet there is a shortage of studies that focus solely on buses or analyze the effects of introducing LEBZ to specific links. In this paper, we utilized bus information system data to calculate and compare the effects of introducing LEBZ to bus priority lanes in Jeju. We categorized scenarios into five groups, with scenarios 1 through 4 involving the introduction of LEBZ, and scenario 5 designating cases where LEBZ was not introduced. Comparative results confirmed that in scenarios with LEBZ introduction, the reduction per km reached a maximum of 0.097t per km, whereas in cases without LEBZ, it amounted to 0.022t per km, demonstrating higher efficiency. It underscores the significance of conducting carbon emission calculations and comparing the effects of LEBZ introduction using bus information system data, which can be directly applied by local authorities to make informed and rational decisions.

• New & Renewable Energy
• /
• 제16권2호
• /
• pp.14-19
• /
• 2020

Recently, a project to build a carbon zero island with no carbon emissions has been carried out by replacing diesel generators with renewable energy sources in island areas where diesel generators supplied local loads as independent systems. To minimize damage to the lives of islanders, low noise wind generators should be installed by adjusting the rated speed. In islands with low loads, wind turbines that are more efficient than medium-sized wind turbines should be installed. In this study, the generator field analysis and characteristics were analyzed to develop 230 kW-class low wind medium-wind turbine technology. The electromagnetic field analysis program used Maxwell. As a result, the cogging torque was reduced, and the initial maneuver wind speed and loss value were lowered. Hence, the output amount was increased with high efficiency.

• Journal of Power System Engineering
• /
• 제19권2호
• /
• pp.64-69
• /
• 2015

Marine diesel engines with high thermal efficiency and fuel diversity used for propulsive power have been taking charge of important position on marine transport. However, marine environment has recently focused on emissions such as nitrogen oxide and sulfur oxide which is generated from combustion of low grade fuels. EGR(Exhaust gas recirculation) system is one of effective methods to reduce the nitrogen oxide emission from marine diesel engines. In general, it is considered that recirculating gas influences fuel combustion and emissions in diesel engines. However, along with positive effects of EGR, the EGR system using fuels of including high sulfur concentration should be considered about re-combustion and activation of sulfur dioxide in recirculating gas. Therefore, in experimental study, an author investigates effects of sulfur dioxide mixture concentration in intake air on combustion and exhaust emission characteristics in a direct injection diesel engine. In results, change of sulfur dioxide concentrations in intake air had negligible impact on combustion chamber pressure, rate of heat release and emissions compared with effects of oxygen decreasing and carbon dioxide increasing of EGR.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1369-1377
• /
• 2021

Nowadays, it is necessary to accelerate the construction of new power plant in face of rising energy demand in such a way that the electricity will be generated at the lowest cost while reducing emissions caused by that generation. The expansion planning is one of the most important issues in electricity management. Nuclear energy comes forward with the low-carbon technology and increasing competitiveness to expand the share of generated energy by introducing Gen IV reactors. In this paper, the generation expansion planning of these new Gen reactors is investigated using the WASP software. Iran power grid is selected as a case of study. We present a comparison of the twenty-one year perspective on the future with the development of (1) traditional thermal power plants and Gen II reactors, (2) Gen III + reactors with traditional thermal power plants, (3) Gen IV reactors and traditional thermal power plants, (4) Gen III + reactors and the new generation of the thermal power plant, (5) the new generation of thermal power plants and the Gen IV reactors. The results show that the Gen IV reactors have the most developing among other types of power plants leading to reduce the operating costs and emissions. The obtained results show that the use of new Gen of combined cycle power plant and Gen IV reactors make the emissions and cost to be reduced to 16% and 72% of Gen II NPPs and traditional thermal power plants, respectively.

• Journal of Microbiology and Biotechnology
• /
• 제31권1호
• /
• pp.104-114
• /
• 2021

Petroleum-contaminated soil is considered among the most important potential anthropogenic atmospheric methane sources. Additionally, various rhizoremediation factors can affect methane emissions by altering soil ecosystem carbon cycles. Nonetheless, greenhouse gas emissions from soil have not been given due importance as a potentially relevant parameter in rhizoremediation techniques. Therefore, in this study we sought to investigate the effects of different plant and soil amendments on both remediation efficiencies and methane emission characteristics in diesel-contaminated soil. An indoor pot experiment consisting of three plant treatments (control, maize, tall fescue) and two soil amendments (chemical nutrient, compost) was performed for 95 days. Total petroleum hydrocarbon (TPH) removal efficiency, dehydrogenase activity, and alkB (i.e., an alkane compound-degrading enzyme) gene abundance were the highest in the tall fescue and maize soil system amended with compost. Compost addition enhanced both the overall remediation efficiencies, as well as pmoA (i.e., a methane-oxidizing enzyme) gene abundance in soils. Moreover, the potential methane emission of diesel-contaminated soil was relatively low when maize was introduced to the soil system. After microbial community analysis, various TPH-degrading microorganisms (Nocardioides, Marinobacter, Immitisolibacter, Acinetobacter, Kocuria, Mycobacterium, Pseudomonas, Alcanivorax) and methane-oxidizing microorganisms (Methylocapsa, Methylosarcina) were observed in the rhizosphere soil. The effects of major rhizoremediation factors on soil remediation efficiency and greenhouse gas emissions discussed herein are expected to contribute to the development of sustainable biological remediation technologies in response to global climate change.