• Laser Solutions
• /
• v.15 no.2
• /
• pp.11-14
• /
• 2012

In this paper, we have made a proposal concerning the beam shaping mask(BSM) using random-array slits to control intensity distribution profile of laser beam and demonstrated its proprieties experimentally. When a lot of slits are set out irregularly, diffraction patterns of light does not appear but granularity patterns as a bundle of fibers appear. Intensity distribution profile is controlled by densities distribution of circular slits arrayed randomly because the number of slits and its area means amount of light energy through BSM. Namely as the number of slits in high intensity area is increased and that in low intensity area decreased, amount of light energy is same over all local parts. So gaussian intensity distribution could be changed to flat-top.

• Annual Conference of KIPS
• /
• 2016.04a
• /
• pp.897-899
• /
• 2016

In recent years, BLE technology has received extensive attention and has been applied to all aspects of life. The existing BLE device has two methods, one is the connection method, and the other is a non-connection method. The representative profile of the connection method is the proximity file. The most typical example of Non-connection method BLE device is a beacon. However, they are both independent and have their own shortcomings. Connection method device can provide service for only one user, others can't use. Security performance of Non-connection method BLE device is poor and the device can't be controlled by the user. In this paper, a combination-mode BLE device profile design scheme is presented, which combines with the previous two methods, and solves the defaults. And We define a dual purpose advertising package that can be used in a normal environment as well as in a disaster environment. Finally, a unidirectional Control idea is proposed. Through performance evaluation, we found that the device has strong stability and low power consumption.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.146-158
• /
• 1996

The WKB method has been widely used in evaluating of the propagation characteristics of planar waveguides with graded-index profiles. This method, however, yields large errors when a turning point is near or at the discontinuity in the presence of the index discontinuity or index slope discontinuity. Especially, in the case of a truncated-index profile, this phenomenon appears more clearly in the low-order modes and near the cutoff regions. The MWKB method is introduced to reduce these inherent errors of the conventional WKB method. The MWKB method is based on both the linearization of the index profile from an index discontinuity and the introduction of a virtual turning point. It is noticed that the b-v curves obtained by the MWKB method agree well with those of the finite-difference method, and that the phase shift at a turning point depends on both the index profile and its propagation constant. (author). refs., figs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.242-242
• /
• 2010

Si(100) 표면에 이온을 일정한 에너지로 dose량을 동일하게 유지하고, dose rate만을 변화시켜가며 주입한 후에 depth profile과 damage, 그리고 sheet resistance를 조사하였다. 일정한 에너지로 이온을 주입하여도 dose rate의 변화에 따라서 depth profile에 변화를 보이는 것을 확인할 수 있었고 sheet resistance역시 dose rate변화에 비례하여 변화하는 것을 확인할 수 있었다. 본 연구는 Crystal-TRIM program으로 computer simulation 하여 damage profile의 결과를 통해 dose rate가 클수록 시료 표면 근처에 잔류 damage의 양이 높게 나타나는 것을 알 수 있었고 그 잔류 damage의 표면근방 분포가 sheet resistance에 직접적인 영향을 미친다는 것을 확인할 수 있었다.

• Journal of Surface Science and Engineering
• /
• v.45 no.4
• /
• pp.174-180
• /
• 2012

Low pressure inductively coupled plasma characteristics of argon and oxygen are numerically simulated for a 400 mm rectangular type system with a plasma fluid model. The results showed lower power absorption profile at the corner than a circular one in a 13.56 MHz driven 1.5 turn antenna system with a drift-diffusion and quasi-neutrality assumption. Ions controlled by electric field are more non-uniform than metastables and the power absorption profile of oxygen plasma is affected by horizontal gas flow pattern to show 25% lower power absorption at the pumping flange side. Oxygen negative ions which are generated in electron collisional dissociation of oxygen molecules was calculated as 0.1% of oxygen atoms with similar spatial profile.

• Educational Technology International
• /
• v.18 no.1
• /
• pp.27-47
• /
• 2017

Smart devices have a variety of affordances to foster meaningful learning in elementary school. For the design of smart learning environments, more research is needed to understand students' smart device usage and their perception of learning with smart devices. In order to capture smart device usage profiles among elementary school students in South Korea, this study carried out Latent Profile Analysis with three constructs: information search, communication, and study. Participants (n=253), who ranged from the fourth to the sixth grade students, were classified into three profiles of smart device usage: low-activity, communication, and high-activity groups. The smart device usage profiles varied depending on smartphone usage experience, and the profiles were significantly related with smart device addiction, not with smart device usage ability. Perceptions of smart education were also significantly associated with the profiles. The high-activity group showed more positive attitudes toward smart education than the others, but no significant difference was found in regard to negative attitudes. Based on the findings, this study discussed implications for the use of smart devices in elementary school.

• Korean Journal of Social Welfare
• /
• v.68 no.2
• /
• pp.213-232
• /
• 2016

The purpose of this study is to explore the stress profile that adolescent perceives by using Latent Profile Analysis (LPA), and to examine the effect of characteristics variable per groups that appeared in profile. By using the cross-section data of 'A survey on the human right of Korean children and adolescent in 2013' issued by National Youth Policy Institute, the LPA concerning the stress type was conducted and surveyed 9,521 adolescents from fourth grade in elementary school to seniors in high school nationwide. The result of this study shows that two class types were selected according to the goodness-of-fit index and latent class classification rate. Type 1 is named low-risk group as they show low level, whereas type 2 is named relative risk group as they show high level. In order to predict the characteristics of adolescent stress, the study conducted Binary Logistic Regression analysis on the basis of low-risk group. There is higher probability to belong to relative risk group, the more they are female students than male students, the less their subjective health condition and happiness, the more runaway experience, the less school grades and the less economic affluence in their household. The implication of this research, its limitation and direction of follow-up research were suggested.

• Advances in aircraft and spacecraft science
• /
• v.9 no.5
• /
• pp.415-431
• /
• 2022

Secondary flows have a huge impact on losses generation in modern low pressure gas turbines (LPTs). At design point, the interaction of the blade profile with the end-wall boundary layer is responsible for up to 40% of total losses. Therefore, predicting accurately the end-wall flow field in a LPT is extremely important in the industrial design phase. Since the inlet boundary layer profile is one of the factors which most affects the evolution of secondary flows, the first main objective of the present work is to investigate the impact of two different inlet conditions on the end-wall flow field of the T106A, a well known LPT cascade. The first condition, labeled in the paper as C1, is represented by uniform conditions at the inlet plane and the second, C2, by a flow characterized by a defined inlet boundary layer profile. The code used for the simulations is based on the Discontinuous Galerkin (DG) formulation and solves the Reynolds-averaged Navier-Stokes (RANS) equations coupled with the Spalart Allmaras turbulence model. Secondly, this work aims at estimating the influence of viscosity and turbulence on the T106A end-wall flow field. In order to do so, RANS results are compared with those obtained from an inviscid simulation with a prescribed inlet total pressure profile, which mimics a boundary layer. A comparison between C1 and C2 results highlights an influence of secondary flows on the flow field up to a significant distance from the end-wall. In particular, the C2 end-wall flow field appears to be characterized by greater over turning and under turning angles and higher total pressure losses. Furthermore, the C2 simulated flow field shows good agreement with experimental and numerical data available in literature. The C2 and inviscid Euler computed flow fields, although globally comparable, present evident differences. The cascade passage simulated with inviscid flow is mainly dominated by a single large and homogeneous vortex structure, less stretched in the spanwise direction and closer to the end-wall than vortical structures computed by compressible flow simulation. It is reasonable, then, asserting that for the chosen test case a great part of the secondary flows details is strongly dependent on viscous phenomena and turbulence.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.828-837
• /
• 2020

This paper presents the optimal design of planar flyback transformer suitable for small-size and low-profile of AC to DC adapter for 10W tablet. This paper also proposes the injection winding transformer of Hybrid and Drum types capable of the winding method of automatic type and the reduction of transformer size and leakage inductance(L_k) compared to the conventional mass-production flyback transformer with the winding method of manual type. In particular, the injection winding transformer of Drum type proposed in this paper is constructed in a horizontal laying of its transformer to solve the connection problem of copper plate injection winding on the secondary side of the one of Hybrid type. The primary and secondary windings of the injection winding transformer of Hybrid and Drum types used the conventional winding and the copper plate injection winding, respectively. For the injection winding transformer of Hybrid and Drum types proposed in this paper, the optimal design of planar flyback transformer suitable for small-size and low-profile was carried out using Maxwell 2D and 3D tool.

• Food Science of Animal Resources
• /
• v.36 no.5
• /
• pp.679-688
• /
• 2016

The aim of this research was to evaluate: 1) the fatty acid profile of ten muscles from high marbled (HM, quality grade 1⁺⁺) and low marbled (LM, quality grade 2) Hanwoo carcass, 2) the relationship between the fatty acid profile and sensory traits. There were significant (p<0.001) differences in fat content and fatty acid composition among the 10 muscles obtained from HM and LM Hanwoo steers. The proportions of SFA (saturated fatty acid), MUFA (monounsaturated fatty acid) and PUFA (polyunsaturated fatty acid) were significantly (p<0.001) different among the 10 muscles due to differences in all fatty acids except eicosapentaenoic acid (EPA, C20:5n-3). The high-fat muscles had a lower n-6/n-3 ratio compared to the low-fat muscles (p<0.001). LM muscles had a significantly (p<0.05) higher proportion of SFA than HM muscles due to a higher proportion of stearic acid (C18:0). On the contrary, HM muscles had a significantly (p<0.01) higher proportion of MUFA than LM muscles due to higher oleic acid (C18:1n-9) proportion. SFA had a significant correlation with CIE a* (r=0.281; p<0.01) and drip loss (%) (r=−0.233; p<0.001). Cooking loss (%) had a significantly (p<0.05) negative correlation with PUFA (r=−0.233; p<0.05). Overall palatability was positively correlated with SFA (r=0.262; p<0.01), but negatively correlated with PUFA (r=−0.567; p<0.001). There was no significant correlation between oleic acid and any of the sensory traits (p>0.05).