• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.3
• /
• pp.75-84
• /
• 1994

In general direct-operated pressure reducing valves have been gardly applied to a dynamic control system such as active suspension control because of their poor control stability. But they are more robust than pilot-operated type and do not need pilot control flow. In this paper development of a new direct-operated proportional pressure reducing valve for low-band type active suspension control is reported. By means of a special damper directly linked to the valve spool, the control stability could be effectively improved without drawback in response time. The linearity error was less than $\pm$3.5%. Applied to an experimental active suspension system the new valve showed the $-90^{\circ}$ phase delay at 4Hz with 20% sinusoidal signal input and could control the suspension system with almost same performance as that with a pilot-operated type valve.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.4
• /
• pp.27-38
• /
• 1994

In this paper, a simplified model of a hydraulic actuator system for a low-band type active suspension system is derived. To reduce the order of model, time constants of each chamber in hydraulic system are neglected except that of an accumulator. And the dynamics of a spool in the pressure control valve is regarded as a first-order system. The step response and the frequency response of the simplified second-order simulation model exhibit a good agreement with those of the actual system as well as those of the tenth-order simulation model. It is possible to simplify the tenth-order model to the second-order one. The low-band type active suspension model is built up by combining of a quarter car model test rig to testify the validity of the simplified model. The experimental results of suspension characteristics show that the simplified second-order hydraulic actuator model is reasonable to describe the dynamics of the actual hydraulic actuator system for a low-band type active suspension system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.73-82
• /
• 1994

Low-band type active suspension system is implemented on a passenger car. Level. roll, pitch and bouncing motion of body are controlled by a digital controller. Sky-hook damper is applied to control bouncing motion. This paper describes overall construction of the system, design of hydraulic system, sensor system, controller, and control scheme. Performance of prototype car has been evaluated on a test track and reported in the second paper.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.2
• /
• pp.83-94
• /
• 1994

Performance test result on prototype car equipped with low-band type active suspension system is reported. Control theory is explained first. Simulation for feasibility and parameter tuning, control module test using hydraulic exciter and test run, and performance evaluation of the test car on test track are reported successively. Emphasis was put on modification of control theory which caused many unexpected problems in actual implementation.

• Journal of KSNVE
• /
• v.3 no.4
• /
• pp.383-394
• /
• 1993

An automotive suspension system generally behaves like a low frequency band-pass filter(0.5 - 10 Hz). Passengers are very sensitive to this frequency range in terms of ride quality and road holding ability. In this paper, a LQG/ LTR controller is suggested to improve the ride quality and road holding ability in the specified frequency rage. It has been found by numerical simulation that the ride quality and road holding ability can be improved in the frequency ranges of 0.5 - 3.0 Hz and 0.3 - 2.1 Hz respectively. In addition, a new approach using root locus to evaluate the stability robustness of the active suspension system is studied. It is shown that the stability robustness of the LQG/LTR controller designed in this paper is improved, compared to the passive system.