• 제목/요약/키워드: Low voltage cable

검색결과 124건 처리시간 0.038초

Output filter design for conducted EMI reduction of PWM Inverter-fed Induction Motor System

  • Kim Lee-Hun;Won Chung-Yuen;Kim Young-Seok;Choi Se-Wan
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.761-767
    • /
    • 2001
  • In this paper, filtering techniques to reduce the adverse effects of motor leads on high-frequency PWM inverter fed AC motor drives will be examined. The filter was designed to keep the motor terminal from the cable surge impedance to reduce overvoltage reflections, ringing, and the dv/dt, di/dt. Therefore, filtering techniques are investigated to reduce the motor terminal overvoltage, ringing, and EMI noise in inverter fed ac motor drive systems. The output filter is used to limit the rate of the inverter output voltage and reduce EMI(common mode noise) to the motor. The performance of the output filter is evaluated through simulations (PSIM) and experiment on PWM inverter-fed ac motor drive(3phase, 3hp(2.2kw), input voltage 220/380V, induction motor). An experimental PWM drive system reduction of conducted EMI was implemented on an available TMS320C31 microprocessor control board. Finally, experimental results showed that the inverter output filter reduces more CM noise than the LPF(low pass filter) and reduce overvoltage and ringing at the motor terminal.

  • PDF

PWM 인버터 시스템에서의 전도노이즈 저감을 위한 출력필터 설계에 관한 연구 (Output Filter Design for Conducted EMI Reduction of PWM Inverter-Fed AC Motor Drive System)

  • 김이훈;박규현;원충연;김영석;최세완
    • 전력전자학회논문지
    • /
    • 제6권6호
    • /
    • pp.546-555
    • /
    • 2001
  • 본 논문에서는 PWM 인버터-유도전동기 구동시스템의 전도노이즈 저감을 위한 출력필터 설계에 관한 연구를 수행하였다. 전도노이즈는 고전압 입력, 고용량 구동시스템 그리고 긴 전동기 터미널 등의경우에서 크게 문제가 된다. 고압력을 갖는 시스템에서는 높은 압력에 비례한 직류 링크 전압을 갖고 이에 따라 스위칭 dv/dt가 순간 최대 CM 접지전류를 발생시킨다. 그러므로 이에 대한 대책이 필요하다. 따라서 최근 산업 현장에서 많이 사용되고 있는 PWM 인버터를 설계 제작하여 유도전동기를 구동하고 이에 따라 발생되는 전도노이즈 성분을 감쇠 시킬 수 있는 출력필터를 설계하였고 제작 및 실험을 통하여 그 타당성을 입증하였다.

  • PDF

배전피뢰기용 접지도선의 효과적인 설치기법 (Effective Installations Technique of Grounding Conductors for Metal Oxide Surge Arrestors)

  • 이복희;강성만;유인선
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제51권6호
    • /
    • pp.253-259
    • /
    • 2002
  • This paper deals with the effects of grounding conductors for metal oxide surge arresters. When surge arresters are improperly installed, the results can cause costly damage of electrical equipments. In particular, the route of surge arrester connection is very important because bends and links of leads increase the impedances to lightning surges and tend to nullify the effectiveness of a grounding conductor. Therefore, there is a need to know how effective installation of lightning surge arresters is made in order to control voltage and to absorb energy at high lightning currents. The effectiveness of a grounding conductor and 18 [㎸] metal oxide distribution line arresters was experimentally investigated under the lightning and oscillatory impulse voltages. Thus, the results are as follows; (1) The induced voltage of a grounding conductor is drastically not affected by length of a connecting line, but it is very sensitive to types of grounding conductor. (2) The coaxial cable having a low characteristic impedance is suitable as a grounding conductor. (3) It is also clear from these results that bonding the metal raceway enclosing the grounding conductor to the grounding electrode is very effective because of skin effect. (4) The induced voltages of grounding conductors for the oscillatory impulse voltages are approximately twice as large as those for the lightning impulse voltages.

극저주파 자기장의 소아백혈병 발생 위험 고찰 (Review on the Association between Exposure to Extremely Low Frequency-Magnetic Fields (ELF-MF) and Childhood Leukemia)

  • 박동욱
    • 한국환경보건학회지
    • /
    • 제49권2호
    • /
    • pp.57-65
    • /
    • 2023
  • Background: The association between exposure to extremely low frequency-magnetic fields (ELF-MF) and childhood leukemia has been controversial. There is a need to clarify this relationship by summarizing key conclusions from systematic review articles. Objectives: The major aim of this study is to summarize key conclusions from systematic review articles on the association between exposure to ELF-MF and childhood leukemia based on childhood exposure to ELF-MF, proximity from childhood household to high voltage cables, and parental occupational exposure to ELF-MF. Methods: This study was conducted through a brief literature review focusing on systematic, meta-analysis, and pooled analysis methods. We conducted a literature search in PubMed using the key words "ELF-MF" and "childhood leukemia" singly or combined. Results: In 2002, the World Health Organization (WHO)'s International Agency for Research on Cancer (IARC) reviewed two manuscripts to conduct pooled analysis and concluded that there is a significant association between exposure to >0.3 μT or 0.4 μT and childhood leukemia. We found a total of four manuscripts for systematic or pool analysis that have been published since the IARC's conclusion. They consistently concluded that there was a significant association between exposure to >0.4 μT and childhood leukemia compared to ELF-MF exposure to below 0.1 μT. The proximity of children's households to high voltage cable lines and occupational exposure by their parents to ELF-MF during certain periods prior to or during pregnancy were inconsistently associated with childhood leukemia. The study found that many EU countries have implemented precautionary policies to prevent potential childhood leukemia due to exposure to ELF-MF. Conclusions: This study recommends implementing a precautionary policy that includes legal exposure limits for ELF-MF to minimize exposure to ELF-MF.

저압용 전력 케이블 결함 진단 장치 개발 (Development of Low Voltage Power Cable Fault Diagnosis System)

  • 전정채;김택희;최명일;김재진;유재근;오훈
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2016년도 전력전자학술대회 논문집
    • /
    • pp.15-16
    • /
    • 2016
  • 본 논문에서는 케이블 결함과 위치를 검출하기 위한 SSTDR(spread spectrum domain reflectomerty) 기반의 진단 장치를 개발하였다. 개발된 진단 장치는 sstdr 기법의 검출 성능을 향상시키기 위해 시간-주파수 상관 분석을 이용하여 기준신호(reference signal)의 상관계수 최댓값 위치를 검출 한 후 기준신호를 제거하여 반사신호의 상관계수의 최댓값 위치를 검출하는 2단계 과정을 갖는다. 개발된 케이블 결함 진단 장치는 실증 시험장을 구축하고, 성능시험을 실시한 결과, ${\pm}1%$ 내 외의 오차를 갖는 것으로 확인되었다.

  • PDF

VLF 및 HFCT-PD 장비를 이용한 원자력발전소 고압케이블 진단 방법 (Diagnostic Method of High Voltage Cable for Nuclear Power Plants using VLF and HFCT-PD Devices)

  • 하체웅;주광호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.2067-2068
    • /
    • 2011
  • 국내 원자력발전소에 설치되어 있는 고압케이블은 장기 운전에 따라 열화진단 및 유지보수의 필요성이 증대되고 있으며, 주기적 안전성 평가(Periodic Safety Review) 및 계속운전과 관련하여서도 고압케이블의 관리방안이 지속적으로 요구되고 있다. 본 논문에서는 원자력발전소에서 경년열화로 진단되어 철거된 케이블을 수거하여 VLF(Very Low Frequency) 장비를 사용하여 가압을 한 후 HFCT(High Frequency Current Transformer)를 이용한 부분방전(Partial Discharge ; PD) 측정을 수행하여 향후 원자력발전소 계획예방정비 시 케이블을 대상으로 Off-line 부분 방전 진단이 가능한지를 검토하였고, 그 결과를 기술하였다.

  • PDF

저압 절연전선의 허용전류 계산을 위한 열적 파라메타 검토 (The Investigation of the Thermal Parameters of Calculating Ampacity of Low-Voltage Insulated Cables)

  • 정성환;남기영;이재덕;최상봉;류희석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
    • /
    • pp.272-273
    • /
    • 2006
  • Recently KS standards being kept in step with IEC standard in electrical safety. This paper examines thermal parameters of KS C IEC 60364-5-523(2002) to calculating the ampacity of insulated cable at 1kV below.

  • PDF

Dodecyl Alcohol이 첨가된 P.E에서 온도변화에 따른 Treeing에 관한 연구 (The Study on Treeing under the Temperature Variation in Low Density Polyethylene Mixed with Dodecyl Alcohol)

  • 이창희;이계안;김상준;김정수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1989년도 추계학술대회 논문집 학회본부
    • /
    • pp.75-78
    • /
    • 1989
  • Insulation of P.E insulated cable under the field of high-voltage will be breakdown ultimately due to the degradation process called 'Treeing' which is generated in the insulation, so long as any counter-measure suppressing or eliminating it could not be provided. In this paper as a counter-measure Dodecyl Alcohol is mixed with P.E and Treeing under the temperature variation has been observed. Results show that the larger weight ratio of Dodecyl Alcohol is stronger the effect of suppressing Tree ing in the range from room temperature to 40$^{\circ}C$ and generated Treeing has been soon eliminated and it never again generated.

  • PDF

천해용 Side Scan Sonar의 송수신 시스템 구현 및 운용에 관한 연구 (Development of a Side Scan Sonar System for Underwater Sun)

  • 오영석;이철원;강도욱;우종식
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2000년도 추계학술대회 논문집
    • /
    • pp.222-227
    • /
    • 2000
  • "Side scan sonar" using acoustic signal has been developed to survey cable laying, sunken bodie\ulcorner bottom and so on. It use the acoustic signals, which are emitted from two transducer arrays, to get gemetri\ulcorner target area. This system consists of transceiver board, towed body, and deck unit. The transceiver board, w\ulcorner watertight canister of the towed body, controls the transmitting and receiving of 400kHz acoustic signals from \ulcorner After receiving the scattered signals, it processes the filtering, AGF(Automatic Gain Control), TVG(Time Heterodyne. The deck unit is composed of the signal processing part, A/D converter, power supplier, and real\ulcorner And the towed body has been designed to satisfy the optimal hydrodynamic behavior during towing. The de\ulcorner theory of transceiving part and some results from field-experiments will be introduced here.

  • PDF

전기화재 예측을 위한 마이컴 프로세서 알고리즘 설계에 관한 연구 (A Study on the Design of Microcomputer Processor Algorithm for Electrical Fire Prediction)

  • 곽동걸;최정규;이봉섭;최신형
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2015년도 전력전자학술대회 논문집
    • /
    • pp.11-12
    • /
    • 2015
  • This study has looked into ways to cut the power supply by predicting electrical fire that may occur in low-voltage cable, which is most frequently used in industrial settings and households. In addition, we have designed a system that cuts off electricity to prevent the fire upon occurrence of events that may cause electrical fire, including short circuit, tracking and contact failure. A lot of previous researches have designed arc suppressors built in analog circuit, which left much to be desired such as difficulty in remote control and inability to identify the location of arc suppressor when it is activated. To address these issues, the study seeks to develop an arc suppressor using micom and to verify its performance through simulations designed to detect arc faults.

  • PDF