• Clinical and Experimental Pediatrics
• /
• v.50 no.10
• /
• pp.1011-1017
• /
• 2007

Purpose : We tried to assess the optimal conditions to improve low transduction efficiency and their effect on target cells. Methods : Cultured NIH 3T3 cells were incubated with retroviral vectors bearing an enhanced green fluorescent protein (eGFP) gene. We varied the ratio of viral vectors to target cells (1:1-1:8) and the number of transfections (${\times}1$, ${\times}2$), and compared transduction efficiencies. Also, the effects of polybrene on transduction efficiency and viability of target cells were assessed. Transduction of the eGFP gene was evaluated by observing NIH 3T3 cells under a fluorescence microscope and efficiencies were measured by the percentage of eGFP positive cells using FACscan. Results : As the ratio of retroviral vectors to target cells increased, transduction efficiency was greatly improved, from 7% (1:1) to 38% (1:4). However, transduction efficiency did not increase any more when the ratio increased from 1:4 to 1:8. Cells transfected twice showed higher transduction efficiencies than cells transfected once, at a ratio of 1:8. The eGFP gene transduced to NIH 3T3 cells sustained its expression during repeated passages. However, after the third passage (day 9), the percentage of eGFP positive cells began to decline. The degree of this decline in eGFP expression was lower in cells transfected twice than in cells transfected once (P<0.05). The addition of polybrene did not have any toxic effect on NIH 3T3 cells and greatly increased transduction efficiency (P=0.007). In addition to vector component, transduction efficiency was very sensitive to culture confluence. Cells cultured and transfected in 24-well plate showed higher transduction efficiency, although cells cultured in 6- well plate proliferated more (P=0.024). Conclusion : Our data could be used as a basis for retrovirus-based gene therapy. Further study will follow using human cells as target cells.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.69-75
• /
• 2006

Improper disposal of petroleum and spills from underground storage tanks have created large areas with highly toxic contamination of the soil and groundwater. Methyl tert-butyl ether (MTBE) is widely used as a fuel additive because of its advantageous properties of increasing the octane value and reducing carbon monoxide and hydrocarbon exhausts. However, MTBE is categorized as a possible human carcinogen. This research investigated the Modified Photo-Fenton system which is based on the Modified Fenton reaction and UV light irradiation. The Modified Fenton reaction is effective for MTBE degradation near a neutral pH, using the ferric ion complex composed of a ferric ion and environmentally friendly organic chelating agents. This research was intended to treat high concentrations of MTBE; thus, 1,000 mg/L MTBE was chosen. The objectives of this research are to find the optimal reaction conditions and to elucidate the kinetic and mechanism of MTBE degradation by the Modified Photo-Fenton reaction. Based on the results of experiments, citrate was chosen among eight chelating agents as the candidate for the Modified Photo-Fenton reaction because it has a relatively higher final pH and MTBE removal efficiency than the others, and it has a relatively low toxicity and is rapidly biodegradable. MTBE degradation was found to follow pseudo-first-order kinetics. Under the optimum conditions, [$Fe^{3+}$] : [Citrate] = 1 mM: 4 mM, 3% $H_2O_2$, 17.4 kWh/L UV dose, and initial pH 6.0, the 1000 ppm MTBE was degraded by 86.75% within 6 hours and 99.99% within 16 hours. The final pH value was 6.02. The degradation mechanism of MTBE by the Modified Photo-Fenton Reaction included two diverse pathways and tert-butyl formate (TBF) was identified to be the major degradation intermediate. Attributed to the high solubility, stability, and reactivity of the ferric-citrate complexes in the near neutral condition, this Modified Photo-Fenton reaction is a promising treatment process for high concentrations of MTBE under or near a neutral pH.

• Korean Journal of Environmental Agriculture
• /
• v.5 no.1
• /
• pp.48-54
• /
• 1986

Because of the drastic development of nuclear industries, the contamination of natural environments by the disposal of radioactive materials which are released from nuclear facilities have aroused a considerable concern in relation to agricultural practices. Therefore the present investigation, through pot experiment, was performed to find out the aspect of the uptake of $Sr^{90}$ by rice plants and its distribution in them in five different types(physicochemical and minerallogical properties) of paddy soils. The results obtained were as follows; 1) Visual toxic symptoms on the growth of rice plant due to treatment of $Sr^{90}$ up to $40{\mu}Ci/10㎏$ in a pot were not observed even though uptake of $Sr^{90}$ by rice plant was proportionally increased with the $Sr^{90}$ treatment. 2) Distribution of $Sr^{90}$ in the rice plant was the highest in the leaves (84.5%) followed in the order by stems (13.5%) and rough grain (2.0%). The ratio of $Sr^{90}$ to Ca was higher in the leaves (872) and stems (667) than in the rice grain (89). 3) $Sr^{90}$ absorption in the rice plant ranged $0.15{\sim}0.30%$ at harvesting time. Uptake of $Sr^{90}$ by rice plants decreased by the increase of soil pH and exchangeable canons in the soils, but $Sr^{90}$ uptake increased when nitrogen, organic matter and clay content in soil was high, and uptake of this nuclide in the rice plant was higher with low Illite and Vermiculite content in the soils.

• Korean Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.218-231
• /
• 2012

The objectives of this study were to evaluate the physico-chemical water quality, trophic and tolerance guilds in the control ($C_o$) and impacted streams of the abandoned mine, along with the ecological health, using a multimetric health model and physical habitat conditions of Qualitative Habitat Evaluation Index (QHEI), during the period of three years, 2005~2007. Also, eco-toxicity ($EE_t$) enclosure tests were conducted to examine the toxic effects on the outflows from the mine wastewater, using the sentinel species of Rhynchocypris oxycephalus, and we compared the biological responses of the control ($C_o$) and treatment (T) to the effluents through a Necropybased Health Assessment Index ($N_b$-HAI). Tissue impact analysis of the spleen, kidney, gill, liver, eyes, and fins were conducted in the controlled enclosure experiments (10 individuals). According to the comparisons of the control ($C_o$) vs. the treatment (T) in physicochemical water quality, outflows from the abandoned mine resulted in low pH of 3.2, strong acid wastewater, high ionic concentrations, based on an electrical conductivity, and high total dissolved solid (TDS). Physical habitat assessments, based on Qualitative Habitat Evaluation Index (QHEI) did not show any statistical differences (p>0.05) in the sampling sites, whereas, the $M_m$-EH model values in a multimetric ecological health ($M_m$-EH) model of the Index of Biological Integrity (IBI), using fish assemblages, were 16~20 (fair condition) in the control and all zero (0, poor condition) in the impacted sites of mine wastewater. In addition, in enclosure eco-toxicity ($EE_t$) tests, the model values of $N_b$-HAI ranged between 0 and 3 in the controls during the three years, indicating an excellent~good condition (Ex~G), and were >100 (range: 100~137) in the impacted sites, which indicates a poor condition (P). Under the circumstances, organ tissues, such as the liver, kidney, and gills were largely impaired, so that efficient water quality managements are required in the outflow area of the abandoned mine watershed.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.158-164
• /
• 2009

Biosorption uses adsorbents derived from non-living biomass and removes toxic metals from industrial wastewater. The objective of this research was to evaluate the potential of low cost biosorbents to remove heavy metal ions (Cd, Cu, Pb and Zn) from aqueous solutions using chemically modified rice husk and saw dust (Pseudotsuga menziesi, Quercus, Populus). Batch-type adsorption experiments were carried out using rice husk and saw dust treated with NaOH and/or tartaric acid in artificial wastewater 100 mg metal/L). The experimental results showed that the adsorption specificity of each biosorbent was Pb > Cu > Cd > Zn irrespective of the types of biosorbents. The adsorption capacity of Pb and Cu onto NaOH-treated sawdust was increased 2${\sim}$3 times compared to the untreated one. In addition, the tartaric acid treatment increased the adsorption capacity of rice husk for Zn and Cd approximately 5${\sim}$10 fold compared to the untreated one. Surface conditions and changes in functional groups by chemical modification of each biosorbent were confirmed by SEM and FT-IR. Overall, the results show that chemical modification increases the metal removal capacity of rice bran and sawdust.

• Journal of Aquaculture
• /
• v.6 no.4
• /
• pp.323-338
• /
• 1993

The primary objective of this study was to examine the toxic effects of PCP on activated sludge and to analyze its metabolic responses while treating wastewater containing pentachlorophenol (PCP) in a sequencing batch reactor (SBR) system operating under different control strategies. This study was conducted in two phases 1 and 2 (8-hr and 12-hr cycles). Each phase was operated with two control strategies I and II. Strategy I (reactor 1) involved rapid addition (5 minutes to complete) of substrate to the reactor with continuous mixing but no aeration for 2 hours. Strategy II (reactor 2) involved adding the feed continuously during the first 2 hours of the cycle when the system was mixed but not aerated. During both phases each reactor was operated at a sludge age of 15 days. The synthetic wastewater was used as a feed. The COD of the feed solution was about 380 mg/L. After the reference response for both reactors was established, the steady state response of each system was established for PCP feed concentrations of 0.1 mg/L, 1.0 mg/L, and 5.0 mg/L in SBR systems operating on both 8-hr and 12-hr cycles. Soluble COD removal was not inhibited at any feed PCP concentrations used. At 5.0 mg/L feed PCP concentration and in SBR systems operating on phase 2, the concentrations or ML VSS were decreased; selective pressure on the mixed biomass might be increased, narrowing the range of possible ecological responses; the settleability of activated sludge was poor; the SOURs were increased, showing that the systems were shocked. Nitrification was made to some extent at all concentrations of feed PCP in SBR systems operating on phase 2 whereas in SBR systems operating on phase 1 little nitrification was observed. Then, nitrification will be delayed as much as soluble COD removal is retarded due to PCP inhibition effects. Enhanced biological phosphorus removal occurring in the system operating with control strategy I during phase 1 of this work and in the presence of low concentrations of PCP was unreliable and might cease at anytime, whereas enhanced biological phosphorus removal occurring in the system operating with either control strategy I or II during phase 2 of this work and in the presence of feed PCP concentrations up to 1.0 mg/L was reliable. When, however, such processes were exposed to 5.0 mg/L PCP dose, enhanced phosphorus removal ceased and never returned.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.4
• /
• pp.339-348
• /
• 2010

Objective: To investigate the beneficial effect of fragment removal on the subsequent cell division and clinical outcome of the fragmented human embryos. Methods: A prospective study was performed in Hanna Women's Clinic and Mizmedi Hospital. Sixty couples undergoing In vitro fertilization-embryo transfer (IVF-ET) program were participated in the present study. The microsurgical fragment removal was performed in 106 fragmented embryos of 29 patients before the transfer. As a control group, 122 fragmented embryos of 31 patients were transferred without the fragment removal. Effects of fragment removal on morphological changes and clinical outcomes of fragmented embryos were investigated. Results: Mean morphological grade (G2.79) of fragmented embryos was significantly improved after the fragment removal(G1.63, p<0.001). Most of the fragmented embryos did not show a regeneration of fragments after the fragment removal during the subsequent development, and a beneficial effect of fragment removal on the development of the fragment removed embryos was observed. Implantation and pregnancy rates of fragment removed embryos were 12.3% and 31.3%, whereas the rates of control group embryos were 6.6% and 22.5%, respectively. There was no statistical significance in the rates between the two groups because of the low number of trials. Conclusion: Microsurgical fragment removal improved the subsequent development as well as the morphological grade of fragmented embryos. The fragment removal may be beneficial for neighboring blastomeres by repairing the intercellular communication and removing the secretion of the potential toxic materials by fragments.

• Clinical and Experimental Reproductive Medicine
• /
• v.37 no.4
• /
• pp.307-319
• /
• 2010

Objective: Vitrification requires a high concentration of cyroprotectant (CPA) and an elevated cooling speed to avoid ice crystal formation. We have evaluated the effect of different combinations of cooling rate and CPA on embryonic integrity (developmental competence) in order to increase the efficiency of vitrification without impairing embryo viabilit. We hypothesized that the combination of CPA or the increase of cooling rates can reduce the concentration of toxic CPA for vitrification. As consequently, we performed experiments to evaluate the effect of various composition of CPA or slush nitrogen ($SN_2$) on the mouse embryonic development following vitrification using low CPA concentration. Methods: Vitrification of mouse embryos was performed with EM grid using liquid nitrogen ($LN_2$) or $SN_2$ and different composition of CPAs, ethylene glycol (EG) and dimethylsulfoxide (DMSO). After vitrification-warming process, their survival and blastocyst formation rates were examined. For analyzing long-term effect, these blastocysts were transferred into the uterus of foster mothers. Results: Survival and blastocyst formation rates of vitrified embryos were higher in EG+DMSO group than those in EG only. Furthermor, the group using $SN_2$ with a lower CPA concentration showed a higher survival of embryos and developmental rates than group using $LN_2$. Conclusion: The combination of EG and DMSO as CPAs may enhance the survival of mouse embryos and further embryonic development after vitrification. $SN_2$ can generate high survival and developmental rate of vitrified/warmed mouse embryos when a lower concentration of CPA was applied. Therefore, these systems may contribute in the improvement of cryopreservation for fertility preservation.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.350-356
• /
• 2011

Environment-friendly agro-materials tend to be preferred to chemical insecticides recently. For this reason, many studies were conducted to develop environment-friendly insecticides containing natural materials. The purpose of this study was to assess ecotoxicity for 5 plant essential oils (Thyme white, Clove bud, Cassia, Lavender, Lemon eucalyptus) expected to prevent from pests and be used for agro-materials. Target species used to assess acute toxicity were aquatic invertebrate (Daphina magna), fish (Oryzias latipes), honeybee (Apis mellifera L.) and earthworm (Eisenia fetida). The EC50 value, toxicological responses of thyme white, clove bud, and cassia to Daphina magna were 2.5, 2.8, and $6.9mg\;L^{-1}$ respectively and these values were moderately toxic according to standard of USEPA. $EC_{50}$ of Lavender and lemon eucalyptus were >$10mg\;L^{-1}$ then they were considered as slightly toxicity. In case of acute toxicity test to fish, $LC_{50}$ of thyme white and cassia were 6.7 and $7.5mg\;L^{-1}$ each other. The other plant essential oils indicated $LC_{50}$ >$10mg\;L^{-1}$. Acute contact and oral toxicity test to Honeybee were conducted. As a result, $LD_{50}$ of all essential oils were >$100{\mu}g$ a.i. $bee^{-1}$ in both of tests. In case of acute toxicity test to earthworm, $LC_{50}$ of thyme white, clove bud, cassia, lavender, and lemon eucalyptus were 149, 230, 743, 234, and $635mg\;kg^{-1}$, respectively. In conclusion, if the safety for earthworm is confirmed, 5 plant essential oils are expected to be use for environment-friendly insecticide materials with low risk against ecosystem and contribute to developing environment-friendly agro-materials.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.2
• /
• pp.111-115
• /
• 2007

It is inevitable to use germicidal agents like parabens, imidazolidinyl urea, phenoxyethanol and chlorphenesin to preserve the cosmetics. Although effective in reducing microblological contamination, chemical preservatives are irritative, allergenic and even toxic to human skin. So it is needed to decrease or eliminate usage of preservatives in cosmetic products Glycerin, butylene glycol (BG), prorylene glycol (PG), and dipropylene glycol (DPG) are widely used in cosmetics as skin conditioning agent or solvents. At high concentrations, they have antimicrobial activities, but deteriorate product quality like sensory feeling or safety. The purpose of study is to evaluate the effects of polyols on antimicrobial and preservative efficacy and confirm whether using adjusted polyols can decrease the contents of preservatives without deterioration of the quality of cosmetics. Effects of common polyols on antimicrobial activities of general preservatives were measured. BG and PG significantly (p < 0.05) increased activities of preservatives, but glycerin influenced little. It was inferred from the regression analysis of the results with S. aureus that adding 1% of PG increased activities of preservatives up to $2.1{\sim}8.4 %$ and BG improved activities of preservatives up to $1.8{\sim}8.4 %$. The challenge test results for oil in water lotions and creams showed that BG and PG improved the efficacy of preservative systems up to 40 % at a range of $5.5{\sim}9.9 %$, but glycerin had little effect on it. The measured rates of improvement were analogous to the inferences from regression analysis. It can be concluded that is possible to reduce total chemical preservatives up to 40 %, consequently improve the safety and sensory quality of cosmetics with the precision control of polyols. Added to that, using this paradigm, low preservative contents, praraben-free system, and even preservative-free systems can be expected in the near future.