• Journal of Biosystems Engineering
• /
• v.17 no.3
• /
• pp.260-271
• /
• 1992

Fruits are generally subjected to mechanical forces during harvesting, handling, and transportation that may cause damage in the form of bruises, punctures, and cracks. In order to prevent damage, and insure better quality fruits for consumers, it is very essential to study physical properties of these materials. The studies were conducted to examine the effect of storage period, storage condition, and other factors, such as loading rate and initial strain, on the stress relaxation behavior of the fruit flesh, and develop nonlinear viscoelastic models to represent its stress relaxation behavior. The following results were obtained from the study : 1. Since the viscoelastic behavior of the fruits flesh was nonlinear, the behavior was satisfactorily modelled as follows ; $${\delta}({\varepsilon},\;t)={\varepsilon}^A[B\;{\exp}(-Ct)+D\;{\exp}(-Ft)+G(-Ht)]$$ But, for the every strain applied, the stress relaxation behavior of the fruit flesh, such as apple and pear, could be well described by the Generalized Maxwell model, respectively. 2. The effect of loading rate on the stress relaxation behavior was remarkable. The higher loading rate resulted in the higher initial stress, and the faster stress relaxation. 3. The higher initial strain resulted in the higher initial stress, and stress relaxed at the large initial strain was also much higher than at the small initial strain. 4. Stress relaxation rate and quantity stored in the fruits at the low temperature storage were much higher than those at the normal temperature storage in the same storage period. Also, in all fruits tested, the longer storage period was the more relaxation rate and quantity were shown. These trends in the normal temperature condition was the more significant than in the low temperature condition.

• KSBB Journal
• /
• v.29 no.5
• /
• pp.385-391
• /
• 2014

In this study, the emulsion dispersion stability of optimizing storage temperature was investigated. The system was based on oil/water (O/W) emulsions. In order to evaluate the stability, mean diameter of droplet was measured as a function of temperature with various mixed hydrophilic lipophilic balance (HLB). In addition, the correlations between phase inversion temperature (PIT) and the optimum storage temperature were probed. In this system, majority of the smallest droplet was shown at temperature of $20^{\circ}C$ below PIT. Whether the temperature was increased or decreased from the optimum, size of the droplet increased. According to the mixed HLB, the particle size and optimum storage temperature were also affected. As the concentrations of surfactant were increased, the size of particle decreased with lower optimum temperature for storage. If the surfactant (4 wt%) were mixed with HLB, the optimum storage temperature was $21^{\circ}C$ for maintaining the size of smallest droplet at 108.3 nm in diameter. At above optimum condition, increased size of particle was observed approximately 4 % increases from 108.2 nm to 112.3 nm after 600 hours. The size of particle in emulsion was maintained stably without any considerable effect of Ostwald ripening phenomena at the optimum storage temperature with low polydispersity index.

• Food Science and Preservation
• /
• v.4 no.2
• /
• pp.115-122
• /
• 1997

This experiment was hocused on the improvement of postharvest management of fresh shiitake to increase the marketing duration. the respiration rate of fresh shiitake at 2$0^{\circ}C$ was ranged from 395mg to 551mg CO2/kg/hr depending on the cultural condition. The rapid precooling is considered as one of the most important postharsvest management to remain shiitake quality. The optimum temperature for precooling and storage was -3$^{\circ}C$ because the occurrence of physical damage on frozen tissue at below -5$^{\circ}C$. Frozen storage at -3$^{\circ}C$ had benefits to minimize weight loss, browning induction at gill tissue and consumption of stored materials where as storage at $0^{\circ}C$ appeared not to be adequite for the extension of marking duration. Frozen shiitake was succesefully thawed when exposed to RH 40-50% at below 1$0^{\circ}C$.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.959-969
• /
• 2018

This study investigated the effects of deep freezing and storage temperature ($-50^{\circ}C$, $-60^{\circ}C$, and $-80^{\circ}C$) on the quality and freshness of lamb. To compare the qualities of deep frozen and stored lamb, fresh control and normal freezing conditions ($-18^{\circ}C$) were adopted. As quality and freshness parameters, drip loss (thawing loss and cooking loss), water-holding capacity (WHC), texture profile analysis (TPA), thiobarbituric acid reactive substances (TBARS), and total volatile basic nitrogen (TVBN) were evaluated during 5 months of storage. Temperature influenced the drip loss and WHC, and deep freezing minimized the moisture loss during frozen storage compared to the normal freezing condition. Lamb frozen and stored at deep freezing temperature showed better tenderness than that stored in normal freezing conditions. In particular, lamb frozen at lower than $-60^{\circ}C$ exhibited fresh lamb-like tenderness. Regardless of temperature, evidence of lipid oxidation was not found in any frozen lamb after 5 months, while TVBN was dependent on the applied temperature. Therefore, this study demonstrated that deep freezing could potentially be used to maintain freshness of lamb for 5 months. From the quality and economic aspects, the freezing and storage condition of $-60^{\circ}C$ is estimated as the optimum condition for frozen lamb.

• Journal of Korean Society on Water Environment
• /
• v.33 no.2
• /
• pp.187-196
• /
• 2017

To ensure hygienic safety of drinking water in a water storage tank, the concentrations of residual chlorine should be above a certain regulation level. In this study, we conducted model simulations to investigate the effects of temperature on residual chlorine in water storage tank conditions typically used in Seoul. For this, values of model parameters (decomposition rate constant, sorption coefficient, and evaporation mass transfer coefficient) were experimentally determined from laboratory experiments. The model simulations under continuous flow conditions showed that the residual chlorine concentrations were satisfied the water quality standard level (0.1 mg/L) at all the temperature conditions ($5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$, $20^{\circ}C$ and $25^{\circ}C$). Meanwhile, when the tanks had a no flow condition (i.e., no tap-water influent due to a sudden shut-down), the concentrations became lower than the regulatory level after certain periods. The findings from this modeling works simulating Seoul's water storage tanks suggested disappearance rate of residual chlorine could be reduced through the tanks design optimization with maintenance of low water temperature, minimization of air flow and volume, suppression of dispersion and the use of wall materials with low sorption ability.

• YAKHAK HOEJI
• /
• v.43 no.6
• /
• pp.793-797
• /
• 1999

Salmonella typhi Ty21a is an attenuated strain of S. typhimurium and used for oral typhoid vaccine. In an attempt to increase the stability of Ty21a manufacturing typhoid vaccine, we studied about the stability of freeze-dried Th21a including additives at various temperature conditions. In order to investigate the freeze-drying rate of Ty21a according to various absorbance, we lyophilized Ty21a by using 8% sucrose as a stabilizer. The optimal freeze-drying rate of Ty21a was appeared when OD (optical density) value of the growth was between 2.5 and 3.0. To investigate the stability of Ty21a at various temperature, the viability was measured after storaging the freeze-dried Ty21a at the room temperature, cold and freezing condition for 1 week. The viability of Ty21a in cold and freezing storage condition was 5 times more stable than in room temperature. To search the most stable additives for the freeze-dried Ty21a, the viability of Ty21a including additives at the various storage condition was estimated. Mannitol and loctose were the most stable additives. Theses results suggest that the OD value of Ty21a growth, low temperature, mannitol and lactose are important factors for the optimal freeze-drying rate, the stable storage and the most stable additives, respectively.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1418-1423
• /
• 2009

This study describes experimental study on the performance characteristics with load condition in hybrid solar heating system during spring season. The room temperatures, the hot water conditions and the lower part temperatures of heat storage tank were changed to analyze the system performances. As a results, the hot water was significantly affected by the ambient temperature. The indoor setting temperature affected the solar fraction. When the low part temperature of the storage tank increased, the temperature of the hot water rose and the temperature of the hot water in morning was affected by the ambient temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.225.1-225.1
• /
• 2010

Within recent years attention has been focused on the method of hydrogen storage using metal hydride reactor due to its high energy density, durability, safety and low operating pressure. In this paper, a numerical study is carried out to investigate the coupled heat and mass transfer process for absorption in a cylindrical metal hydride hydrogen storage reactor using a newly developed model. The simulation results demonstrate the evolution of temperature, equilibrium pressure, H/M atomic ratio and velocity distribution as time goes by. Initially, hydrogen is absorbed earlier from near the wall which sets the cooling boundary condition owing to that absorption process is exothermic reaction. Temperature increases rapidly in entire region at the beginning stage due to the initial low temperature and enough metal surface for hydrogen absorption. As time goes by, temperature decreases slowly from the wall region due to the better heat removal. Equilibrium pressure distribution appears similarly with temperature distribution for reasons of the function of temperature. This work provides a detailed insight into the mechanism and corresponding physicochemical phenomena in the reactor during the hydrogen absorption process.

• Food Science and Preservation
• /
• v.2 no.2
• /
• pp.243-249
• /
• 1995

Potatoes, Irish cobbler, were subject to quality evaluation from the physiological and physicochemical points of view during storage under different temperatures and relative humidities for 11 months. Quality criteria were sprouting, rotting, weight changes, moisture, total sugar, reducing sugar and vitamin C. Low temperature condition(LT, 2∼4$^{\circ}C$, 80% RH) was enough to preserve Potatoes for 11 months, but it was indicated to be limitations that the increase in reducig sugar as well as sprouting by about 3.3 to 6.7% occurred from the 3rd month of storage. Meanwhile, pit temperature(PT, 3∼15$^{\circ}C$, 75∼85% RH), room temperature(RT, 7∼17$^{\circ}C$, 80∼95% RH) and ambient temperature(AT, 2∼25$^{\circ}C$, 62∼72 RH) were shown infeasible conditions for the storage of potatoes mainly due to the increase In sprouting-rate and subsequent quality-loss after 3 months of storage. Based on the results, it proposed that more economical conditions, ranging 10 to 15$^{\circ}C$ and about 80% RH following sprout inhibition treatment should be used for the long-term storage of potatoes.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.69-69
• /
• 2017

Due to the lack in storage facility, considerable amount of rice is stocked in the open air, which causes increased stale flavor and deteriorates palatability and merchantable quality. Lipoxygenase-3(LOX-3) is involved in the production of volatile constituents in stored rice, and the development of stale flavor is delayed in LOX-3 null rice. LOX activity in the rice grain is localized in bran fraction and the tropical Japonica cultivar 'Dawdam' was reported that the absence of LOX-3 is inherited as a simple recessive trait. Also, it was reported that the peroxidation of unsaturated fatty acids occurs at lower levels in the 'Dawdam' bran fraction during storage than in rice varieties with LOX-3. This study was conducted to develop LOX-3 null rice lines using 'Dawdam' and investigate changes of physicochemical properties of the lines stored at different storage temperatures and periods. So we analyzed texture, toyo glossiness value, germination rate and lipoxygenase activity of 15 LOX-3 null rice lines on the condition of which rough rice had been stored at different temperatures (high temperature condition at $35^{\circ}C$ and low temperature condition at $15^{\circ}C$ for 4months. Hardness and stickiness of the lines tendered to be increased when it was stored at high temperature and adhesiveness, springiness, cohesiveness and chewiness was not considerably different according to storage temperatures and periods. The germination rate of HR29062-B-98-2-1-B among LOX-3 null rice lines was higher than another lines, 99.3, 94.0% after 4months stored at low temperature and high temperature, respectively. The lipoxygenase activity was 3,304, 1,601unit/mg protein after 4months stored at low temperature and high temperatures, respectively. So, it is thought that this line will be useful to breed rice varieties with high storability after tested on agricultural traits.