• 제목/요약/키워드: Low temperature decal

검색결과 4건 처리시간 0.019초

탄화수소계 전해질막과 저온 전사법을 이용한 DMFC용 MEA 제조 (Fabrication of Hydrocarbon Membrane based DMFC MEAs with Low Temperature Decal Method)

  • ;;하흥용;김수길
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2009년도 춘계학술대회 논문집
    • /
    • pp.415-417
    • /
    • 2009
  • A low temperature decal (LTD) transfer method is tried to fabricated hydrocarbon (HC) membrane based MEA. Sandwiched structures of outer ionomer/catalyst/carbon coating/substrate, which had been developed for Nafion membrane, are used for transfer of catalyst to the HC membrane. Performances of the HC MEA before and after 500hr continuous operation are compared and it is found that a severe delamination occurs at the interface between the HC membrane and the catalyst layer, which is the main reason of the low performance and its degradation. The delamination is due probably to the different nature of HC membrane to the Nafion ionomer. A substitutional method, therefore, is suggested to overcome this. In such a way, the outer ionomer process is removed and the low transfer rate of catalyst by skipping the ionomer process is compensated with optimization of other process variables such as transfer time or temperature. The resulting performance is superior to the original LTD method, which can be explained in terms of low resistive components both in ohmic and kinetic.

  • PDF

저온 전사법을 이용한 고성능 MEA 제조 (Fabrication of membrane electrode assemblies by low temperature decal methods)

  • 조재형;김장미;;황상엽;안동준;하흥용;김수길
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 추계학술대회 논문집
    • /
    • pp.37-39
    • /
    • 2008
  • 본 연구에서는 저온 데칼 전사법을 이용하여 막 전극 접합체(Membrane Electrode Assembly, MEA)를 제조하였다. 제조된 MEA는 직접 메탄올 연료 전지(Direct Methanol Fuel Cell, DMFC)를 이용하여 성능 테스트를 하였다. 저온 데칼 전사법은 $140^{\circ}C$의 낮은 온도에서 촉매 층을 데칼 기판에서 멤브레인으로 전사시키고, 전사된 촉매 층의 표면에 형성되는 것으로 알려진 이오노머 스킨 층의 형성을 막기 위해 이오노머/촉매/카본/기판의 구조로 되어 있는 데칼 기판을 사용한다. 저온 데칼 전사법으로 제조 된 카본 층이 있는 MEA의 DMFC 성능이 카본 층이 없이 데칼 전사법으로 제조된 MEA나 전통적인 고온 데칼 전사법으로 제조된 MEA, 또는 직접 스프레이 코팅법으로 제조된 MEA의 성능보다 높게 나온 것을 알 수 있다. 저온 데칼 전사법으로 제조된 MEA의 DMFC 성능이 향상된 것은 촉매 층 위에 이오노머 스킨이 형성되지 않아 반응물의 확산이 원활하게 이루어지기 때문이다. 이를 위한 특성 분석으로 EIS, CV를 측정하였다.

  • PDF

Fabrication of Pt-MWNT/Nafion Electrodes by Low-Temperature Decal Transfer Technique for Amperometric Hydrogen Detection

  • Rashid, Muhammad;Jun, Tae-Sun;Kim, Yong Shin
    • 전기화학회지
    • /
    • 제17권1호
    • /
    • pp.18-25
    • /
    • 2014
  • A Pt nanoparticle-decorated multiwall carbon nanotube (Pt-MWNT) electrode was prepared on Nafion by a hot-pressing at relatively low temperature. This electrode exhibited an intricate entangled, nanoporous structure as a result of gathering highly anisotropic Pt-MWNTs. Individual Pt nanoparticles were confirmed to have a polycrystalline face-centered cubic structure with an average crystal size of around 3.5 nm. From the cyclic voltammograms for hydrogen redox reactions, the Pt-MWNT electrode was found to have a similar electrochemical behavior to polycrystalline Pt, and a specific electrochemical surface area of $2170cm^2mg^{-1}$. Upon exposure to hydrogen analyte, the Pt-MWNT/Nafion electrode demon-strated a very high sensitivity of $3.60{\mu}A\;ppm^{-1}$ and an excellent linear response over the concentration range of 100-1000 ppm. Moreover, this electrode was also evaluated in terms of response and recovery times, reproducibility, and long-term stability. Obtained results revealed good sensing performance in hydrogen detection.

Electrochemical Characteristics of Solid Polymer Electrode Fabricated with Low IrO2 Loading for Water Electrolysis

  • Ban, Hee-Jung;Kim, Min Young;Kim, Dahye;Lim, Jinsub;Kim, Tae Won;Jeong, Chaehwan;Kim, Yoong-Ahm;Kim, Ho-Sung
    • Journal of Electrochemical Science and Technology
    • /
    • 제10권1호
    • /
    • pp.22-28
    • /
    • 2019
  • To maximize the oxygen evolution reaction (OER) in the electrolysis of water, nano-grade $IrO_2$ powder with a low specific surface was prepared as a catalyst for a solid polymer electrolyte (SPE) system, and a membrane electrode assembly (MEA) was prepared with a catalyst loading as low as $2mg\;cm^{-2}$ or less. The $IrO_2$ catalyst was composed of heterogeneous particles with particle sizes ranging from 20 to 70 nm, having a specific surface area of $3.8m^2g^{-1}$. The anode catalyst layer of about $5{\mu}m$ thickness was coated on the membrane (Nafion 117) for the MEA by the decal method. Scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) confirmed strong adhesion at the interface between the membrane and the catalyst electrode. Although the loading of the $IrO_2$ catalyst was as low as $1.1-1.7mg\;cm^{-2}$, the SPE cell delivered a voltage of 1.88-1.93 V at a current density of $1A\;cm^{-2}$ and operating temperature of $80^{\circ}C$. That is, it was observed that the over-potential of the cell for the oxygen evolution reaction (OER) decreased with increasing $IrO_2$ catalyst loading. The electrochemical stability of the MEA was investigated in the electrolysis of water at a current density of $1A\;cm^{-2}$ for a short time. A voltage of ~2.0 V was maintained without any remarkable deterioration of the MEA characteristics.