• Transactions on Electrical and Electronic Materials
• /
• 제18권1호
• /
• pp.46-50
• /
• 2017

The Zn1-xMnxO ($0.00{\leq}x{\leq}0.06$) samples have been synthesized in the form of powder by the coprecipitation method at low temperature using $Zn(CH_3COO)_2$. $2H_2O$ and $Mn(CH_3COO)_2$. $4H_2O$ powders, as well as HCl and $NH_4OH$ solutions as starting materials. Characterization was conducted using XRD, TEM, XRF, FTIR and VSM. The result shows that the $Zn_{(1-x)}Mn_xO$ ($0.00{\leq}x{\leq}0.06$) nanoparticles have the wurtzite phase with a hexagonal structure and particle sizes ranging from 17.48 to 118.83 nm. In a qualitative analysis of XRF, the peaks that confirm the existence of the manganese element in Mn-doped ZnO samples were observed. Meanwhile, FTIR test result shows that there are peaks at around $500cm^{-1}$ and $400cm^{-1}$ in the FTIR spectra for Mn doped ZnO samples which clearly reveal the existence of the (Zn, Mn)-O strain mode. The (Zn, Mn)-O absorption peak positions have shifted to a lower wave number with increasing Mn doping content. The peak intensity is also lower if compared to that of the ZnO sample without doping. From the VSM test, it is shown that $Zn_{(1-x)}Mn_xO$ ($0.00{\leq}x{\leq}0.06$) nanoparticles are all paramagnetic having monotonically increased susceptibility as increasing Mn content.

• 한국재료학회지
• /
• 제5권8호
• /
• pp.1045-1049
• /
• 1995

유기금속분해법(MOD, Metal Organic Decomposition)에 의하여 ITO 박막을 제조하고 SnO$_2$의 조성과 소성온도의 변화에 따른 박막의 특성변화를 고찰하였다. SnO$_2$의 양이 변하여도 ITO는 In$_2$O$_3$의 결정구조를 유지하고 있었으며, 이로부터 Sn이 In자리를 치환하여 고용체를 형성함을 알 수 있었다. SnO$_2$를 9wt.% 첨가 하였을때 비저항이 2.5$\times$$10^{-3}$$\Omega$-cm로 가장 낮은 값을 보였으며, 이는 타 연구자들의 결과치 보다 약 10배정도 큰 값이다. 이러한 비저항값의 차이는 작은 입경으로 인한 이동도의 감소 때문인 것으로 판단되었다. 투광도는 SnO$_2$의 첨가량 및 소성온도에 크게 의존하지 않았으며 가시영역에서 90% 이상을 보였다. 광흡수단으로부터 계산된 optical energy gap은 4.51-4.96eV 이었다.

• 한국작물학회지
• /
• 제15권
• /
• pp.115-121
• /
• 1974

본시험은 통일(IR 667) 벼의 적고현상의 원인이 근본적으로는 질소 비료의 부족과 토양내에 존재하는 뿌리의 호흡억제조건(예를 들면 저온, 배수불량 등) 이 질소 흡수를 저해시키는 결과라고 보고 적고현상의 본질을 더욱 구명하기 위하여 수행한 것이다. 수도품종 통일(수원 21004)과 풍광을 질소 비료와 호흡조지제에 대한 반응으로 나타나는 황화 또는 적고엽을 비교하였는데 대사 또는 호흡조지제로서는 2,4-dinitrophenol과 황화소다, 질소 급원으로서는 황산안몬을 사용했다. 본 시험의 결과를 요약하면 다음과 같다. 1. 통일벼는 재래종인 풍광에 비해서 질소에 보다 민감한 반응을 보였으며 이는 통일이 풍과에 비하여 다량의 질소를 요구하는 품종이며 질소의 결핍시는 통일은 엽록소형성이 저해되어 풍광은 그렇지 않는데 소위 적고현상을 일으켰다. 2. 특히 2,4-dinitrophenol과 황화소다와 같은 호흡조지제가 뿌리의 질소흡수에 미치는 영향은 통일벼가 풍광 보다 현저하였으며 통일의 경우 적고현상의 전제인 심한 황화현상이 나타났다. 3. 위의 두가지 사실을 미루어 보아 통일벼의 잎에 나타나는 적고현상은 질소비료의 공급 또는 흡수부족과 엽내의 질소성분부족으로 일어나는 품종자체의 특성에서 오는 현상이라고 말할수 있다.

• 한국식품위생안전성학회지
• /
• 제15권1호
• /
• pp.1-4
• /
• 2000

ESR spectroscopy를 이용하여 게류의 방사선 조사 유무와 선량관계 및 EAR신호의 안정성에 관하여 알아보았다. 꽃게와 방게를 0, 1, 3, 5, 그리고 7 kGy로 방사선을 조사한 후 살을 제거하고 집게다리, 등 일반다리의 겉 표피만을 취해 건조시킨 다음, Burker Win-EPR spectroscopy를 이용하여 신호의 특성을 알아보았다. 방사선 조사된 꽃게와 방게 시료는 g$_1$=2.002$\pm$0.0003, g$_2$=1.998$\pm$0.0005에서 특유의 비대칭 신호를 나타내어 비조사 시료와 뚜렷하게 구별되었으며, 각 시료의 부위별 비교는 꽃게와 방게에서는 똑같이 집게다리>등>일반다리의 순으로 신호의 차이가 나타났다. 조사선량의 증가에 따른 ESR 신호의 높이는 직선적으로 증가하였다. 또한 이들 신호의 크기는 5$^{\circ}C$에서 9주간의 저장기간에서도 안전하여 방사선 조사 유무의 판별은 장기간의 저장에서도 가능하였다 따라서 ESR spectroscopy를 이용한 방사선 조사 게류의 검지법은 빠르고 확실하며 준정량적인 방법임을 알 수 있었다.

• Korean Journal of Acupuncture
• /
• 제22권2호
• /
• pp.127-149
• /
• 2005

This study is designed to investigate the method of manufacturing herbal acupuncture through literature of oriental medicine. The findings of this study are as follows; 1. The methods of manufacturing herbal acupuncture go through the process of abstraction, purification, mixing, filtration, putting and tight sealing in the container, sterilization, quality control, printing and packing 2. There are many ways to manufacturing herbal acupuncture, for example water-alcohol precipitation, alcohol-water precipitation, liquid-liquid abstract, acid-base abstract, metal base precipitation, distillation, molecular structure, polyamide absorption, dialysis, and ion exchange, etc. And popular method is water-alcohol precipitation. This is through alcohol precipitate extracting the principal ingredients from water abstraction. This is very simple and efficient way using melting characteristics of compounds in herb to water and ethanol. 3. Sterilization of herbal acupuncture is through heating-pressure, boiling, steam flowing, low temperature, filtering, radiation, cooling, and microwaves. Nowadays filtering is commonly used. And sterilization is estimated by an examination of asepsis . 4. Herbal acupuncture must be undergo study and experiment to clinical use. The problems of herbal acupuncture are turbidity, instability, causing hemolysis, pain, and fever. So many provisions (addition, sterilization, and filtration etc.) must be prepared. 5. The theory of manufacturing herbal acupuncture is from oriental medicine, not western. So it must be corresponded to oriental medical theory, for example Gimi(氣味), Guigyung(歸經), Ingyung(引經), Bosa(補瀉), and Match of Herb. It is recommended that further study of many other sided investigations in the future.

• 설비공학논문집
• /
• 제17권9호
• /
• pp.808-815
• /
• 2005

A technical analysis was conducted to predict the development trends for heat pump system. This study was based on submitted patents from 1983 to 2002 in Korea, USA, and Japan. The total number of raw data from the registered database was 19,261 and the obtained data to be analyzed through the filtering process was 5,143. Japan's technical development for the heat pump system was more dominant than the other countries. Approximately $54\%$ of the total patents related with the heat pump system was registered by Japan. The number of patents for the heat pump system registered by Korea was very low in 1980's, but it increased rapidly in 1990's. As a result, the number of patents applied by Korea was $21\%$ of all patents. When the patent was categorized into compression, absorption/ad-sorption, and chemical type, the technology of compression type made up over $80\%$ in each country. Approximately $93\%$ of the patents surveyed in this study was developed for air or water source heat pumps because of easy applications compared with other heat sources. The $89\%$ of all patents was applied by companies when applicants were divided into three groups of company, individual, and the others (national institute, university, and so on).

• Transactions on Electrical and Electronic Materials
• /
• 제12권4호
• /
• pp.164-168
• /
• 2011

Nanocrystalline cadmium sulphide (CdS) thin films were prepared using chemical bath deposition (CBD), and the structural, optical and photoconductive properties were investigated. The crystal structure of CdS thin film was studied by X-ray diffraction. The crystallite size, dislocation density and lattice constant of CBD CdS thin films were investigated. The dislocation density of CdS thin films initially decreases with increasing film thickness, and it is nearly constant over the thickness of 2,500 ${\AA}$. The dislocation density decreases with increasing the crystallite size. The Urbach energies of CdS thin films are obtained by fitting the optical absorption coefficient. The optical band gap of CdS thin films increases and finally saturates with increasing the lattice constant. The Urbach energy and optical band gap of the 2,900 A-thick CdS thin film prepared for 60 minutes are 0.24 eV and 2.83 eV, respectively. The activation energies of the 2,900 ${\AA}$-thick CdS thin film at low and high temperature regions were 14 meV and 31 meV, respectively. It is considered that these activation energies correspond to donor levels associated with shallow traps or surface states of CdS thin film. Also, the value of ${\gamma}$ was obtained from the light transfer characteristic of CdS thin film. The value of ${\gamma}$ for the 2,900 A-thick CdS thin film was 1 at 10 V, and it saturates with increasing the applied voltage.

• 청정기술
• /
• 제20권4호
• /
• pp.367-374
• /
• 2014

0.1~1 M의 철킬레이트 화합물을 이용한 화학흡수반응에 의한 바이오가스내 황화수소제거를 위한 실험이 수행되었다. 철킬레이트 화합물을 이용한 황화수소제거는 철킬레이트의 최적산화반응을 통해 이루어진다. 바이오가스에 존재하는 황화수소는 킬레이트농도 및 pH 등의 공정조건에 따라 효과적으로 제거될 뿐만 아니라 철킬레이트 산화반응에 의해 황화수소내 존재하는 황성분을 생성시킨다. Fe-EDTA의 농도가 증가하면 철킬레이트 화합물의 착물이 안정되어 황생성의 전환이 증가하였다. 또한 철킬레이트화합물의 안정도는 pH에 따라 변하는 중요한 인자이고 pH 9에서 최적반응을 나타냈다.

• 한국수소및신에너지학회논문집
• /
• 제21권2호
• /
• pp.81-88
• /
• 2010

Hydrogen energy applications have recognized clean materials and high energy carrier. Accordingly, Hydrogen energy applies for fuel cell by Mg and Mg-based materials. Mg and Mg-based materials are lightweight and low cost materials with high hydrogen storage capacity. However, commercial applications of the Mg hydride are currently hinder by its high absorption/desorption temperature, and very slow reaction kinetics. Therefore one of the most methods to improve kinetics focused on addition transition metal oxide. Addition to transition metal oxide in $MgH_x$ powder produce $MgH_x$-metal oxide composition by mechanical alloy and it analyze XRD, EDS, TG/DSC, SEM, and PCT. This report considers kinetics by transition metal oxide rate and Hydrogen pressure. In this research, we can see behavior of hydriding/dehydriding profiles by addition catalyst (transition metal oxide). Results of PCI make a excellent showing $MgH_x$-5wt.% Sc2O3 at 623K, $MgH_x$-10wt.% $Sc_2O_3$ at 573K.

• 한국세라믹학회지
• /
• 제50권4호
• /
• pp.251-256
• /
• 2013

Multiwalled carbon nanotubes (MWCNTs) modified with Pd and $TiO_2$ composite catalysts were synthesized by the sol-gel method followed by solvothermal treatment at low temperature. The chemical composition and surface structure were characterized by X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Photocatalytic recycle degradation experiments were carried out under both UV and visible light irradiation in the presence of MWCNT/$TiO_2$ and Pd-MWCNT/$TiO_2$ composites. As expected, the nanosized Pd-MWCNT/$TiO_2$ photocatalysts had enhanced activity over the non Pd treated MWCNT/$TiO_2$ material in the degradation of a rhodamine B (Rh.B) solution. An increase in photocatalytic activity was observed and attributed to an increase in the photo-absorption effect by MWCNTs and the cooperative effect of Pd and $TiO_2$ nanoparticles. According to the recycled results, the as-prepared Pd-MWCNT/$TiO_2$ sample had a good effect on it.