• 대한조선학회논문집
• /
• 제38권1호
• /
• pp.43-51
• /
• 2001

본 연구는 랜킨소오스법과 저차 패널법을 이용하여 파랑 중 선박의 비정상 문제를 해석하였다. 기본유동을 균일 입사 유동(소위 Kelvin 유동)과 이중모형 유동의 두 가지로 가정하여 지배방정식과 경계조건을 만족하는 해를 구하고 비교하였다. 수정 Wigley 선형과 Series 60($C_B=0.7$) 선형에 대해 동유체력을 계산하여 실험 값 및 기존의 계산 값과 비교하였다. 이중모형에 의한 계산 값이 균일 입사 유동에 의한 계산 값보다 실험 치에 보다 더 가까운 결과를 보였다.

• 유통과학연구
• /
• 제14권4호
• /
• pp.33-38
• /
• 2016

Purpose - This study purposes to analyze the impact of regional economic integration and macroeconomic on Indonesian FDI inflows. Research design, data, and methodology - Data were collected from bilateral relation between Indonesia and 21 home countries whose dominant share FDI to Indonesia from 2005 to 2013. Analysis method was conducted by panel gravity modeI to find the impact of regional economic integration and macroeconomic on Indonesian FDI inflows. Results - The empirical results show that GDP of the home country and Indonesia have a positive impact on Indonesia FDI. Distance and home country real interest rate have a negative impact on Indonesia FDI. Economic integration of European Union (EU) and Indonesia's cooperation with Japan in ASEAN-Japan Comprehensive Economic Partnership (AJCEP) have created impact of investment creation on Indonesia FDI, unfortunately, economic integration of ASEAN has created impact of investment diversion on Indonesian FDI. Conclusions - In order to increase FDI inflow to Indonesia, Indonesia government should improve the physical and social infrastructures to drive the productivity and economic efficiency. It will increase the GDP and also attract more investors. Low interest rate policy should be considered.

• 대한조선학회논문집
• /
• 제33권3호
• /
• pp.35-47
• /
• 1996

포텐셜을 기저로 하는 판요소법을 사용하여 자유 표면이 존재하는 유동장에서 일정 속도로 전진하는 3차원 물체의 형상을 설계하였다. 설계 방법으로는 원하는 압력 분포를 경계 조건으로 부여하고 이를 만족하는 물체 형상을 찾아내는 역해석법(inverse method)을 사용하였다. 즉, 주어진 압력으로부터 물체 표면에 분포된 법선 다이폴의 세기인 포텐셜 값을 결정하게 되며, 이는 물체 표면에 대한 Dirichlet형태의 경계 조건으로서 Green의 정리로부터 유도된 적분 방정식을 해석하게 된다. 전체 속도 포텐셜은 기본 유동인 선속에 대한 성분과 선제에 의하여 교란되는 성분으로 구성되어진다고 가정하였으며, 교란 포텐셜을 사용하여 선형화된 자유 표면 경계 조건을 적용하였다. 적분 방정식에 대한 수치 해석을 위해 물체 표면에 법선 다이폴과 Rankine 쏘오스를 분포하였으며, 자유 표면에는 Rankine 쏘오스를 분포하고 4점 유한 차분법을 사용하여 자유 표면 경계 조건이 만족되도록 하였다. 해로서 얻어지는 각 판요소에서의 Rankine 쏘오스의 세기는 가상의 유동 출입량으로서 형상 수정항으로 사용되었다. 몰수 회전 타원체의 형상 설계에 대하여 본 설계법을 적용한 결과 무한 수심에서나 조파 상태에서 $4{\sim}6$회의 반복 계산으로 충분히 수렴된 해를 얻을 수 있었다. 또한 자유 표면을 가르고 전진하는 Wigley 수학적 선형에 대한 형상 설계를 수행하여 만족스러운 결과를 얻어내었으며, 얻어진 수치해는 매우 안정적이고 빠른 수렴성을 보였다. 선형의 우열 비교를 통해 조파 저항을 감소시킬 수 있는 압력 분포의 형태를 파악하였으며, 이를 바탕으로 조파 저항의 관점에서의 5500TEU급 콘테이너 운반선의 설계를 수행하였다. 설계되어진 새로운 선형은 조파 저항의 관점에서 기존의 선형보다 계산과 실험에서 모두 우수하게 개량된 것으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.552-555
• /
• 2002

In order to achieve higher performance and low cost a-Si TFT-LCD panel, new material architecture and its process integration for a-Si TFT array manufacturing method were developed. Material combination of low resistant dry-etchable metal and new pixel electrode under currently adopted 4 mask process made it possible to get more-simplified manufacturing method and better device performance for the a-Si TFT-LCD application. Proposed 4 mask process architecture with optimized wet etchants and dry etching process was applicable to various devices such as notebook, monitor and TV.

• 대한조선학회논문집
• /
• 제50권1호
• /
• pp.1-7
• /
• 2013

The high-skewed and/or composite propellers of current interests to reduce the ship vibration and to increase the acoustic performance are likely to be exposed to the unexpected structural problems. One typical example is that the added mass effect on the propellers working in the non-uniform wake field reduces the natural frequency of the propeller leading to the resonance with the low-frequency excitation of the external forces. To avoid this resonance problem during the design stage, the technique of fluid-structure interaction has been developed, but the higher-order effect of the blade geometry deformation is not yet considered in evaluating the added mass effects. In this paper the fluid boundary-value problem is formulated by the potential-based panel method in the inviscid fluid region with the velocity inflow due to the body deformation, and the structural response of the solid body under the hydrodynamic loading is solved by applying the finite element method which implements the 20-node iso-parametric element model. The fluid-structure problem is solved iteratively. A basic fluid-sturcture interaction study is performed with the simple rectangular plates of thin thickness with various planform submerged in the water of infinite extent. The computations show good correlation with the experimental results of Linholm, et al. (1965).

• 열처리공학회지
• /
• 제19권4호
• /
• pp.219-224
• /
• 2006

Silver paste with low sintered temperature has been developed in order to apply electronic parts, such as bus electrode, address electrode in PDP (Plasma Display Panel) with large screen area. In this study, nano-sized silver particles with 10-30 nm were synthesized from silver nitrate ($AgNO_3$) solution by chemical reduction method and silver paste with low sintered temperature was prepared by mixing silver nanoparticles, conventional silver powder with the particle size 1.6 um and Pb-free frit. Conductive thick film from silver paste was fabricated by screen printing on alumina substrate. After firing at $540^{\circ}C$, the cross section and surface morphology of the thick films were analyzed by FE-SEM. Also, the sheet resistivity of the fired thick films was measured using the four-point technique.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.15.2-15.2
• /
• 2009

Manufacturing of printed electronics using printing technology has begun to get into the hot issue in many ways due to the low cost effectiveness to existing semi-conductor process. This technology with both low cost and high productivity, can be applied in the production of organic thin film transistor (OTFT), solar cell, radio frequency identification (RFID) tag, printed battery, E-paper, touch screen panel, black matrix for liquid crystal display (LCD), flexible display, and so forth. The emerging technology to manufacture the products in mass production is roll-to-roll printing technology which is a manufacturing method by printings of multi-layered patterns composed of semi-conductive, dielectric and conductive layers. In contrary to the conventional printing machines in which printing precision is about $50~100{\mu}m$, the printing machines for printed electronics should have a precision under $30{\mu}m$. In general, in order to implement printed electronics, narrow width and gap printing, register of multi-layer printing by several printing units, and printing accuracy of under $30{\mu}m$ are all required. We developed the roll-to-roll printing equipment used for printed electronics, which is composed of un-winder, re-winder, tension measurement system, feeding units, dancer systems, guide unit, printing unit, vision system, dryer units, and various auxiliary devices. The equipment is designed based on cantilever type in which all rollers except printing ones have cantilever types, which could give more accurate machine precision as well as convenience for changing rollers and observing the process.

• 천문학논총
• /
• 제12권1호
• /
• pp.159-165
• /
• 1997

In order to reduce the small scale fluctuation resulting from shearing holograpy(Park et. al. 1997), differential panel adjustments were performed for 14 m radio telescope of Taeduk Radio Astronomy Observatory with T2 theodolite It appears that this method improves the surface accuracy by about $50\;{\mu}m$. The measured surface accuracy is, at best, $170\;{\mu}m$. The beam efficiency at 86.2 GHz is estimated to be 44% We also found that the elevation at which Park et. al. performed holography was too low.

• 오토저널
• /
• 제10권2호
• /
• pp.61-69
• /
• 1988

The finite-difference three-dimensional boundary layer procedure of Chang and Patel is modified and applied to solve the boundary layer development on the automobile surface. The inviscid pressure distribution needed to solve the boundary layer equations is obtained by using a low order panel method. The plane of symmetry boundary layer exhibits the strong streamline divergence up to the midbody and convergence thereafter. The streamline divergence in front of the windshield helps the boundary layer to overcome the sever adverse pressure gradient and avoid the separation. The relaxation of the pressure right after the top of the wind-shield, on the other hand, makes the overly thinned boundary layer to readjust and prompts the streamlines to converge into the symmetry plane before the external streamlines do. The three-dimensional characteristics are less apparent after the midbody and the boundary layer is similar to that of the two-dimensional flow. The results of the off-plane-of-symmetry boundary layer are also presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.147-150
• /
• 1998

Since P-ELD(powders type electroluminescent device) phenomena were found by G.Destriau at first In 1936, lots of studying was performed in order to realize surface emission devices and flat panel display as a backlight. Due to the problem of low luminance and color and so on, it was delayed. Recently using electric field and thermal effect which can change it\`s molecular arrangement, it can be developed using photoelectric properties of P-ELD. P-ELD in this study was prepared by casting method. Basic structure is ITO/Phosphor/insulator/Al sheet, each layer was mixed by binder, which concentration 11p(poise) for phosphor, 8p(poise) fort insulator. Dielectric properties was investigated first and emission properties of P-ELD based on ZnS:Mn,Cu/ZnS:Cu,Br mixture. P-ELD prepared in this work exhibits about 100cd/㎡ 1-kHz simusoidal excitation.