• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.196-197
• /
• 2013

친환경 차량의 필수장치로 사용되는 OBC(On Board Charger) 및 LDC(Low DC-DC Converter)는 시스템 성능은 물론 하드웨어적인 신뢰성과 더불어 차량에서 발생할 수 있는 다양한 Fault로부터 차량과 운전자를 보호할 수 있는 안정성과 신뢰성을 확보하는 것이 요구된다. OBC/LDC 개발에 있어 시제품을 제작하여 성능 검증과 하드웨어 신뢰성을 확보하는 것은 현재의 개발 프로세서로 충분하지만 차량에서 발생하는 다양한 Fault 상황에 대한 강건성 확보는 실차에 탑재하여 검증하지 않고서는 뚜렷한 검증 방법이 없는 실정이다. 이에 따라 본 논문에서는 차량에서 발생될 수 있는 다양한 Fault 상황을 시뮬레이터로 모사하여, 이러한 Fault를 전력변환장치에 인위적으로 주입시킨 뒤 전력변환장치가 정상적으로 동작하는지 분석한다. 이를 통해 실차에 탑재하지 않고 전력변환시스템의 신뢰성을 검증하기 위한 방안을 제시한다.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.6
• /
• pp.48-59
• /
• 1992

This study is on the performance of the perforated tube muffler when it operates as an exhaust silencer with through-flow, steady or pulsating. Theoretical estimation of the insertion loss was made by means of transfer matrix and by using the impedance equation for the perforated tube obtained for the case of low-speed steady through-flow. Experiment was performed for the measurement of the insertion loss at two flow conditions. The one is a steady flow from the exhaust pipe of an idling diesel engine. The effect of the through-flow velocity and steadiness on the muffler performance was obtained. By comparing the theoretical prediction with the experimental result, the validity of the impedance equation in the theoretical model was discussed. It has been found that steadiness as well as magnitude of the through-flow has a significant effect on the performance of the perforated tube muffler. Especially, the self-noise due to the pulsating flow in the engine exhaust system must be taken into account for the prediction of the muffler performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.468-472
• /
• 2005

This paper is to investigate the influence of the endface quality on the loss characteristics of a plastic optical fiber connector for in-car network service. Using the parameters of the surface roughness and applied load, insertion loss of connector is measured. Due to scattering and change of refractive index, an optimal condition for low-loss coupling exists. We present the optimal condition as surface roughness $R_{rms}$ = 8 nm and contact load up to 50 N.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.809-812
• /
• 2002

This paper presents the structures for a CPW shunt RF switch using MEMS(Micro Electro Mechanical System). Recent development in MEMS technology has made the design and fabrication of micro-mechanical switches as new switching elements. The micro-mechanical switches have low insertion loss, negligible power consumption, and good isolation compared to semiconductor switches. The fabricated structure shows an insertion loss of 2dB at 20GHz When a bias voltages of 12V is apply.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.524-527
• /
• 2002

An improved mathematical/kinetic model is proposed to describe receptor-mediated uptake and its degradation of LDL on human fibroblasts. The hierarchy of kinetic models is presented, which leads to the model introducing the parameter of degree of preferential insertion of recy치ed receptors to the surface of cell membrane. The results of its prediction were presented in various types of experimental and in various LDL concentrations. Its ability to predict Brown and Goldstein’s ample experimental data was excellent.

• Korean Journal of Bronchoesophagology
• /
• v.4 no.2
• /
• pp.177-181
• /
• 1998

Provox is now widely used for voice rehabilitation for total laryngectomized patient because of its low airway resistance and easiness for phonation. This study was designed to reveal the influence of radiation therapy on Proven complications. Forty-four patients who underwent total laryngectomy were grouped into group A (no radiation), group B(radiation and then Provox insertion), group C(Proven insertion and then radiation). Provox complications were leakage, granulation tissue formation, malfunction and infection. The average survival time of Provox was longer in group C (9.2 me) than group A(8.6 m) or group B (7.3 me), but no statistical significance was found. The first time of Provox change was 10.2, 8.6 and 9.7 months respectively. The incidence of complication was not significantly different among groups. The cases of Provox remeval due to shunt failure were 5, 4 and 2 respectively. Even though a significant statistically difference was not found partialy due to the small numbers of patients, a special caution should be exercised in inserting Provox to prevent a serious complication for the patients who had a history of previous radiation.

• Journal of electromagnetic engineering and science
• /
• v.17 no.1
• /
• pp.34-38
• /
• 2017

In this paper, we propose an active tunable bandpass filter (BPF) for efficient spectrum sensing in the TV White Space (TVWS) band. By designing a narrow bandwidth, it is possible to improve the sensing probability. The basic circuit configuration involves switching the PIN diode compromising capacitor bank to change the capacitance of the LC resonant circuit. To cover the whole TVWS band effectively, we add a varactor diode, and the bandwidth is set to 25-MHz. We improve the insertion loss by using the active capacitance circuit. The tunable BPF in the TVWS band with a 20-MHz interval is designed to have 11 channels with a bandwidth of 25 MHz and a low insertion loss of 1.7-2.0 dB.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.3
• /
• pp.132-138
• /
• 2005

In this paper a DPDT(Double-Pole Double Through) switch with defected ground structure(DGS) is proposed. The equivalent circuit for the proposed switch structure is derived according to based on equivalent circuit of proposed DGS unit structure. The equivalent circuit parameters of DGS unit are extracted by using the circuit analysis method. The on/off operation of the proposed switch is obtained by varying the capacitance of the varactor diode at the defected ground plane. In the case of ON state, the insertion loss of the fabricated DPDT was shown under 1dB. And in OFF state, we found the rejection characteristic over 20dB at the designed frequency 2.45GHz. The experimental results show excellent insertion loss at on state and isolation at off state.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.47-52
• /
• 2011

In this paper, to evaluate the design properties of 3D optical multimode interference (MMI) couplers with ultracompact width, modal transmission line theory and effective dielectric method are combined with together. A coupling efficiency based on the composed approach is defined, and the coupling length is numerically determined for the design of 3 dB coupler, cross coupler and bar coupler. The simulation result shows that the designed MMI coupler has a low insertion loss and a high splitting ratio.

• Vacuum Magazine
• /
• v.2 no.2
• /
• pp.12-16
• /
• 2015

Organic photovoltaics (OPVs) have attracted significant interest in an interdisciplinary research field for the decades as a next-generation photovoltaic device due to their unique advantages. One of requirements for OPVs having high power conversion efficiency is the favorable energy level alignment between the electrode/organic and organic/organic interfaces to manage the exciton dissociation and improve the charge transport. In this review, strategies to enhance the OPV performance by controlling the energy level alignment are discussed. The insertion of an exciton blocking layer leads to the efficient dissociation of photogenerated excitons at the donor/acceptor interface enhancing the short-circuit current density. The choice of a donor having a high ionization energy and an acceptor having a low electron affinity increases the open-circuit voltage. The insertion of an appropriate work function modifier which reduces the charge injection barrier removes the S-kink in current density-voltage characteristics of OPVs and improves the fill factor. This review would give a valuable guide to design the efficient OPV structure.