• ETRI Journal
• /
• v.27 no.1
• /
• pp.89-94
• /
• 2005

This paper describes a low-loss, compact, 40-channel arrayed waveguide grating (AWG) which utilizes a monolithically integrated spot-size converter (SSC) for lowering the coupling loss between silica waveguides and standard single-mode fibers. The SSC is a simple waveguide structure that is tapered in both the vertical and horizontal directions. The vertically tapered structure was realized using a shadow-mask etching technique. By employing this technique, the fabricated, 40-channel, 100 GHz-spaced AWG with silica waveguides of 1.5% relative index-contrast showed an insertion-loss figure of 2.8 dB without degrading other optical performance.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.131-134
• /
• 2005

Recently, RF systems have rapidly grown with the extension of the mobile communication service The mobile service companies are providing the satellite broadcasting and common usage are expected. Coinciding with current trend, the development of improved satellite DMB (Digital Multimedia Broadcasting) tuner is required. To improve the receiving sensitivity under the poor communication circumstance, It is necessary to design the LNA (Low Noise Amplifier) with outstanding low noise characteristic and the BPF (Bandpass Filter) to transmit only desired signal without distortion and loss. Besides high reliability, the miniaturization and lightweight are required for design of mobile terminals. In this study, we designed and fabricated DMB SIR-type BPF which operates at 2642 MHz and is embedded in the substrate using LTCC. As a result, we obtained the passband insertion loss of 2.4 dB and the passband ripple of 0.08 dB. So this DMB SIR-type BPF is applicable to RF module of a satellite DMB tuner.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.147-150
• /
• 2005

Low actuation voltage and no contact stiction are the important factors to apply MEMS RF switches to mobile devices. Conventional electrostatic MEMS RF switches require several tens of voltages for actuation. In this paper we propose PAS MEMS RF switch which adopt PZT actuators and seesaw cantilevers to meet the above requirements. The fundamental structures of PAS MEMS switch were designed, optimized, and fabricated. Through the developed processes PAS SPDT MEMS RF switches were successfully fabricated on 4" wafers and they showed good electrical properties. The driving voltage was less than 5 volts. And the insertion loss was -0.5dB and the isolation was 35dB at 5GHz. The switching speed was about 5kHz. So these MEMS RF switches can be applicable to mobile communication devices or wireless multi-media devices at lower than 6GHz.

• Journal of the Korean Ceramic Society
• /
• v.43 no.2 s.285
• /
• pp.74-78
• /
• 2006

A non-integrated type noise filter on a Coplanar Waveguide (CPW) transmission line is demonstrated by using a highly resistive $Co_{41}Fe_{38}Al_{13}O_8$ nanogranular thin film with the dimensions of $4\;mm (\iota)\times4\;mm(\omega)\times0.1\;{\mu}m(t)$. The noise suppression characteristics are evaluated without placing an insulating layer between the CPW line and the magnetic thin film. The insertion loss is very low being less than 0.3 dB and this low value is maintained up to 2 GHz. At a ferromagnetic resonance frequency of 3.3 GHz, the power loss is very large and the degree of noise attenuation is measured to be 3 dB. This level of noise attenuation is still small for real applications; however, considering the small magnetic volume used in this work, further improvement is expected by simply increasing the magnetic volume and by integrating the magnetic thin film into the CPW transmission line.

• Journal of Families and Better Life
• /
• v.26 no.4
• /
• pp.41-54
• /
• 2008

The purpose of this study was to investigate predictors concerning preschoolers' ability to read words, in terms of their sub-skills of alphabet knowledge, phonological awareness, and phonological processing. Fourteen literacy sub-tests and three types of reading tasks were administered to 289 kindergartners aged 4 to 6 in Busan. The main results are as follows. Sub-skills that predicted reading ability varied with children's age. Irrespective of children's age groups, knowledge of consonant names and digit naming speed commonly explained the reading of real words. In contrast, skills of syllable deletion and phoneme substitution and knowledge of alphabet composition principles were related to only 4-year-olds' reading skills. Exclusively included was digit memory in predicting 5-year-olds' reading abilities, and knowledge of vowel sounds in 6-year-olds' reading skills. The type of reading task also influenced reading ability. A few common variables such as knowledge of consonant names and vowel sounds, digit naming speed, and phoneme substitution skill explained all types of word reading. Syllable counting skills, however, had predictive value only for the reading of real words. Phoneme insertion skills and digit memory had predictive value for the reading of pseudo words and low frequency letters. Likewise, knowledge of consonant sounds and vowel stroke-adding principles were significant only for the reading of low frequency letters.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.248-253
• /
• 2016

Two substrate integrated waveguide (SIW)-based antennas for the application of software-defined radar are proposed and investigated herein. It is usually well known that SIWs are easily integrated, lightweight, have low insertion loss, and low interference levels compared to conventional microstrip structures. The primary function of the proposed antennas is to transmit continuous waves for indoor motion detection, with the lowest amount of loss and an appropriate amount of gain. Moreover, the results of this study show that the size of the antenna can be reduced significantly (i.e., by about 40%) by applying a meander line structure. The operating frequencies of the proposed antennas are both within the industrial, scientific, and medical band (i.e., 2.4-2.4835 GHz). Measured results of return loss are -16 dB and -20 dB at 2.435 GHz and 2.43 GHz, respectively, and the measured gain is 8.2 dBi and 5.5 dBi, respectively. Antenna design and verification are undertaken through commercially available full electromagnetic software.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.1
• /
• pp.63-76
• /
• 1996

In this paper, we propose a new dynamic spatial index structure, called PR -file, for handling spatial objects and the modified hierarchical variance which measures the degree of spatial locality at each level. Under the assumption that a multidimensional search space has a circular domain, PR-file uses the modified hierarchical variance for clustering spatially adjacent objects. The insertion and splitting algorithms of PR_file preserve and index which has a low hierarchical variance regardless of object distributions. The simulation result shows that PR- file has a high hit ratio during a retrieval of objects by using an index with low hierarchical variance. And it shows a characteristic that the larger the bucket capacity, the higher the bucket utilization.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1929_1930
• /
• 2009

Fully embedded tunable bandpass filter (BPF) with inductive coupling circuits is newly designed and demonstrated for UHF TV tuner ranged from 500MHz to 900MHz receivers. Conventional RF tuning circuit with an electromagnetic coupled tunable filter has several problems such as large size, high volume, and high cost, since the electromagnetic coupled filter is comprised of several passive components and air core inductors to be assembled and controlled manually. To address these obstacles, compact tunable filter with inductive coupling circuit was embedded into low cost organic package substrate. The embedded filter was optimally designed to have high performance by using high Q spiral stacked inductors, high dielectric $BaTiO_3$ composite MIM capacitors, varactor diodes. It exhibited low insertion loss of approximately -2dB, high return loss of below -10dB, and large tuning range of 56.3%. It has an extremely compact size of $3.4{\times}4.4{\times}0.5mm^3$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.563-568
• /
• 2003

In this paper, a miniaturized parallel coupled bandpass filter using multi-layered LTCC(Low Temperature Co-fired Ceramics) substrate for SOP(System-On-Package) is proposed for applications to wireless communication systems. The fabricated BPF is composed of five 106${\mu}{\textrm}{m}$ thick LTCC layers and its size is 5.24mm x 4.3mm x 0.53 mm. The measured characteristics of the BPF show the center frequency of 5.8GHz, bandwidth of 200MHz, insertion loss of 2.326dB and return loss of 13.679dB. In addition, the attenuation is 28.052dB at 4.7GHz.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.4
• /
• pp.15-21
• /
• 2005

Use of a glove made of materials with a low elasticity decreases the performance of the hand such as agility, dexterity, range of motion, and grip strength. The present study examined if the adverse effects of a low-elastic glove can be reduced by a design which accommodates the changes of hand surface lengths by hand motion. Two glove designs which provide patches of elastic cloth and pleats at the finger joints and knuckle were developed by considering the hand surface length changes, and then compared with two conditions(bare hand and conventional glove design that does not consider the dynamic characteristics of the hand dimensions) in terms of completion time in peg board insertion task, maximum grip strength, discomfort in hand motion, discomfort in force exertion, and overall discomfort by 24 right-handed participants. The test results confirmed that wearing of a glove significantly reduced the agility and grip strength capability of the hand and indicated that the novel designs were effective to lessen the performance decreases compared to the conventional design. Also, of the glove designs, the pleat glove design was found most preferred for both better hand performance and less subjective discomfort.