• Health Policy and Management
• /
• v.9 no.4
• /
• pp.87-119
• /
• 1999

The main purpose of this research is to measure and analyze how productive the health centers are and how much inputs(or outputs) in the inefficient health centers should be decreased(or increased) for efficiency. The evaluation of the performance of health centers gives a strong incentive to improve resource allocation in regional health planning. It has been, however, implemented very rarely until now. In this regard, this paper measures the performance of the health centers with a single indicator for multiple-outputs in terms of productivity(technical efficiency), based on Data Envelopment method. The 20 Kyungnam health centers which provide clinic services and specific primary health care services were analyzed. The results show that 50.0% of 20 health centers were productive with respective to overall technical efficiency, 65.0% were productive for pure technical efficiency, and 50.0% for scale efficiency. The inefficient group includes Geoje, Mahsan, Miryang, Sahchun, Tongyoung, Gosung, Nahmhae, Euryang, Hahmahn, Hahbchun health centers. The worst case was identified as Tongyoung health center which represented a 47.5% efficiency, compared with productive health centers. The empirical results for input-output analysis indicates that the low-productive health centers have excessive manpower in administration department, producing low outputs in clinical services and vaccination program. These findings imply that a systemic evaluation of the performance of the Korean health centers and the subsequent structural reform are strongly required.

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.676-685
• /
• 2012

As impermeable layer continues to increase with the urbanization process, direct input of nonpoint source pollutants into water bodies via stormwater has caused serious effects on the aquatic ecosystem. Potential applications of rain gardens are increasing not only as best management practices (BMP) for reducing the level of nonpoint source pollutants but also as an ecological engineering alternative for low impact development (LID). In this study, remediation performance of various planting types, such as a mixed planting system with shrubs and herbaceous plants, was assessed quantitatively to effectively manage stormwater and increase landscape applicability. The mixed planting system with Rhododendron lateritium and Zoysia japonica showed the highest removal performance of $76.9{\pm}7.6%$ and $58.4{\pm}5.0%$ for total nitrogen and $89.9{\pm}7.9%$ and $82.4{\pm}5.2%$ for total phosphorus at rainfall intensities of 2.5 mm/h and 5.0 mm/h, respectively. The mixed planting system also showed the highest removal performance for heavy metals. The results suggest that a rain garden with the mixed planting system has high potential applicability as a natural reduction system for nonpoint source pollutants in order to manage stormwater with low concentrations of pollutants and will increase water recycling in urban areas.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.201-207
• /
• 2020

With the expansion in the use of DC power systems and increased need for system maintenance, the development of measurement devices for maintenance requires high stability. Of the different kinds of DC current measurement devices, the single-shot measurement device causes the input signal of the current measuring unit to initially generate a high inrush current. The high inrush current flows into the signal processor of the meter, shortening the life of the internal fuses and causing failure. Therefore, in this study, the I²t value for increasing the durability of the fuse is designed using the available wire diameter. Operating characteristics for 210~400% over-current of the rated current, which is relatively low over-current, are realized by the plating of low melting tin metal. As a result, a method of designing a fuse element for a DC power supply, which improves the safety of the DC current measurement device by blocking the failure caused by the inrush current, is presented.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.127-141
• /
• 1996

In this paper, we propose a 7-phase life cycle model which applies to Computer Integrated Manufacturing systems. The model emphasizes product design and manufacturing design activities of CIM to secure the critical success factors of CIM systems such as high quality, adaptability, productivity, and flexibility. It is argued that the product design aspect would be divided into three phases-conceptual design, embodiment design, and detialed design. The conceptual design phase is to build a conceptual model of the product based on requirements and specifications which reflect "the voice of the customer". THe embodiment design phase utilizes specific design tools such as DFM, CAE, and CAD, and results in a concrete model of the product and parts. The detailed design phase is to crete a working prototype of the product and design tools such as DFA. CAD and CAM are employed in this phase. The output of the product design activity is to be the input for the manufacturing design activity. Using the proposed model, one can effectively and efficiently manufacture a high-quality, low-cost product with short delivery time, and above all achieve customer'ssatisfaction.isfaction.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.3
• /
• pp.65-73
• /
• 2015

This paper presents a method of predicting the machining parameters on the turning process of low carbon steel using a neural network with back propagation (BP) and particle swarm optimization (PSO). Cutting speed, feed rate, and depth of cut are used as input variables, while surface roughness and electric current consumption are used as output variables. The data from experiments are used to train the neural network that uses BP and PSO to update the weights in the neural network. After training, the neural network model is run using test data, and the results using BP and PSO are compared with each other.

• Journal of Korean Society for Quality Management
• /
• v.17 no.1
• /
• pp.89-106
• /
• 1989

For Weibull distributed lifetimes, this paper presents asymptotically optimal accelerated life test plans for practical applications under intermittent inspection and type-I censoring. Computational results show that the asymptotic variance of a low quantile at the design stress as optimal criterion is insensitive to the number of inspections at overstress levels. Sensitivity analyses indicate that optimal plans are robust enough to moderate departures of estimated failure probabilities at the design and high stresses as input parameters to plan accelerated life tests from their true values. Monte Carlo simulation for small sample study on optimal accelerated life test plans developed by the asymptotic maximum likelihood theory is conducted. Simulation results suggest that optimal plans are satisfactory for sample size in practice.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.359-369
• /
• 2014

Due to the severe market conditions, pre-entrepreneur seeks to start their business through franchise company. This paper, using the data envelopment analysis(DEA) method, examines efficiency of a group of franchise company in order to provide efficiency information with pre-entrepreneur. Output-oriented DEA model is applied in the investigation of efficiency, and the overall efficiency score is decomposed into pure technical efficiency and scale efficiency. The input variables selected to evaluate the efficiency are franchise deposit, franchise contribution cost and the output variables are sales and number of franchises, and length of business. The results of this paper show franchise industry have the low level of overall efficiency and the main sources of inefficiency is found technical rather than scale. As a result, this paper provides not only the current status of efficiency information of a franchise with pre-entrepreneur but also give warning when they sign-up with franchise business.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.4
• /
• pp.127-137
• /
• 2009

This paper is proposed that in-output Digital module is acquired a vibration signal of a rotating machinery by Data Acquisition System. The module is designed to get ride of nose through low pass filter on the vibration signal from sensors and set the gain value for being able to sampling AC to DC, and also the sampled data by sampler and the conversed data by DIP/FPGA is supplied to the analyzer for analysis at a software tool. The DIP(Digital Signal Processor) of the Digital input/output Board makes Average voltage, Peak to Peak voltage, RMS(Root Mean Square) and Gap voltage, also FFT(Fast Fourier Transform) for rotating vibration diagnosis.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.16 no.1
• /
• pp.120-134
• /
• 1991

Various technological forecasting models have been proposed to represent the time pattern of technological growths. Of six such models studied, some models do significantly better than others, especially at low penetration levels, in predicting future levels of growth. Criteria for selecting an appropriate model for technological growth model are examined in this study. Two major characteristics were selected which differentiate the various models ; the skew of the curve and the underlying assumptions regarding the variance of the error structure of the model. Although the use of statistical techniques stil requires some subjective input and interpretations, this study provides some practical procedures in the selection of technological growth models and helps to reduce or control the potential source of judgmental error inconsistencies in the analyst's decision.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.279-283
• /
• 2012

In is paper, we design and implement the low power, high speed touch screen controller that calculates and outputs the coordinate of touch point on the touch screen of mobile devices. The system clock is 10HMz, the number of input channels is 21, standby current is $20{\mu}A$, dynamic range of input is 140pF~400pF and the response time is 0.1ms/frame. It contains the power management unit for low power, automatic impedance calibration unit in order to adapt to humidity, temperature and evaluation board, adjacent key and pattern interference suppression unit, serial interface unit of I2C and SPI. The function and performance is verified by using FPGA and $0.18{\mu}m$ CMOS standard process. The implemented touch screen is designed for using in the double layer ITO(Indium Thin Oxide) module with diamond pattern and single layer ITO module for cost-effective which are applied to mobile phone or smart remote controller.