• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.3
• /
• pp.1-7
• /
• 2015

PURPOSE: The aim of this study was to investigate the effects of exercise intensity and initial timing on functional recovery following sciatic nerve injury in rats. METHODS: Total of 80 Sprague-Dawley rats was used and randomly divided 6 groups. Under deep anesthesia, the sciatic nerve was nipped by adapted hemostatic tweezers for 30 seconds and the injured nerve was transparent under naked eyes. Acute exercise groups was applied treadmill after sciatic nerve crush injury during 5days with three type intensity. Late exercise groups was also applied treadmill during 5 days with three type intensity after 5 days break. Values of sciatic functional index were measured and analyzed in each group after exercise period. RESULTS: The sciatic functional index values between control groups 1, acute low-intensity group, acute middle-intensity group in acute phase showed statistical significant (p<.05). The sciatic functional index values between control groups 2, late low-intensity group, late middle-intensity group and late high-intensity in late phase showed statistical significant (p<.05). The comparison in acute and late phase, sciatic functional index values of each low-intensity group and each high-intensity group showed statistical significant (p<.05). CONCLUSION: Whether at acute or late phase, treadmill exercise as a therapy obtained beneficial effects of functional recovery and exercise training at low speed is more beneficial effects on the recovery of motor function in acute phase.

• Transactions of Materials Processing
• /
• v.29 no.1
• /
• pp.27-36
• /
• 2020

The Goss texture component of {110}<001> is well known as one of the best texture components to improve the magnetic properties of electrical steel sheets. The small amount of the Goss texture component is obtained at the surface of the steel sheet by shear deformation due to friction between the steel sheet and the roll during conventional symmetric rolling. This study aims to identify a method to obtain high intensity of the Goss texture component not only at the surface but in the whole layer of the steel sheet by shear deformation of asymmetric rolling. Low carbon steel sheets, which have different initial texture, were asymmetrically rolled by about 50%, 70%, and 80%. The pole figures of the top, center, and bottom layers of the initial and asymmetrically rolled low carbon steel sheets were measured by an X-ray diffractometer. Based on the measured pole figures of these samples, the intensities of the main texture components were analyzed for the initial and asymmetrically rolled low carbon steel sheets. As a result, the initial low carbon steel sheet with the γ-fiber component showed a higher intensity of the Goss texture component in the whole layer than the steel sheet with other texture components after asymmetric rolling.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.45-53
• /
• 2001

Recently some studies have shown that low light intensity followed by final cure at high light intensity may result in a smaller marginal gap and may be no negative effect on material properties. The purpose of this study was to evaluate the influence of the initial cure with low intensity on the shear bond strength of dentin and the microhardness of composite resin. Twenty intact bovine teeth were prepared for shear bond strength test and each tooth sectioned to three specimens. The specimens were randomly divided into three groups according to the light intensity and curing time as follows; Group I. $450mmW/cm^2$ 40sec Group II. $300mmW/cm^2$ 20sec and $600mmW/cm^2$ 20sec Gropu III. $250mmW/cm^2$ 20sec and $450mmW/cm^2$ 20sec. Samples of each group were restored with light-cured composite resin after dentin bonding and then the shear bond strength of each specimen were measured using universal testing machine. Ten resin specimens per group were prepared. After 24 hours, the Vickers microhardness value was measured at the top and bottom surfaces. The result are as follows; 1. Mean value of low initial intensity groups(II, III) were higher than the control group(I) in shear bond strength, but no significant difference could be found. 2. No significant difference could be found between three groups in microhardness.

• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.3
• /
• pp.2147-2154
• /
• 2020

Background: Improperly conducted exercise may lead to worsening of musculoskeletal complications. Such may worsen due to increased repetition and intensity during exercise. In addition, different responses may show different needs for training program. Objectives: To compare kinematics of symmetric concentric and eccentric motions during increased repetitions and intensities for men and women. Design: Quasi-randomized trial. Methods: A total of ten men and eleven women participated in this study. Concentric and eccentric motions of the lateral raises were observed for initial positions of abduction and adduction. Low and high exercise intensities were applied, and 15 repetitions were conducted for both intensities. Initial, 3 inbetween repetitions, and last repetition were recorded for comparisons. Results: The concentric or abduction motions showed no significant differences for all comparisons. However, eccentric or adduction motions showed greater significant differences as the exercise intensity increased for both men and women. Such significant differences were most prevalent during the first and last repetitions with greatest differences during the initial repetitions. Conclusion: Kinematic difference between men and women during increased repetitions and intensity indicate the need for more individualized exercise intervention and consideration between men and women. Individualized interventions may prevent exercise-induced postural abnormality and corresponding musculoskeletal dysfunction.

• Phonetics and Speech Sciences
• /
• v.3 no.4
• /
• pp.63-70
• /
• 2011

Recent studies on English $L^*$ (low pitch accent) have revealed the difference of changes in acoustic manifestation between utterances produced by Koreans and those produced by native speakers of English. However, not much effort has been made to compare $L^*$ focused constituents and non-focused constituents. At the same time, most previous works on focus realization are lacking in terms of normalization of acoustic measurement. Therefore, this research is dedicated to comparing the $L^*$ focused items and non-focused items realized by Koreans and Americans and to examining the realization of English $L^*$ produced by the two language groups with improved normalization of the acoustic features (F0, intensity and duration). Within-group analysis comparing focused words and non-focused words showed both Americans and Koreans prolonged the $L^*$ focused syllables but the effect size of syllable lengthening made by Koreans was far less than that made by Americans. Furthermore, significant F0 lowering was found in Americans but not in Koreans. However, the effect of intensity change caused by $L^*$ focus was not significant within each group. The effect of focused words was tested between the two groups revealing that Koreans implemented English $L^*$ focus with higher F0, lower intensity and shorter duration than Americans. In the instances in which a significant Group x Focus Location (initial, middle and final of a sentence) interaction was found, further analysis testing the effect of Group on each Focus Location was conducted. The testing showed that the Koreans produced shorter syllables at initial and middle of a sentence and higher F0 at initial of a sentence than Americans. Implications for the intonation training were also discussed.

• Journal of the Korean Society of Physical Medicine
• /
• v.15 no.1
• /
• pp.43-54
• /
• 2020

PURPOSE: This study examined the effects of mild-intensity exercise (MIE) and high-intensity interval exercise (HIIE) on the recovery of the motor function over time in sciatic nerve crush injury rats. METHODS: The MIE group ran on a treadmill at a speed of 8.3 m/min to perform low-intensity training with maximum oxygen uptakes ranging from 40 to 50%. The HIIE group ran on the treadmill at a speed of 25 m/min to perform high-intensity training with a maximum oxygen uptake of 80%. The interval training was performed based on a 1:1 work-to-rest ratio. The effects of each form of exercise on the rats' walking abilities following their recovery from the peripheral nerve injuries were evaluated based on the results of behavior tests performed at one and 14 days. RESULTS: According to the test results, the MIE group showed significant improvements in the rats' ankle angle in the initial stance phase, and in the ankle and knee angles in the toe-off phase (p<.05). The HIIE group exhibited significant improvements in the ankle and knee angles in the initial stance phase, SFI(p<.05). CONCLUSION: The state of such patients can be improved by applying the results of this study in that MIE and HIIE on a treadmill can contribute to the recovery of the peripheral nerve and motor skill. In particular, MIE is used as a walking functional training in the toe-off stance phase, while HIIE is suitable in the initial stance stage.

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.488-493
• /
• 2004

The effects were examined from several conditions of $TiO_2$ photocatalysis reaction to phenols degradation by changing it's reacting conditions such as phenol concentration, pH, $TiO_2$ concentration, $H_2O_2$ concentration, flow rate, and intensity of ultraviolet rays. Phenol degradation was more efficient in low concentration of phenol, neutral pH. Phenol degradation appeared to increase as concentration of $TiO_2$ photocatalyst, that of $H_2O_2$ and intensity of ultraviolet rays increased. As $TiO_2$ dosage increased, initial rate constant k linearly increased. When $H_2O_2$ was injected more than optimum, phenol removal rate didn't increase in proportional to the change of $H_2O_2$ concentration as OH radicals was being consumed. When flow rate is less than $4.75m^3/m^2$ day, phenol removal efficiency appeared to decrease as ultraviolet rays transmission rate becomes low by $TiO_2$ suspension coated in photo reaction column. Meanwhile, initial rate constant according to light intensity change in less than $25mW/cm^2$ appeared to be in proportion to light intensity ($mW/cm^2$) Removal efficiency decreased about 12% after 180 minutes of reaction time while showed stable removal efficiency of 100% after 300 minutes when using regenerated $TiO_2$.

• Restorative Dentistry and Endodontics
• /
• v.28 no.2
• /
• pp.134-145
• /
• 2003

Mechanical properties and microleakage of two composites [conventional hybrid type DenFil (VERICOM Co., Anyang, Korea) / micro matrix hybrid type Esthet X (Dentsply Caulk, Milford, DE, U.S.A.)] were evaluated to assess whether variable light intensity curing is better than conventional curing technique. Curing was done for 40 seconds in two ways of 2 step soft-start technique and 5 step ramping technique. Three kinds of light intensities of 50, 100, $200{\;}mW/\textrm{cm}^2$ were initially used for 10, 20, 30 seconds each and the maximum intensity of $600 {\;}mW/\textrm{cm}^2$ was used for the rest of curing time in a soft-start curing tech nique. In a ramping technique, curing was done with the same initial intensities and the light intensity was increased 5 times with the same rate to the maximum intensity of $600{\;}mW/\textrm{cm}^2$. After determining conditions that showed no different mechanical properties with conventional technique, Esthet X composite was filled in a class V cavity, which dimension was $4{\times}3{\times}1.5{\;}mm$ and cured under those conditions. Microleakage was evaluated in two ways of dye penetration and maximum gap estimation through SEM observation. ANOVA and Spearman's rho test were used to confirm any statistical significance among groups. The results were as follows : 1 Several curing conditions of variable light intensities resulted in the similar mechanical properties with a conventional continuous curing technique, except conditions that start curing with an initial light intensity of $50{\;}mW/\textrm{cm}^2$. 2. Conventional and ramping techniques were better than soft-start technique in mechanical properties of microhardness and compressive strength. 3. Soft-start group that started curing with an initial light intensity of $100{\;}mW/\textrm{cm}^2$ for 10 seconds showed the least dye penetration. Soft-start group that started curing with an initial light intensity of $200{\;}mW/\textrm{cm}^2$ for 10 seconds showed the smallest marginal gap, if there was no difference among groups. 4. Soft-start technique resulted in better dye-proof margin than conventional technique(p=0.014) and ramping technique(p = 0.002). 5. There was a very low relationship(p=0.157) between the methods of dye penetration and marginal gap determination through SEM evaluation. From the results of this study, it was revealed that ramping technique would be better than conventional technique in mechanical properties, however, soft-start technique might be better than conventional one in microleakage. It was concluded that much endeavor should be made to find out the curing conditions, which have advantages of both aspects or to solve these kinds of problems through a novel idea of polymerization.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1358-1364
• /
• 2009

Electric polarity of working electrode and counter electrode was periodically switched at the intervals of 30 sec. Electric current generated by anodic and cathodic reaction of working electrode was reached to +30 and -12 mA in low intensity pulsed electric field (LIPEF). The yeast growth, ethanol production, and malate consumption in the initial cultivation time were more activated in the LIPEF than the conventional condition (CC). Polyphenol, total phenolic contents (TPC), and total flavonols (TF) were gradually decreased in all cultivation conditions during incubation for 2 weeks but antioxidation activity was not. TF was significantly lower in 3 and 4 V of LIPEF than CC and 2 V of LIPEF; however, the polyphenol, TPC, and antioxidation activity were a little influenced by the LIPEF. After ripening of the winemaking culture for 15 days, polyphenol, TPC, and TF were a little increased but the antioxidation activity was not.

• Transactions of Materials Processing
• /
• v.28 no.5
• /
• pp.287-293
• /
• 2019

The plastic strain ratio is one of the factors of the deep drawability of metal sheets. The plastic strain ratio of Al sheet is low value. Therefore, it is necessary to increase the plastic strain ratio in order to improve the deep drawability of the Al sheet. This study investigated the increase in the plastic strain ratio and the texture change of AA1050 Al sheet after the hot asymmetric rolling. The average plastic strain ratio of initial AA1050 Al sheets was 0.41. After 84% hot asymmetric rolling at $400^{\circ}C$, the average plastic strain ratio was 0.77. The average plastic strain ratio of 84% hot asymmetrically rolled AA1050 Al sheet at $400^{\circ}C$ is 1.9 times higher than that of initial AA1050 Al sheet. The ${\mid}{\Delta}R{\mid}$ of 84% hot asymmetrically rolled AA1050 Al sheet at $400^{\circ}C$ is 1/2 times lower than that of initial AA1050 Al sheet. This result is due to the development of the intensity of the ${\gamma}-fiber$ texture and the decrease of the intensity of {001}<100> texture after the hot asymmetric rolling of AA1050 Al sheet.