• Nuclear Engineering and Technology
• /
• 제40권3호
• /
• pp.225-232
• /
• 2008

To understand the effect of the cyclic strain rate on the environmentally assisted cracking behaviors of SA508 Gr.1a low alloy steel in deoxygenated water at $310^{\circ}C$, the fatigue surface and a sectioned area of specimens were observed after low cycle fatigue tests. On the fatigue surface of the specimen tested at a strain rate of 0.008 %/s, unclear ductile striations and a blunt crack tip were observed. Therefore, metal dissolution could be the main cracking mechanism of the material at this strain rate. On the other hand, on the fatigue surfaces of the specimens tested at strain rates of 0.04 and 0.4 %/s, brittle cracks and flat facets, which are evidences of the hydrogen induced cracking, were observed. In addition, a tendency of linkage between the main crack and the micro-cracks was observed on the sectioned area. Therefore, at higher strain rates, the main cracking mechanism could be hydrogen induced cracking. Additionally, evidence of the dissolved MnS inclusions was observed on the fatigue surface from energy dispersive x-ray spectrometer analyses. Thus, despite the low sulfur content of the test material, the sulfides seem to contribute to environmentally assisted cracking of SA508 Gr.1a low alloy steel in deoxygenated water at $310^{\circ}C$.

• 한국정밀공학회지
• /
• 제22권12호
• /
• pp.149-155
• /
• 2005

The rotating components such as turbine rotors in service are generally subjected to multiaxial cyclic loading conditions. The prediction of fatigue lift for turbine rotor components under complex multiaxial loading conditions is very important to prevent the fatigue failures in service. In this paper, axial and torsional low cycle fatigue tests were preformed for 3.5NiCrMo steels serviced low pressure turbine rotor of nuclear power plant. Several methods to predict biaxial fatigue life such as Tresca, von Mises and Brown & Miller's critical plane approach were evaluated to correlate the experimental results for serviced NiCrMoV steel. The fracture mode and fatigue characteristics of NiCrMoV steel were discussed based on the results of fatigue tests performed under the axial and torsional test conditions. In particular, the Brown and Miller's critical plane approach was found to best correlate the experimental data with predictions being within a factor of 2.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1626-1635
• /
• 1997

It is important to ensure the reliability of the first localized reactor vessel steel. To satisfy with this purpose, a study on the impact/hardness, low cycle fatigue(LCF), crack growth rate(da/dN) and fracture toughness( ) of base material(BM) and weld metal(WM) were performed under room temperature air and corrosion conditions. A summary of the results is as folows : (1) Charpy impact absorbed energy of BM was the highest value, heat affected zoon(HAZ) and the lowest, WM. The hardness of BM was similar to HAZ. (2) Coefficients of Manson equation using the monotonic tensile test data were obtained for the present material. (3) The effects of stress ratio and ambient (120.deg. C and NaCl) condition on da/dN were investigated, da/dN with NaCl condition expressed the highest value. (4) The results of Charpy V-notch impact test had good correlation with $K_{IC}$ characteristics and the lowest curve of $K_{IC}$ for BM was derived, more researches about WM and HAZ are required hereafter.

• 한국추진공학회지
• /
• 제21권6호
• /
• pp.73-82
• /
• 2017

재사용 발사체용으로 개발되는 엔진은 반복 사용 조건에 따른 저사이클 열피로 문제를 고려해야 한다. 본 연구는 연소기 재생냉각채널에 사용되는 구리합금의 피로수명을 인장시험 데이터로부터 예측하기 위하여 기존의 연구자들이 제안하였던 수명예측식을 다양한 종류의 구리합금의 경우에 적용하여 비교하였다. 제안된 수명예측식 중 공통경사법은 구리합금의 수명 예측에서 가장 좋은 결과를 보여 주었으며, 수정 Mitchell 방법은 OFHC 구리의 수명 예측에서 가장 좋은 결과를 보여주었다.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.2752-2759
• /
• 1996

This paper presents crack growth analysis approach on the basis of neural networks, a branch of cognitive science to high temperature low cycle fatigue that shows strong nonlinearity in material behavior. As the number of data patterns on crack growth increase, pattern classification occurs well and two point representation scheme with gradient of crack growth curve simulates crack growth rate better than one point representation scheme. Optimal number of learning data exists and excessive number of learning data increases estimated mean error with remarkable learning time J-da/dt relation predicted by neural networks shows that test condition with unlearned data is simulated well within estimated mean error(5%).

• 한국압력기기공학회 논문집
• /
• 제13권2호
• /
• pp.19-30
• /
• 2017

Austenitic Stainless Steels (ASSs) are widely used as structural materials in the pressurized water reactors (PWRs) because of their superior mechanical properties and corrosion resistance. However, it is well known that ASSs are susceptible to the environmental assisted cracking (EAC) such as environmental assisted fatigue (EAF) during the long term operation. There have been extensive tests and researches to understand the extent and the mechanisms of environmental effects. In this paper, the world-wide EAF test results of ASSs are introduced including those of Korean test programs. The suggested EAF mechanisms of ASSs are also discussed. Finally, the areas of further research to resolve the issue of EAF are suggested.

• 한국강구조학회 논문집
• /
• 제9권2호통권31호
• /
• pp.193-204
• /
• 1997

본 연구에서는 먼저 강한 지진하중에 의해 발생되는 구조물의 파괴와 관련되어 있는 중요한 물리적 인자들의 상호관계를 정량화하기 위하여 반복하중을 받는 구조성분들에 대한 소성피로 문제에 대해서 검토하였으며, 강한 지진과 같은 극심한 반복하중하에서 구조성분들에 대한 극저사이클 피로파괴의 새로운 개념이 도입되었다. 또한 강구조물 요소에 대한 극저사이클 피로파괴 실험을 실시하였다. 실험은 수회에서 20회사이의 반복하중재하 과정에서 궁극적인 파괴를 실현하기 위하여 시도 되었다. 시험체는 H형강의 플랜지 단면처럼 강부재내의 않은 평판요소를 의미하는 직사각형 평판을 사용하였다. 이 시험체에는 비탄성좌굴, 소성신장 또는 이들 2가지의 조합이 발생한 후 부재가 완전히 파괴에 이를때까지 축방향 반복하중을 가하였다. 그 결과 극저사이클 피로하중에 의한 극한파괴상태는 구조요소단면 최외단에서의 최대변형율과 밀접하게 관련되어 있슴을 알 수 있었다.

• 한국철도학회논문집
• /
• 제6권1호
• /
• pp.21-28
• /
• 2003

Environment-dependent fatigue life of Cu-Cd alloy wires used as messenger wires was investigated. Tensile test results showed the decrease of tensile strength and elongation of messenger wires by 3.7% and 16.8%, respectively, in used specimens when compared to new ones. Messenger wires used at industrial region for 26 yeras showed 35∼50% decrease in fatigue life, which is partly due to the in stress concentrations by formation of corrosion products at the surface. Single wires showed better fatigue properties than stranded wires, especially at low cycle regions with higher stresses. Stranded wires showed shorter fatigue lives than single wires because of friction between wires by surface contact. Service life of messenger wires was dependent upon the environments which they were exposed to. SO$_2$ and humidity deteriorated the fatigue properties by environmental degradation.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.41-48
• /
• 1999

The fatigue life tests were performed in strain control with triangular and hole-time wave-forms at $650^{\circ}C$. The fatigue lifes were investigated according to waveform examining damage mechanisms, which could be used to predict the fatigue life and estimate the remaining life. The results obtained are as follows; The fatigue lifes were in order of the fast-fast>the fast-slow>the slow-fast in the triangular waveforms, and the fatigue lifes in slow-fast waveforms got shorter in the hold-time waveforms. The damage mechanisms of the fracture surfaces were transgranular fracture in the fast-fast, the fast-slow waveforms and intergranular fracture in the slow-fast waveform.

• 열처리공학회지
• /
• 제8권3호
• /
• pp.169-181
• /
• 1995

This study has been performed to investigate some effects of the power density and traverse speed of laser beam on the optical microstructure, hardness and fatigue resistance of gray cast iron treated by laser surface hardening technique. Optical micrograph has shown that the dissolution of graphite flakes and the coarsening of lath martensite tend to increase with a small amount of retained austenite as the power density increases under the condition of a given traverse speed. Hardness measurements have revealed that as the power density increases, hardness values of outermost surface layer increases from Hv=620 to Hv=647 in case of traverse speed of 2.0m/min at gray cast iron. Fatigue test has exhibited that the fatigue strength of laser surface hardened specimen is superier compared to that of untreated specimen, showing that values for the fatigue strength at $N_f=10^7$ of gray cast iron laser-surface-hardened at a low power density of $4076w/cm^2$ and a high power density of $8153w/cm^2$ under the condition of a given traverse speed of 2.0m/min are $15kg_f/mm^2$ and $20kg_f/mm^2$, respectively, whereas the fatigue strength of untreated specimen is $11kg_f/mm^2$. Under high stress-low cycle condition a noraml brittleness fracture appears, whereas a ductile fracture with beach mark is observed in the specimen tested under low stress-high cycle condition.