• ETRI Journal
• /
• v.22 no.3
• /
• pp.1-9
• /
• 2000

Self-Clocked Fair Queueing (SCFQ) algorithm has been considered as an attractive packet scheduling algorithm because of its implementation simplicity, but it has unbounded delay property in some input traffic conditions. In this paper, we propose a Rate Proportional SCFQ (RP-SCFQ) algorithm which is a rate proportional version of SCFQ. If any fair queueing algorithm can be categorized into the rate proportional class and input is constrained by a leaky bucket, its delay is bounded and the same as that of Weighted Fair Queueing (WFQ) which is known as an optimal fair queueing algorithm. RP-SCFQ calculates the timestamps of packets arriving during the transmission of a packet using the current value of system potential updated at every packet departing instant and uses a starting potential when it updates the system potential. By doing so, RP-SCFQ can have the rate proportional property. RP-SCFQ is appropriate for high-speed packet-switched networks since its implementation complexity is low while it guarantees the bounded delay even in the worst-case input traffic conditions.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.564-571
• /
• 2016

This study proposes an adaptive neuro-fuzzy inference system (ANFIS)-based rotor position controller for brushless direct current (BLDC) motors to improve the control performance of the drive under transient and steady-state conditions. The dynamic response of a BLDC motor to the proposed ANFIS controller is considered as standard reference input. The effectiveness of the proposed controller is compared with that of the proportional integral derivative (PID) controller and fuzzy PID controller. The proposed controller solves the problem of nonlinearities and uncertainties caused by the reference input changes of BLDC motors and guarantees a fast and accurate dynamic response with an outstanding steady-state performance. Furthermore, the ANFIS controller provides low torque ripples and high starting torque. The detailed study includes a MATLAB-based simulation and an experimental prototype to illustrate the feasibility of the proposed topology.

• Journal of the Korean Ceramic Society
• /
• v.26 no.2
• /
• pp.267-275
• /
• 1989

YBa2Cu3O7-x oxide superconductors were fabricated by sintering and hotisostatic pressing (HIP), and their microstructures and properties were compared with each other. Thougha part of the second phase was observed along grain boundaries, their structures were consisted of single (123) phase and they had many porosities. But, porosities were remakably reduced by Hiping and the densification was brought about. The structure of (123) compound also showed a number of twins, which are typical of high Tc superconductors. The on-set temperature of YBa2Cu3O7-x compound sintered at 96$0^{\circ}C$ in oxygen and hipped at 88$0^{\circ}C$ was highest, but that shwoed 0 resistance at 87$^{\circ}$K, which is a little lower than the compound sintered at 96$0^{\circ}C$. HIP treatment also increased the critical current density of as-sintered compound. However, its value was low, which may be ascribed to the many pores of starting-sintered compact and partially to the second phase along grain boundaries.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.3
• /
• pp.9-12
• /
• 2005

[ $Y_1Ba_2Cu_3O_{7-8}$ ] (YBCO) coated conductor has been fabricated by batch-type process using oxide-precursor-based metal-organic deposition (MOD) method. The batch-type process can be scaled up more simply to Produce long-length YBCO conductor than the reel-to-reel process. Also, it has less handling problems and is adequate to the ambient gas environment. In this work, YBCO oride powder was used as a starting precursor for MOD method. After reel-to-reel dip coating process, me ter-long-buffered metal tape was wound around a cylinder and underwent calcination and annealing processes. Annealed YBCO films showed good c-axis alignment and dense surface morphology with no cracks, but exhibited very low critical current density of $10^5\;A/cm^2$.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.341-342
• /
• 2017

본 논문에서는 초저온 냉동고용 단상유도전동기의 기동전류저감을 위한 알고리즘을 제안한다. 단상유도전동기의 경우, 스스로 기동이 불가능하므로 다양한 기동방식을 채택하고 있다. 본 논문에서는 커패시터 기동-운전 방식을 사용하고 있으며, 이 경우 기동 시 정격전류의 수배에 해당되는 돌입전류가 발생한다. 이로 인해 커패시터 및 기동 보조장치의 운전성능 및 수명 감소에 직접적인 영향을 미친다. 따라서 본문에서는 기존 운전방식의 변경 없이 단상 인버터를 적용하여 기동전류를 저감하고 운전모드를 전환하는 알고리즘을 제안하고자 한다. 제안한 알고리즘의 효용성은 다양한 실험을 통해서 검증한다.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.41.2-41.2
• /
• 2019

The B-fields In STar-forming Region Observations (BISTRO 1 and 2) is a large program of the James Clerk Maxwell Telescope (JCMT) using SCUBA-2 and POL-2, starting in 2016. We aim to study the roles of magnetic fields in star formation by observing 32 fields of nearby low-mass and high-mass star forming regions. The angular resolution and the wavelength provided by JCMT (14 arcsecond at 850 micrometer) are ideal to investigate the intermediate scales of magnetic fields (1000-20000 au) associated in cold dense cores and filaments. We report the current status of this project and discuss the magnetic fields of the Serpens Main molecular cloud in which several filaments with various physical properties have been identified.

• Current Optics and Photonics
• /
• v.6 no.5
• /
• pp.473-478
• /
• 2022

To overcome the capture-range problem in phase-diversity phase retrieval (PDPR), a geometrical-optics initial-estimate method is proposed to avoid a local minimum and to improve the accuracy of laser-wavefront measurement. We calculate the low-order aberrations through the geometrical-optics model, which is based on the two spot images in the propagation path of the laser, and provide it as a starting guess for the PDPR algorithm. Simulations show that this improves the accuracy of wavefront recovery by 62.17% compared to other initial values, and the iteration time with our method is reduced by 28.96%. That is, this approach can solve the capture-range problem.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.39-44
• /
• 2023

As the number of companion animals reaches 15 million in 2022, the pet wear market is expected to grow at an average annual rate of about 14.5% from KRW 1.5684 trillion in 2014 to a market size of over KRW 6 trillion in 2027. However, most of the pet clothing and various supplies currently in circulation are either cheap, low-quality products imported from China or other countries, or expensive products released by overseas luxury brands. Therefore, it is urgent to develop a brand that can compete with luxury products coming from overseas by developing premium pet fashion products using high-end functional fabrics produced domestically. This study seeks to propose ways to revitalize the domestic pet fashion market by examining the current status of global pet fashion, the domestic textile industry, and the current status of the pet fashion market. The suggestions and expected effects are as follows. First, active support is needed for the development of products using domestically produced fabrics, such as raising awareness through various subsidy projects and contests. Second, it is expected that small and medium-sized businesses will be revitalized through the production of pet fashion products using high-quality functional knit fabrics produced in northern Gyeonggi Province. Third, it is necessary to produce high-quality premium products through continuous and intensive support from the government and collaboration between large corporations and small and medium-sized enterprises. Fourth, there is an urgent need to provide opportunities to train experts for the expected effects of starting businesses and creating new jobs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.500-504
• /
• 2004

This research is about the result of leakage current waveform about the situation of surface leakage current and environmental changes(Salt fog, clean fog and rain) by EPDM polymer insulators' amount of salt. The researcher presents the result of changing about fundamental harmonic, 3rd harmonic and 5th harmonic from starting point of supplying power to flashover. In this study, researched environmental affects (clean fog, salt fog and .am) about surface aging of polymer insulators and used frequency spectrum of leakage current waveform to develop the diagnostic technique of surface aging. When amount of salt contents changed, surface aging stage and the degree of aging (distortion factor) about 3rd and 5th harmonir waveform on low frequency harmonic wave. The distortion factor which is harmonic percentage about basic harmonic is important pointer to evaluate the surface condition of polymer insulators.

• Progress in Superconductivity
• /
• v.6 no.2
• /
• pp.142-145
• /
• 2005

YBCO coated conductors have been fabricated with a newly developed oxide-precursor-based MOD process. The precursor solution was synthesized with low cost YBCO powders as starting materials and YBCO coated conductors have been deposited on IBAD substrate ($CeO_2$/IBAD-YSZ/SS). YBCO coated conductor prepared by dip coating shows transport $I_c$ of 15A/cm-w at 77 K. Microstructural and crystallographic analyses indicate that YBCO layer was grown in epitaxy with substrate and exhibited well-developed dense microstructure. Also discussed are processing and analysis of YBCO coated conductor by slot-die web coating method. It was shown that this oxide-based MOD process provides a low cost route to coated conductor with high $J_c$.