• 광물과 암석
• /
• 제36권4호
• /
• pp.289-302
• /
• 2023

본 연구지역은 강원도 횡성군 강림리로 치악산 편마암 지질에 해당된다. 본 연구지역의 지하수에서 우라늄 및 라돈 등과 같은 자연 방사성 원소의 농도가 규제기준을 초과한 것으로 조사되었다. 이에 해당 지하수 대수층에서 획득한 시추 코어를 대상으로 자연 방사성 원소의 용출 기작을 광물학적으로 규명하기 위해 인공풍화 실험을 수행하였다. 이를 위해 먼저 시추 코어시료의 실험 전 광물학적 특성을 분석한 결과, 저온 및 중온 열수 변성 작용을 받아 생성될 수 있는 녹니석계 클리노클로어의 함량이 높게 나타났다. 또한, 우라늄보다 토륨의 함량이 10배 정도 높은 것으로 확인되었다. 인공풍화 실험 결과, 함방사성원소 광물의 용해에 따라 1일 이내에 토륨의 농도가 증가하는 양상을 보이다가 그 이후에는 농도가 감소하는 경향을 보였다. 이는 이차광물 형태로 존재하는 토라이트의 용해에 의하여 토륨이 용출된 후, 황산염 등과 같은 형태로 재침전되기 때문인 것으로 판단된다. 시추 코어 내 우라늄의 함량이 토륨보다 낮지만, 풍화 실험 결과에서는 토륨보다 100배 이상의 농도로 용출된 것으로 확인되었다. 이는 우라늄이 풍화가 많이 된 토라이트에 함유되어 있거나 UO₂²⁺ 등의 이온 형태로 광물 표면에 흡착된 상태로 존재하면서 지속적으로 용해 또는 탈착되기 때문이다. 또한 토륨과 우라늄의 용출 양상은 탄산염의 농도와 양의 상관관계를 갖는 것으로 나타났다. 하지만, 지하수 내 토륨과 우라늄의 농도 사이의 상관성은 낮은 것으로 조사되었는데, 이는 앞서 설명한 바와 같이 두 원소가 다른 기원으로부터 지하수에 용출되기 때문인 것으로 판단된다. 두 방사성 원소의 용출속도는 다양한 반응속도 모델 중 Parabolic diffusion와 Pseudo-second order kinetic 모델에 의해 가장 잘 모사되는 것으로 확인되었다. 이러한 반응속도 모델의 회귀 상수들을 이용하여 우라늄의 농도가 먹는 물 수질기준까지 다다르는 기간을 유추해 본 결과, HCO₃의 농도가 높은 중성환경의 지하수 조건에서 약 29.4년으로, 대체적으로 빠르게 용출되는 것으로 예측되었다.

• 한국수자원학회논문집
• /
• 제57권1호
• /
• pp.35-44
• /
• 2024

댐유입량 예측에 대하여 데이터 기반 머신러닝 및 딥러닝(Machine Learning & Deep Learning, ML&DL) 분석도구들이 공개되어 다양한 분야에서 ML&DL의 적용연구가 활발히 진행되고 있으며, 모델의 자체 성능향상 뿐만 아니라 모델의 특성을 고려한 데이터의 전처리도 댐유입량을 정확하게 예측하게 하는 중요한 모델성능 향상의 요소라고 할 수 있다. 특히 기존 강우자료는 적설량을 열선 설비를 통하여 녹여 강우량으로 환산되어 있으므로, 융적설에 따른 강우와 유입량의 상관관계를 왜곡하게 된다. 따라서 본연구에서는 소양강댐과 같이 융적설의 영향을 받는 댐유역에 대한 댐일유입량 예측시 겨울에 강설량이 적설이 되어 적게 유출되는 현상과, 봄에 융설로 인하여 무강우나 적은 비에도 많은 유출이 일어나는 물리적 현상을 ML&DL모델로 적용하기 위하여 필요한 강우 데이터의 전처리에 대한 연구를 수행 하였다. 강우계열, 유입량계열을 조합하여 3가지 머신러닝(SVM, RF, LGBM)과 2가지 딥러닝(LSTM, TCN) 모델을 구축하고, 최적 하이퍼파라메터 튜닝을 통하여 적합 모델을 적용하고 한 결과, NSE 0.842~0.894로 높은 수준의 예측성능을 나타내었다. 또한 융적설을 반영한 강우보정 데이터를 만들기 위하여 융적설 모의 알고리즘을 개발하고, 이를 통하여 산정된 보정강우를 머신러닝 및 딥러닝 모델에 적용한 결과 NSE 0.841~0.896 으로 융적설 적용전과 비슷한 높은 수준의 예측 성능을 나타내었으나, 융적설 기간에는 조정된 강우로 학습되어 예측되었을 때 실측유입량에 근접하는 모의결과를 나타내었다. 결론적으로, 융적설이 영향을 미치는 유역에서의 데이터 모델 적용시에는 입력자료 구축시 적설 및 융설이 물리적으로 타당한 강우-유출 반응에 적합하도록 전처리과정이 중요함을 밝혔다.

• 대한원격탐사학회지
• /
• 제40권2호
• /
• pp.229-241
• /
• 2024

클라우드 플랫폼을 이용한 빅데이터 처리기술의 발달로 위성영상과 같이 용량이 큰 자료에 대한 접근 및 처리와 분석이 최근 획기적으로 개선되고 있다. 본 연구에서는 그 플랫폼 중 하나인 Google Earth Engine (GEE) 기반의 전처리 완료된 Sentinel-1 합성개구레이더(synthetic aperture radar, SAR) 위성영상 자료의 후방산란계수 값에 비교적 간단한 토양수분량 추출 방법인 Change Detection Method를 적용하여, 2015~2023년의 국내 용담댐 유역 내 6개 관측소 지점 및 유역 평균에 대한 지표 토양수분량을 산정 후 실측과의 상관성 분석 및 GEE의 활용성을 검토하였다. 그 결과 SAR 위성영상 자체의 지표 측정 정확도와 자료간 특성 변동 등으로 인해 유역 내 관측소별 일부구역에 대해 산정한 지점 지표 토양수분량은 VH와 VV 편파에서 모두 0.1~0.3 수준의 낮은 상관성이 확인된 반면, 유역 전체 면적에 대한 평균 SAR 후방산란계수 값 추출 및 이동평균으로 자료의 불확실성 및 변동성을 완화시킨 유역 평균 지표 토양수분량은 0.5 수준의 향상된 결과를 보였다. 이렇게 GEE를 활용하여 산정된 토양수분량의 결과는 SAR 자료의 전처리에 있어 직접적으로 원하는 분석을 수행하지 못하는 제한점은 있지만, 방대한 위성영상 자료를 효율적으로 처리하여 장기간의 유역 평균과 같은 넓은 범위의 토양수분량을 산정, 평가해 볼 수 있다는 점에서 그 활용성을 확인할 수 있었다. 이를 바탕으로 향후 국내 여러 지점의 지표 토양수분량 관측자료와 연계해 주요 댐 유역의 평균지표 토양수분량 장기 변화 파악 등에 유용하게 활용될 수 있을 것으로 기대된다.

• 한국해양생명과학회지
• /
• 제9권1호
• /
• pp.9-21
• /
• 2024

마비성 패류 독소(Paralytic shellfish poisoning, PSP)는 유해 조류에 의해 생성되며, 독소에 노출된 수산물을 섭취하였을 때 중독이 발생한다. 수산물 중 PSP를 검출하는 표준 시험법인 Mouse bioassay (MBA)는 낮은 검출한계와 동물 윤리 문제로 대체 시험법의 개발 필요성이 대두되고 있다. 이러한 대체 시험법 중, PSP가 신경 세포막의 Na⁺ 채널을 차단하는 기전을 이용한 마우스 뇌신경 모세포종 세포 기반 시험법(Neuro-2a assay)의 표준화를 위한 노력이 대두되고 있다. Neuro-2a assay의 원리는 Neuro-2a 세포주에 Na⁺/K⁺ ATPase 억제제인 Ouabain(O)과 Na⁺ 채널 활성화제인 Veratridine (V)을 처리하여 과도한 Na⁺ 유입으로 인한 세포사멸을 유도한 상태에서, Na⁺ 채널 억제제인 PSP를 처리하게 되면 Na⁺ 유입이 차단되어 세포가 생존하는 것을 측정하는 것이다. 본 연구에서는 PSP 검출을 위한 Neuro-2a assay를 국내 연구 환경에 맞게 다양한 매개변수를 개선하여 최적 시험법을 확립하고자 하였다. 고려한 매개변수들은 세포밀도, 배양 조건 및 PSP 처리 조건 등으로, 그 결과는 아래와 같다. 초기 세포밀도는 40,000 cells/well로, 세포 배양시간 및 처리시간은 각각 24시간으로 설정하였다. 또한 최적 O/V 농도는 500/50 μM로 설정하였다. 본 연구에서 PSP 중 Saxitoxin (STX)에 대해서 O/V 처리가 된 상태에서 S자형 용량-반응 그래프가 도출되는 8가지 농도(368~47,056 fg/μl)를 확인하였고, Neuro-2a assay의 실험실 간 변동성 비교를 통해, 실험의 적정성 확인을 위한 5가지 Quality Control Criteria와 실험 데이터의 신뢰가능 범위(Data Criteria) 6가지를 설정하였다. 확 립된 조건으로 Neuro-2a assay를 진행한 결과 반수영향농도(EC₅₀) 값은 약 1,800~3,500 fg/μl로 나타났다. 실험실 간 변동성 비교 결과, Quality Control Criteria 값 및 Data criteria 값의 변동계수(coefficients of variation (CVs))가 1.98~29.15% 범위로 산출되어 실험의 적정성 및 재현성이 확인되었다. 본 연구를 통해 우리나라에서 활용할 수 있는 PSP 검출용 Neuro-2a assay 시험법의 최적 조건 및 5가지 Quality control 기준을 제시하였고, PSP 중 대표적인 독소인 STX을 대상으로 Neuro-2a assay를 실시한 결과 유의한 EC₅₀ 값을 산출할 수 있었으며, 향후 국내 수산물을 대상으로 MBA를 대체할 수 있는 PSP 검출법으로 활용될 것으로 기대된다.

• 한국작물학회지
• /
• 제14권
• /
• pp.1-40
• /
• 1973

수도의 다수확을 위하여 근래 다비재배의 경향이 높아가고 있는 반면에 등숙률의 저하가 증수저해요인으로 크게 문제되고 있다. 특히 최근 육성된 통일품종은 이점이 더 심각한 바 있어 등숙의 향상책을 모색하고저 1970년부터 1972년까지 3개년간에 걸쳐 수원 작물시험장포장과 인공기상실에서 주로 진흥과 통일을 공시하여 증숙에 관한 일련의 실험을 시행한 바 그 결과를 요약하면 다음과 같다. 1. 통일의 곡립은 발아등 종래품종에 비하여 세장하고 곡립의 폭 및 두께가 작으며 비중과의 상관관계는 진흥에 있어서는 곡립의 무게, 두께, 폭 및 길이의 순으로 낮으나 통일은 무게, 폭, 두께 및 길이의 순으로 낮았다. 2. 비중별 립수분포에 있어서 종래의 Japonica도는 비중 1.18을 정점으로 대부분 1.12이상에 분포하고 있으나 통일계통에서는 1.12이하의 곡립도 상당수 분포하였고 진흥이 비중 1.06이하에서 정현비율이 급감하고 있으나 통일에 있어서는 비중 1.20에서 0.96까지의 곡립의 정현비율이 별로 차이가 없으므로 1.06을 등숙립의 선별기준으로 삼는 것은 불합리한 것으로 인정된다. 3. 출수후의 등숙속도는 품종간차이가 현저하며 대체로 한랭지 재배품종일수록 느렸으며 통일은 원래 등숙이 빠른 편이나 등숙후기에는 기온의 저하로 인하여 그 속도가 떨어졌다. 4. 지발분얼 또는 약세분얼은 수당영화수도 적을 뿐 아니라 등숙률도 낮은데 통일은 지발분얼이 많고 이들은 저온하에서 출수하여 수전일수가 연장되고 등숙률이 떨어졌다. 5. 통일의 엽신은 짧고 넓으며 엽신전개력은 다비조건에서는 진흥만큼 크고 또 엽의 경사각도는 적어 수광태세가 양호하였다. 통일 엽신의 단위동화능력은 고온하에서는 비교적 크나 저온하에서는 떨어졌다. 6. 통일은 단간이며 하위절간이 짧고 굵어서 도복저항성이 크고 출수전 저장탄수화물이 많았으며 인산, 규산, 석회, 망간 및 마그네슘 등의 체내함유율이 높았다. 7. 통일은 비교적 많은 영화수를 가지고 있고 진흥이 영화수와 등숙률간에 유의적인 역상관이 있음에 비하여 통일은 고온다조하에서는 영화수가 많아도 등숙률은 떨어지지 않고 영화수증가에 비례하여 수량이 많아졌다. 8. 진흥에 비하여 통일의 뿌리는 천근성이며 고온하에서는 그 활력이 컸으나 저온시에는 엽신이 황갈색으로 변하고 그 변색정도에 비례해서 뿌리의 활력도 떨어졌다. 9. 통일은 수광태세가 좋고 동화일호흡균형상 유리한 생산구조를 갖어 진흥보다 이상적인 모형이었다. 10. 수원지방의 수도보통기재배에 있어서 수량생산기간의 일사량은 비교적 풍부한 편이나 8월25일이후에 출수할 때에는 평균기온이 22$^{\circ}C$이하로 빠르게 하강하므로서 기온이 보다 등숙의 제한요인으로 인정된다. 11. 진흥이 저온하에서도 등숙율이 비교적 높은데 통일의 등숙적온은 $25^{\circ}C$이상이며 21$^{\circ}C$이하에서는 완전등숙이 거의 불가능하였다. 12. 진흥은 감광성이 비교적 크고 감온성은 중정도인데 비하여 통일은 감광성은 작으나 기본영양생장성과 저온하의 출수지연도가 컸었다. 13. 진흥은 질소의 후기중점시비에 의하여 등숙율이 향상되고 증수되었으나 통일에 있어서는 기비중점으로 질소를 시용하여 영화를 많이 확보하여도 등숙율저하가 적고 오히려 증수되였다. 14. 진흥은 만식적응성이 비교적 크나 통일은 조식효과가 크고 만식하면 출수가 지연되고 등숙온도가 낮아져서 등숙율과 수량이 떨어졌다. 15. 통일은 내비성과 밀식적응성이 커서 다비밀식조건에서 그 다수성을 발휘하는 특성을 가졌으며 주수 및 묘수증가에 의하여 수전일수가 단축되고 등숙률이 향상되었다. 16. 재식거리를 좁히고 어느 정도 주당묘수를 늘리면 강세분얼비율이 높아졌다. 17. 인산은 저온시에는 등숙율을 상당히 향상시켰다. 이상을 요약해보면 종래품종들의 등숙향상을 꾀하자면 8월20일이전에 출수시켜야 하며 10a당 질소 7.5kg 이상의 과다한 기비를 억제하고 후기중점으로 시비하여 동화효율을 높여야할 것이다. 한편 통일은 곡립이 세장하고 식물체가 작고 뭉툭한 등 종래품종과 판이한 외부형태와 더불어 그 생리생태적 특성도 상이한 점이 많으므로 등숙립선별, 도정 및 재배법상에도 종전품종과 다른 고려가 있어야 할 것이다. 즉 등숙립 선별기준에 대하여는 통일의 비중별 입수분포 및 정현비율로 보아 종래의 등숙립 선별기준인 비중 1.06 보다는 0.96을 적용하는 것이 합리적이고 도정상으로는 통일의 곡립이 세장하고 폭 및 두께가 작다는 것을 고려하여야 한다. 재배법에 있어서 통일의 등숙률이 낮은 원인이 주로 약세분얼이 많고 저온하에서는 출수가 지연되고 뿌리와 엽신의 기능이 저하되며 불임이 증가되는 것으로 판명되었고 그 외에 통일은 다비밀식적응성이 크므로 등숙향상과 수량 증대를 위해서는 적극적인 방법으로서 우선 견실하고 큰 묘를 가능한 한 조식하고 다비밀식상태로 재배하되 충분한 기비를 시용하고 묘수를 3본 내외로 심고 인산 및 규산등을 충분히 시용하여야 할 것이다.

• 한국작물학회지
• /
• 제4권1호
• /
• pp.31-71
• /
• 1968

수도원연품종간 교배육종에 있어서 지리적 생태품종 간의 잡종 초기 세대의 생육일수와 불임성의 변이에 관한 지견을 얻고자 대표적인 Indica와 Japonica 그리고 그중간형인 Beaumont 품종과 Ponlai등 7개 품종을 상호 교배하여 IRRI(북위 $14^{\circ}$17')에서 $F_1$ 을 10시간 및 14시간 조명하에서 $F_2$를 단일건계의 자연일장하에서 재배하고 수원(북위 $37^{\circ}$16')에서도 $F_1$을 10시간 및 자연일장하에, $F_2$ 및 $F_3$을 자연일장하에 각각 재배하고 출수일수 및 불임율을 조사 연구하였다. 1. 출수일수 : 1) $F_1$들은 10시간 단일하에서는 조생이 만생에 대해 우성 내지 초월성으로 나타났고 14시간 장일하에서는 우성 내지 불완전 우성으로 나타났는데 IRRI와 수원에서 모두 같았다. 2) IRRI에서 단일시기에 재배된 $F_2$는 조생이 만생에 대해 불완전우성이며 분리는 연속적이었다. 수원에서 조기재배된 $F_2$는 대부분의 조합에서 조생이 불완전우성이거나 중간성으로 적기 재배된 $F_2$는 대부분의 조합에서 만생이 불완전 우성이거나 중간성으로 나타났다. 3) 극단의 만생간의 조합에 있어서도 유효 출수 가능한 초월분리 개체가 있었다. 4) 기본영양생장성이 긴 품종들의 조합에서는 변이의 폭이 넓었고 신품종의 평균과 친계열평균 변이계수와에는 높은 상관이 있었다. 5) $F_1$이나 중간친으로 $F_2$집단의 평균 출수일수를 예측할수 있으며 $F_2$평균과 $F_3$계통 평균과에도 높은 상관이 있었으나 IRRI에서 재배된 $F_2$개체와 수원에서 재배된 $F_3$계통간의 상관은 없었다. 6) IRRI에서 재배된 $F_2$와 수원에서 재배된 $F_3$계통간에는 통계학적으로 조정된 heritability가 매우 낮아서 출수일수에 관한 선발의 효과는 단일감응성 품종에 대해서는 기대하기 어렵다. 7) $F_1$ 및 $F_2$의 평균 출수일수는 정역교배간에 차가 없거나 극소하였다. 8) 잡종의 단일감응성 측정치를 친계열별 평균과 이 평균으로 부터의 편차로 구분 계산하여 단일감응성에 기여하는 양친들의 효과에 따라 친품종을 감응성품종과 비감응성 품종을 구분 할 수 있었다. 9) 단일감응성은 $F_1$이 양친보다 높으며 $F_2$, $F_3$으로 세대가 진전함에 따라 낮아진다. 10) 온도차에 따른 $F_1$의 출수일수 반응은 양친품종보다 작으며 장일과 단일하에서의 온도반응의 차이는 품종에 따라 차이가 있었다. 2. 불임율 : 1) IRRI에서도 수원에서도 다같이 $F_1$의 불임은 조합에 따라 차가 크며 친품종의 불임율과 상관이 없었다. 또 10시간 단일하에서는 14시간 장일하에서 보다 불임율이 높았다. 2) $F_1$에서 불임이 높았던 조합이 $F_2$에서도 높았으며 단일감응성이 높은 품종과 고온감응성이 높은 품종간의 조합에서 불임이 높았고 그 분산의 폭도 넓었다. 3) $F_2$ 평균은 $F_1$보다 낮으며 $F_3$계통들의 평균은 $F_2$평균보다 낮아 세대가 진전됨에 따라 불임율이 낮아지며 $F_3$에서는 조합간의 차가 현저하지 못하게 되었다. 4) $F_2$에 있어서는 화분불임과 종실불임간에 상관이 미약하였다. 5) $F_1$과 $F_2$평균의 불임율에는 정역교배간에 차가 없었다. 6) 잡종 불임을 잡종강세에서와 같이 Griffing의 방법에 따라 조합 능력 검정을 한 결과 SCA 효과는 GCA효과보다 컸는데 SCA효과가 특히 큰 것은 감광성이 높은 품종과 감온성이 높은 품종간의 조합들이였다. 7) IRRI에서 재배된 $F_2$와 수원에서 재배된 $F_3$과에는 불임에 관해 상관이 낮으며 $F_3$에서는 $F_2$에서보다 불임율이 낮아졌다. 8) $F_2$에 있어서 출수일수와 불임율과에는 상관이 거의 없었다.

• 농촌의학ㆍ지역보건
• /
• 제20권1호
• /
• pp.1-13
• /
• 1995

본 연구는 변화되고 있는 지역사회보건사업의 요구에 따른 연도별 보건소 간호사들의 역할 변화, 역할 수행에 따른 장애요인 및 간호업무 수행과 관련하여 인지하는 직무만족도를 파악하고자 1992년 3월 19일부터 4월 11일까지 경상남도 보건간호사 270명을 대상으로 설문조사한 결과는 다음과 같다. 보건간호사들이 수행한 최우선 보건사업은 1970년 이전에는 가족계획사업, 1970 - 1979년대에는 간호업무, 1980 - 1989년대에는 모자보건사업, 1990 - 1992년대에는 간호업무이었다. 가족계획사업 내용의 우선순위는 1970년 이전에는 자궁내장치 삽입 권장과 경구피임약 또는 콘돔 배부에 역점을 두었으며 그 이후로는 가족계획 홍보를 우선으로 했다. 모자보건사업 내용의 우선순위는 1970년 이전부터 임부등록에 많이 두었으며 그 다음으로 산전진찰과 예방접종에 치중한 것으로 나타났다. 결핵관리사업 내용의 수선순위를 보면 각 년대마다 신환자 발견 등록에 치중하였으며 그 다음으로 환자관리 및 투약 주사에 비중을 두었다. 간호업무 냉용의 우선순위를 보면 1970년대 이전에는 순회진료에 역점을 두었으며 그 다음으로 주사 및 투약에 치중하였다. 전염병관리 내용의 우선순위는 1970년 이전부터 1순위였으며 그 다음으로 투약 및 주사에 치중하였다. 1990-1992년대에는 상담 및 교육이 2순위로 나타났다. 노인보건사업 내용의 수선순위가 1979년대 이전부터 순회진료가 1순위였으며 그 다음으로 검진보조가 2순위로 나타났다. 사업별 업무수행시 장애요인을 보면 가족계획 사업에서는 주민의 이해부족이 28.8%, 예산부족이 13.6%, 보건행정체계 미비가 11.9%였으며, 결핵사업에서는 주민의 이해부족이 32.5%, 업무과다(인원부족)가 15.6%, 기술이나 지식의 부족이 13.0%였다. 업무과다(인원부족)와 시설 장비의 부족이 각각 15.6%, 주님의 이해부족이 13.0%였다. 직급별 보건간호사의 직무만족도에서 경력이나 능력에 비해 승진기회여부는 불만이다가 8,9급이 64.7%로 높았으며 전문직 발전의 기회는 없다가 6,7급이 67.7%, 8,9급이 64.0%로 높았다. 보건업무에 필요한 물품과 시설의 만족여부에서 하위급으로 내려갈수록 만족도는 낮았으며 보수의 만족도에서는 적당하다가 6,7급이 64.7%, 너무 작다가 8,9급이 53.0%로 높았다. 직급별 보건간호사의 직업 긍지 만족도에서 직급이 높을수록 직업적 긍지의 직무만족도는 높았다. 직급별 현 직급에 대한 만족도는 하위급으로 내려갈수록 만족하는 사람의 비율은 높아졌다. 보건간호사의 경력(년)별 직무만족도에서 보건간호사 경력이 많을수록 직급, 승진기회, 전문직 발전의 기회에 대한 직무만족도는 낮게 나타났다. 보건간호사의 경력(년)별 직업 긍지 만족도에서 보건간호사 경력이 많을수록 직업적 긍지의 직무만족도는 높게 나타났다. 대상자의 37.6%가 이직할 의사가 있다고 하였으며, 승진기회의 부족, 근무여건의 불만이 이직 이유였다. 하력과 경력은 직무만족도 사이에 유의한 상관관계가 없었으며 직급이 낮을수록 직무만족도는 낮아 유의한 관련성을 나타내었다. 1차 보건의료사업을 수행토록 하기 위해서는 보건간호사의 인식이나 주민들의 인식을 새롭게 하기 위한 홍보활동 및 교육이 더 주어져야 할 것이며 보건간호사의 승진기회 및 직급에 대란 불만도가 높기 때문에 보건간호사의 승진제도개선 및 직무영역확대가 고려되어야 할 것이다. 그래서 간호업무에 만족할 수 있는 제도개선에 대해 고려해야 할 것으로 생각된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Nuclear Medicine and Molecular Imaging
• /
• 제42권3호
• /
• pp.235-245
• /
• 2008

목적: 간암은 치명적인 질환으로 유전자 치료가 기존 치료의 대체적 치료로 기대되고 있으며, 이러한 치료법의 발달과 함께 유전자의 발현을 평가할 수 있는 보고 유전자 시스템의 필요하다. 그 중 HSV1-tk 유전자는 보고 유전자로서 필요한 조건을 두루 만족시키고 있을 뿐만 아니라 별도의 치료유전자를 따로 이입할 필요가 없다는 장점을 가지고 있어 가장 많이 사용되는 방법이다. 이 연구는 간암의 유전자 치료를 위해 간암 동물 모델에서 유전자로 HSV1-tk를 사용하고 보고 기질로 방사성 요오드 표지 2'-fluoro-2'-deoxy-1-${\beta}$-D-arabinofuranosyl-5-iodouracil (FIAU)를 사용하여 소동물 양전자 방출영상(positron emission tomography, PET)을 얻어 비침습적 생체 유전자 발현 영상의 가능성을 확인하고 자 하였다. 대상 및 방법: HSV1-tk 보고 유전자 이입 간암세포주인 MCA-tk와 MCA 세포주를 이용하여 in vitro 상에서의 [$^{125}I$]FIAU의 섭취실험과 섭취량과 발현량의 상관성평가를 위해 세포수 백분율에 따른 섭취실험을 실시하였다. 피하 간암 동물모델을 이용하여 [$^{125}I$]FIAU의 생체분포를 평가하였으며 [$^{125}I$]FIAU를 이용하여 소동물 PET을 통한 생체영상을 분석하였다. 결과: HSV1-tk 유전자가 이입된 MCA-tk 세포에서는 특이적인 동위원소의 집적이 발생하였으며 대조군인 MCA에서는 거의 집적이 이루어지지 않았다. 섭취 후 480 분에서 두 세포주의 섭취비는 15 배로 나타났다. MCA-tk 세포주의 백분율이 증가함에 따라 [$^{125}I$]FIAU의 섭취량도 직선적 상관관계($R^2=0.9644$)에 따라 증가하여 기질의 섭취량이 유전자 발현량을 잘 반영하고 있음이 확인되었다. 피하 종양 동물모델의 생체분포 결과 [$^{125}I$]FIAU는 초기에 신장으로 빠르게 배출되며 1 시간 이후 생체내 deiodinase에 의하여 분해되어 위와 갑상선의 섭취가 증가된 값을 보였다. MCA-tk 종양 대 혈액 비와 MCA-tk 종양 대 근육 비는 투여 후 24 시간 사이에 최대 641의 값을 나타내었다. 또한 HSV1-tk 유전자가 발현하지 않은 MCA종양에 비하여 MCA-tk 종양은 192.7 배 높은 섭취를 보여 [$^{125}I$]FIAU의 섭취는 HSV1-tk 유전자 발현에 특이적임을 확인하였다. MCA-tk 종양 대 간의 집적의 경우에도 초기 1시간에 13.8 배, 4 시간에 66.8 배, 24 시간에 혈액 비와 비슷한 정도의 588.3배 이상의 대조도를 보여 주었다. [$^{124}I$]FIAU를 보고 기질로 사용한 소동물 PET 생체영상에서 대조군인 MCA 종양과 보고 유전자가 이입된 MCA-tk 종양에의 집적이 차이가 매우 큰 대조도를 보여주었으며 생체분포 결과와 일치하는 양상을 나타내었다. 결론: $^{125}I$-FIAU가 세포 섭취율 시험과 생체 분포에서 MCA-tk 종양에 높은 집적을 나타내었고 $^{124}I$-FIAU를 이용한 소동물 PET 영상에서 MCA-tk 종양이 표적장기인 간이나 MCA 종양에 비하여 매우 높은 대조도를 나타냈다. 향후, 간암의 유전자 치료에서 FIAU은 HSV1-tk를 보고 유전자로 사용할 때 적절한 기질로서 비침습적으로 핵의학 영상을 이용한 유전자 발현의 평가를 가능하게 할 수 있을 것으로 기대된다.