• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.19-24
• /
• 2014

PURPOSES : The study objective was to evaluate rheology and physical properties of SBS-modified warm-mix asphalt (WMA) binders in comparison with hot-mix asphalt (HMA) binders. METHODS : Four different SBS polymers were used to prepare polymer-modified asphalt (PMA) binders, and three different warm-mix additives (WAD) were used to prepare a total of 12 WMA PMA binders. The kinematic viscosity was measured at 115, $135^{\circ}C$. The PG was determined using DSR and BBR. The pass/fail (P/F) temperatures for high and low PG grading were evaluated for HMA PMA and WMA PMA binders. RESULTS : PG 76-22 binders could be prepared by modifying the base binder (PG 64-22) using 4.5 wt% of SBS. The kinematic viscosity (KV) of SBS PMA was increased by 3 times higher than that of base asphalt. The SBS PMA with WAD showed 10% lower KV than that of the normal SBS PMA at $115^{\circ}C$ The high P/F temperatures showed almost no difference between HMA PMA and WMA PMA binders. The high P/F temperature showed very high correlations with KV ($R^2$ > 0.97). The result of SBS modification caused increase of low P/F temperature by $2.7^{\circ}C$ on average. CONCLUSIONS : Since the PMA with WAD showed 10% lower KV than normal (HMA) PMA at $115^{\circ}C$, reducing PMA mixture temperature down to a WMA level was possible in this study. The higher KV binders showed the higher P/F temperature. There was almost no change in high P/F temperature due to the use of WAD. The SBS PMA, showing an increased low P/F temperature, might show somewhat poorer performance at low-temperature, even though the lower PG grade was staying at the same level, i.e., $-22^{\circ}C$.

• Journal of the Society of Disaster Information
• /
• v.3 no.1
• /
• pp.21-35
• /
• 2007

The principal objective of this research is to evaluate the laboratory mechanical characteristics of color asphalt binders and mixtures. The dynamic shear rheometer (DSR) tests were performed to analyze the viscous and elastic behavior of asphalt binders. Various tests were also conducted to investigate the laboratory performance characteristics of color asphalt mixtures. The test results revealed that the values of $G^*$ and ${\delta}$ of modified color binders were higher than those of the conventional binders at low temperatures. These results are expected to increase the thermal cracking resistance of asphalt mixtures at low temperatures. It should be noted that the color asphalt mixtures with modified asphalt binder can be widely used as a common pavement material with a proper mix design.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.204-205
• /
• 2017

In this study, flowability and strength on ultra high performance concrete(UHPC) pre-mixed binders with fiber was investigated. The flow of UHPC with pre-mixed binders was higher than that of seperate mixing conditions. The UHPC using PVA fiber with high specific surface area showed a low flow compared to steel fiber. An pre-mixing method led to improved strength of UHPC and low deviation of specimens due to dispersion effect of each materials.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.55-60
• /
• 2009

Stabilization treatment is one of processes for wastes and their components to reduce their toxicity and migration rates to surroundings. Inorganic binders such as calcium hydroxide, blast furnace slag and red mud were tested for their potential applicability to in-situ stabilization of heavy metal contaminated tailings in the abandoned metal mines. Columns(150mm dia. ${\times}$ 450mm length) filled with mixtures of inorganic binders and tailing from the Geumjang mine with various mixing ratios of binders to tailings, 5%, 7% and 9% were applied artificial rainfall tests for 28 days. Effluents from columns filled with calcium hydroxide and tailing showed high pH's of ~12.5 and a increasing trend of concentration in Pb and Zn with a significant decrease in permeability in terms of elapsed days. Those with burning slag and tailing showed pH's of ~8.5 and significantly low concentrations in heavy metals with a stable permeability. In case of red mud, effluents showed significantly low concentrations in heavy metals but a decreased permeability with pH's of ~10.5. Conclusively, this basic study suggests burning furnace slag be a potential stabilizer for effective treatment of heavy metal contaminated mine tailings.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.199-204
• /
• 2010

The objective of this paper is to present new binder systems that can be applied in composite rocket propellants, to improve properties of these propellants not only for better performance, but also to reduce waste and pollution. These novel systems are based on the thermoplastic elastomer (TPE) binders, which consists of copolymers with the addition of a plasticizer, and additives. The effect of the novel TPE binder systems on the burning rate and mechanical properties of AP based propellants was studied. The results show that propellants based on the novel TPE binders have a better energy performance than today's workhorse hydroxyl terminated polybutadine/ammonium perchlorate propellant, exhibit a similar range of burning rate, possess appropriate mechanical properties, and exhibit good processing and aging characteristics at low cost.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.3
• /
• pp.29-38
• /
• 2020

Since some warm-mix asphalt (WMA) concretes were known to show poorer rut resistance than the hot-mix asphalt (HMA) concretes, many studies were performed in efforts of improving its performance at high temperature. The reason is assumed to be due to the moisture remaining in aggregates dried at lower temperature. Therefore, not only the rut resistance, the crack resistance of WMA concrete was also in question. In this study, fatigue life of WMA concrete was evaluated in comparison with HMA using 3-point bending (3PB) beam test. The asphalt mixtures were prepared based on Korean mix-design guide using a 13 mm dense-graded aggregate and 6 binders; two HMA binders and four WMA binders. By 3PB fatigue test, normal (unmodified) and polymer-modified WMA concretes were evaluated in comparison with normal and polymer-modified HMA concretes at a low temperature (-5℃). The results showed that most of WMA concretes showed longer fatigue lives than HMA concretes, even though the same PG binders were used for HMA and WMA. This result indicates that the WMA concretes have stronger resistance against fatigue cracking than HMA at the low temperature, and this result is in contrast to the high-temperature performance test.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.55-63
• /
• 2015

PURPOSES : The objective of this study is to investigate the properties of recycled asphalt binders with five different rejuvenators, in order to evaluate the applicability of the recycled asphalt binders compared with the original asphalt binder. METHODS : In order to simulate recycled asphalt binders, fresh asphalt binders are aged by various Superpave aging procedures, such as the rolling thin-film oven (RTFO) and the pressure aging vessel (PAV). Then, selected rejuvenators are added to the aged asphalt binders in the amount of 5%, 10%, and 15%. The asphalt binder properties are evaluated by the dynamic shear rheometer (DSR), the rotational viscometer (RV), and the bending beam rheometer (BBR). In this study, AP-5 (penetration grade 60-80, PG 64-16) asphalt binder is used. A total of five types of rejuvenators are employed. RESULTS AND CONCLUSIONS : When considering aged asphalt without a new asphalt binder, it seems that the percentage of rejuvenator used in Korea is a bit too low, and that it fails to possess the characteristics of the original binder. From the current practice of evaluating the properties of recycled binder based on penetration ratio only, the amount of rejuvenator required is similar for the long-term-aged binder, but is excessive for the longest-term aged binder, causing deterioration of workability and stiffness of the recycled binder.

• Geomechanics and Engineering
• /
• v.21 no.4
• /
• pp.337-348
• /
• 2020

Tropical organic soils having more than 65% of organic matters are named "peat". This soil type is extremely soft, unconsolidated, and possesses low shear strength and stiffness. Different conventional and industrial binders (e.g., lime or Portland cement) are used widely for stabilisation of organic soils. However, due to many factors affecting the behaviour of these soils (e.g., high moisture content, fewer mineral particles, and acidic media), the efficiency of the conventional binders is low and/or cost-intensive. This research investigates the impact of different constituents of cement-sodium silicate grout system on the compressibility behaviour of organic soil, including settlement and void ratio. A microstructure analysis is also carried out on treated organic soil using Scanning Electron Micrographs (SEM), Energy Dispersive X-ray spectrometer (EDX), and X-ray Diffraction (XRD). The results indicate that the settlement and void ratio of treated organic soils decrease gradually with the increase of cement and kaolinite contents, as well as sodium silicate until an optimum value of 2.5% of the wet soil weight. The microstructure analysis also demonstrates that with the increase of cement, kaolinite and sodium silicate, the void ratio and porosity of treated soil particles decrease, leading to an increase in the soil density by the hydration, pozzolanic, and polymerisation processes. This research contributes an extra useful knowledge to the stabilisation of organic soils and upgrading such problematic soils closer to the non-problematic soils for geotechnical applications such as deep mixing.

• 한국도로학회:학술대회논문집
• /
• 2004.10a
• /
• pp.131-136
• /
• 2004

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1451-1454
• /
• 2005

We report effects of inorganic binder on the emission properties of CNT paste for low cost and high low-cost and large area field emission devices or displays. Two types of photosensitive carbon nanotube (CNT) paste were formulated by using of glass frit and spin on glass (SOG) as an inorganic binder and investigated their emission properties according to inorganic binders and firing conditions.