• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제12권4호
• /
• pp.267-274
• /
• 2014

The first Low- and Intermediate-Level Waste (LILW) disposal facility with 6 silos has been constructed in granite host rock saturated with groundwater in Korea. A two-dimensional numerical modeling on gas migration was carried out using TOUGH2 with EOS5 module in the disposal facility. Laboratory-scale experiments were also performed to measure the important properties of silo concrete related with gas migration. The gas entry pressure and relative gas permeability of the concrete was determined to be $0.97{\pm}0.15bar$ and $2.44{\times}10^{-17}m^2$, respectively. The results of the numerical modeling showed that hydrogen gas generated from radioactive wastes was dissolved in groundwater and migrated to biosphere as an aqueous phase. Only a small portion of hydrogen appeared as a gas phase after 1,000 years of gas generation. The results strongly suggested that hydrogen gas does not accumulate inside the disposal facility as a gas phase. Therefore, it is expected that there would be no harmful effects on the integrity of the silo concrete due to gas generation.

• Journal of electromagnetic engineering and science
• /
• 제8권2호
• /
• pp.76-83
• /
• 2008

A low power(9 mW) highly-digitized 2.4 GHz receiver for sensor network applications(IEEE 802.15.4 LR-WPAN) is realized by a $0.18{\mu}m$ CMOS process. We adopted a novel receiver architecture adding an intermediate frequency (IF) level detection scheme to a low-power complex fifth-order continuous-time(CT) bandpass L:tl modulator in order to digitalize the receiver. By the continuous-time bandpass architecture, the proposed $\Sigma\Delta$ modulator requires no additional anti-aliasing filter in front of the modulator. Using the IF detector, the achieved dynamic range(DR) of the over-all system is 95 dB at a sampling rate of 64 MHz. This modulator has a bandwidth of 2 MHz centered at 2 MHz. The power consumption of this receiver is 9.0 mW with a 1.8 V power supply.

• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.59-63
• /
• 2011

Conventional noise reduction filtering schemes realize limited improvements of the peak signal-to-noise ratio (PSNR) in the low-level noisy images. The flatness degree and the edge information are effectively used to estimate the noise volume. We propose a noise estimator for reducing noise in the AWGN (additive white gaussian noise) corrupted images using three intermediate image maps (FGM(flatness gray map), FIM(flatness index map), NEM(noise estimate map)). The proposed noise estimator is fed into the conventional noise reduction filters as a pre-processor. The performance of noise reduction is tested in the various AWGN corrupted images.

• Asia Pacific Journal of Corpus Research
• /
• 제4권2호
• /
• pp.1-39
• /
• 2023

Recent research in usage-based Second Language Acquisition has provided new insights into second language (L2) learners' development of formulaic language (Wulff, 2019). The current study examines the use of phrase-frames, which are recurring sequences of words including one or more variable slots (e.g., it is * that), in written and oral production data from Asian learners of English across four proficiency levels (beginner, low-intermediate, high-intermediate, advanced) and native English speakers. The variability, predictability, and discourse functions of the most frequent 4-word phrase-frames from the written essay and spoken dialogue sub-corpora of the International Corpus Network of Asian Learners of English (ICNALE) were analyzed and then compared across groups and modes. The results revealed that while learners' phrase-frames in writing became more variable and unpredictable as proficiency increased, no clear developmental patterns were found in speaking, although all groups used more fixed and predictable phrase-frames than the reference group. Further, no developmental trajectories in the functions of the most frequent phrase-frames were found in both modes. Additionally, lower-level learners and the reference group used more variable phrase-frames in speaking, whereas advanced-level learners showed more variability in writing. This study contributes to a better understanding of the development of L2 phraseological competence.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제9권2호
• /
• pp.87-92
• /
• 2011

This paper introduces the policy and regulations on very low level waste (VLLW) management in China. Given the important decommissioning and site restoration program of the old facility, it is considered necessary to create a new disposal facility dedicated to VLLW. Many general design principles are in common with to the disposal facility for low and intermediate level waste (LILW), namely the isolation of the waste by means of a multibarrier system, but using bentonite and/or high density polyethylene membranes instead of the generalized use of concrete barriers. The design of the facility is consistent with the design of disposal facilities for hazardous waste. The engineering design of two VLLW disposal facilities is introduced.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.694-698
• /
• 2006

This paper presents an optimal design process using beads on a body panel to improve interior noise of a passenger vehicle. Except modification of structural members, it is difficult to find effective countermeasures that can work for the intermediate frequency range from 100 Hz to 300 Hz which lies between the booming and low medium frequency. In this study, it is a major goal to find additional counter-measures for this intermediate frequency range by performing optimal design of beads on body panels. The proposed method for design optimization consists of 4 sub-steps, that is, a) problem definition, b) cause analysis, c) countermeasure development and d) validation. The objective function is minimization of interior noise level. The major design variables are the geometrical shape of a bead and combination of beads on the critical panels. Sensitivity analysis and optimization are performed according to the predefined process for an optimal design. It is verified that the proposed design decreases the level of noise transfer function above 5 dB.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1199-1209
• /
• 2023

Where concrete structures are designed to have a service life of over 100 years, their performance must be monitored, for the prediction models available are fraught with uncertainties that need to be eliminated. The present study was conducted to meet that need by monitoring a pilot structure for low and intermediate radioactive waste storage. Long-term operation of the sensors was observed to be adequate to determine the value of the parameters that characterise structural durability, such as corrosion current density. The parameters analysed were correlated to calculate their reciprocal impact: where applied in conjunction with artificial intelligence tools, temperature, for instance, was found suitable for finding activation energy and expansion coefficients and detecting outliers. The results showed the pilot structure to perform satisfactorily.

• Proceedings of KOSOMES biannual meeting
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.95-95
• /
• 2018

• Korean Journal of Materials Research
• /
• 제23권10호
• /
• pp.568-573
• /
• 2013

The deformation properties of a TiC-Mo eutectic composite were investigated in a compression test at temperatures ranging from room temperature to 2053 K and at strain rates ranging from $3.9{\times}10^{-5}s^{-1}$ to $4.9{\times}10^{-3}s^{-1}$. It was found that this material shows excellent high-temperature strength as well as appreciable room-temperature toughness, suggesting that the material is a good candidate for high-temperature application as a structure material. At a low-temperature, high strength is observed. The deformation behavior is different among the three temperature ranges tested here, i.e., low, intermediate and high. At an intermediate temperature, no yield drop occurs, and from the beginning the work hardening level is high. At a high temperature, a yield drop occurs again, after which deformation proceeds with nearly constant stress. The temperature- and yield-stress-dependence of the strain is the strongest in this case among the three temperature ranges. The observed high-temperature deformation behavior suggests that the excellent high-temperature strength is due to the constraining of the deformation in the Mo phase by the thin TiC components, which is considerably stronger than bulk TiC. It is also concluded that the appreciable room-temperature toughness is ascribed to the frequent branching of crack paths as well as to the plastic deformation of the Mo phase.

• Proceedings of KOSOMES biannual meeting
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.96-97
• /
• 2018