• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.338-343
• /
• 2015

To prevent an interfacial reaction between the anode and the electrolyte layer during the conventional high-temperature co-firing process, an anode-supported type cell with a thin-film electrolyte was fabricated by low-temperature ceramic thick film coating process. Ni-GDC cermet composite was used as the anode material and YSZ was used as the electrolyte material. Open circuit voltage and maximum power density were found to strongly depend on the surface uniformity of the anode functional layer. By optimizing the microstructure of the anode functional layer, the open circuit voltage and maximum powder density of the cell increased to 1.11 V and $1.35W/cm^2$, respectively, at $750^{\circ}C$. When a GDC barrier layer was applied between the YSZ electrolyte and the LSCF cathode, the cell showed good stability, with almost no degradation up to 100 h. Anode-supported type SOFCs with high performance and good stability were fabricated using a coating process.

• Journal of the Korean Wood Science and Technology
• /
• 제51권4호
• /
• pp.270-282
• /
• 2023

Lower termites need symbiotic microbes for cellulose digestion. Elizabethkingia miricola strain BM10 has been proposed as a symbiotic microbe that assists in low-temperature digestion and metabolism of Reticulitermes speratus KMT1, a termite on Bukhan Mountain, Seoul, Korea. In E. miricola strain BM10, β-glucosidase genes expressed at 10℃ were identified, and the psychrophilic enzymatic characteristic was confirmed by heterogeneously expressed proteins. Crude β-glucosidase in the culture broth of E. miricola strain BM10 showed specific enzymatic properties, and its substrate affinity was 4.69 times higher than that of Cellic CTec2. Among the genes proposed as β-glucosidase, two genes, bglB_1 and bglA_2, whose gene expression was more than doubled at 10℃ than at 30℃, were identified. They were heterogeneously expressed in Escherichia coli and identified as psychrophilic enzymes with an optimal reaction temperature of about 20℃-25℃. In this study, E. miricola strain BM10, a symbiotic bacterium of lower termites, produced psychrophilic β-glucosidases that contribute to the spread of the low-temperature habitat of a lower termite, R. speratus KMT1.

• 폴리머
• /
• 제38권2호
• /
• pp.171-179
• /
• 2014

우수한 성능을 지닌 대형 구조의 섬유강화 고분자(FRP) 복합재료 제품을 제조하기 위해 저온 경화형 프리프레그 개발이 활발히 진행되고 있다. 본 연구에서는 저온 경화형 프리프레그 제조에 적합한 매트릭스 수지를 확보하기 위하여 에폭시 수지, 경화제, 경화 촉진제로 구성된 저온 경화형 에폭시 수지 조성물의 경화거동 및 화학유변학을 고찰하였다. 경화반응 특성은 시차주사열량분석법과 유변물성측정법을 활용하여 승온 및 등온 조건에서 분석하였다. 연구 결과 매트릭스 수지로 제안된 저온 경화형 에폭시 수지 조성물은 $80^{\circ}C$에서 3시간에 경화시킬 수 있었고, 80과 $90^{\circ}C$에서의 젤화 시간은 각각 120분과 20분인 것으로 나타났다. 저온 경화형 수지를 경화시킨 수지 경화물의 열적, 기계적 물성은 고온 경화형 수지 경화물의 물성과 거의 동등하였다.

• 한국생활과학회지
• /
• 제19권4호
• /
• pp.709-717
• /
• 2010

This study investigated the properties and functions of wool and silk dyed with Catechu by examining the effects of dying conditions such as dye concentration, dying temperature, dyeing time, pH level and pre-mordants. These conditions were examined in relation to dye uptake and color changes, washing fastness, light fastness, ultraviolet-cut ability and antimicrobial ability of the dyed fabrics. Catechu showed good affinity to silk fiber. Langmuir adsorption isotherm was obtained, and so it was considered that ionic bondings are formed between Catechu and protein fiber. As the dyeing time and temperature is increased, the dyeability of both silk and wool fabrics also increases. At high temperatures the color of dyed fabrics changes from Y and YR to R. Wool is effective in using Al, Cu, Fe mordant, while silk is effective only in using only Cu mordants. The dyeability was shown to be improved at low pH levels. Additionally, both washing fastness and light fastness were shown to be low. However, the fabric color gradually changed to red was due to mailard reaction of catechol tannin causingby repeated washing and sunlight. The ultraviolet-cut ability was improved for cotton fabric dyed with Catechu. Also, dyed fabric with Catechu showed very good antimicrobial abilities at 99.9%.

• KSBB Journal
• /
• 제9권2호
• /
• pp.127-132
• /
• 1994

Amyloglucosidase를 이용하여 설탕으로부터 fructooligosaccharides의 생산조건을 최적화하였다. Amyloglucosidase의 두 가지 활성 중 가수분해 활성에 대한 최적반응 pH 및 온도는 각각 4.0, $75^{\circ}C$ 이었고, 올리고당 합성에 대한 활성은 pH 5.5, 온도 $55^{\circ}C$에서 최고치를 나타내었다. 저농도 설탕에서는 가수분해 활성이 대단히 강하여 fructooligosaccharides의 합성능이 매우 낮았고, 550g/l 이상의 설탕을 기질로 이용하였을 때 최적반응조건에서 최대 41%의 fructooligosaccharides를 생산할 수 있었다. 또한 Amyloglucosidase는 설탕뿐만 아니라 fructooligosaccharides도 기질로 이용할 수 있었다.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.659-662
• /
• 1995

Co-ferrite ($CoO-Fe_{2}O_{3}$) thin films have been prepared by two ways of low temperature solid reaction including oxidation process, being based on $Co-layer/{\alpha}-Fe_{2}O_{3}$ films and $Co-layer/Fe_{3}O_{4}$ films. Magnetic properties of both Co-ferrite films have been measured and compared. The samples from $Co-layer/Fe_{3}O_{4}$ films have a large coercive force in the direction perpendicular and have a great poler kerr rotation angle at wavelength 700 nm than ones from $Co-layer/{\alpha}-Fe_{2}O_{3}$ films. The typical magnetic properties are as follows; saturation magnetization $4{\pi}Ms$, 2.9 kG; remnant magnetization $4{\pi}Mr$, 2.0 kG; coercive force Hc, 4.0 kOe; kerr rotation angle ${\PHI}k$, 0.39 deg($\lambda\;=\;700\;nm$); and initial magnetization energy E, $3.3\;{\times}\;10^6\;erg/\textrm{m}^3$, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.264-264
• /
• 2012

As an environment-friendly alternative energy resource, ethanol may be used to obtain hydrogen, a clean energy source. Thus, studies on catalytic reactions involving ethanol have been studied to understand the underlying principles in the reaction mechanism using various oxide-supported catalysts. Among them, Au-based catalysts have shown a superior activity in producing hydrogen gas. In the present study, Au/$TiO_2$ catalysts were prepared by deposition-precipitation method to understand their catalytic activities toward ethanol and acetaldehyde with increasing gold loading, especially at the very low Au loading regime. A commercially available $TiO_2$ (Degussa P-25) was employed and the Au loading was varied to 0, 0.1, 0.5, and 1.0 wt% respectively. The catalysts showed characteristic x-ray diffraction (XRD) features at $2{\theta}=78.5^{\circ}$ that could be assigned to the presence of gold nanoparticles. Its reactivity measurements were performed under a constant flow of ethanol and acetaldehyde at a flow rate of ${\sim}0.6{\mu}mol/sec$ and the substrate temperature was slowly raised at a rate of 0.2 K/sec. We observed that the overall reactivity of the catalysts increased with increasing Au loading along with selectivity favoring dehydrogenation to product hydrogen gas. In addition, we disclosed various reaction channels involving competitive reaction paths such as dehydrogenation, dehydration, and condensation. In addition, subsequent reactions of acetaldehyde obtained from dehydrogenation of ethanol, were found to occur and produce butene, crotonaldehyde, furan, and benzene. Based on the results, we proposed overall reaction pathways of such reaction channels.

• 한국수소및신에너지학회논문집
• /
• 제34권4호
• /
• pp.327-333
• /
• 2023

The water gas shift reaction was carried out using the commercial catalyst pellet and the simulated gases expected to occur from waste plastic gasification. In the water gas shift reaction, the high temperature shift reaction and the low temperature shift reaction were continuously performed with CO:H₂O ratio of 1:2, 1:2.5, and 1:3, and the CO conversion and H₂ increase rate were evaluated. The H₂ increase rate increased in order to CO:H₂O ratio of 1:3 > CO:H₂O ratio of 1:2.5 > CO:H₂O ratio of 1:2. The CO conversion showed a high value of more than 97% at each CO:H₂O ratio. The water gas shift reaction at a CO:H₂O ratio of 1:3 showed the highest H2 increase rate and CO conversion.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.106-109
• /
• 2008

Polyurethane has been one of the most important materials for automobile elastic parts such as bumper, head rest, instrument panel and so on since it covers very wide range of mechanical characteristics with low production costs. The process variables such as formulation of ingredients and mold temperature, mixing speed, etc. can affect the quality of produced polyurethane foams so that process conditions should be determined appropriately. In this study, foaming behaviors of semi-rigid polyurethane were investigated by conducting cup foam tests with 2 major process variables such as environmental temperature and blowing agent content.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3329-3334
• /
• 2007

The purpose of the research is to investigate of diesel spray combustion for simultaneously reduce way NOx and PM. The pressure diesel injection were done into intermediates that are generated by very lean DME HCCI combustion using a RCM. The concentration of intermediate could not be directly measured; we estimated it by CHEMKIN calculation. DME HCCI characteristic is surveyed. Validations of the CHEMKIN calculation were confirmed pressure rise of an experiment and pressure rise of a calculation. Using a framing streak camera captured two dimensional spontaneous luminescence images from chemical species at low temperature reaction(LTR) and high temperature reaction (HTR). Also, the combustion events were observed by high-speed direct photography, the ignition and combustion were analyzed by the combustion chamber pressure profiles.