• Korean Chemical Engineering Research
• /
• 제51권2호
• /
• pp.195-202
• /
• 2013

본 연구에서는 Titanium(IV) sulfate($Ti(SO_4)_2$)와 암모니아수로부터 수열합성법을 이용하여 비교적 낮은 합성온도($80{\sim}100^{\circ}C$)와 상압에서 소성과정을 거치지 않고 $TiO_2$ 분말을 제조하였고, $TiO_2$ 제조 시 반응온도, 반응물의 초기농도, 혼합용액의 pH와 같은 반응조건에 따른 $TiO_2$ 입자의 결정구조와 입자분포, 형상 등과 같은 물리적 특성을 고찰하였다. 제조한 시료는 UV 조사 하에 Brilliant Blue FCF(BB-FCF)의 광분해 실험을 실시하여 광분해 성능과 DRS 분석을 통해 광촉매 활성을 비교하였다. 제조한 시료의 물성은 XRD, SEM, PL, 입도분포 측정을 통하여 확인하였다. Titanium(IV) sulfate($Ti(SO_4)_2$)의 초기농도가 증가할수록 $TiO_2$의 평균 입자크기와 결정화도는 증가하였고 광촉매 활성은 감소하였다. 혼합용액의 pH가 높을수록 평균 입자크기는 감소하였고 광촉매 활성은 증가하였다. 반응온도가 높을수록 결정화도와 광촉매 활성은 증가하였다. 이상의 결과들로부터 $Ti(SO_4)_2$와 암모니아수를 이용한 비교적 낮은 합성온도와 상압에서의 수열합성법으로도 순수한 anatase 결정구조의 $TiO_2$가 제조됨을 확인할 수 있었다.

• KSBB Journal
• /
• 제13권3호
• /
• pp.284-288
• /
• 1998

Production of inulo-oligosaccharides from inulin was carried out with the maximum yield of 94% using a purified endoinulinase from Aspergillus ficcum. The optimum reaction temperature and pH were 55-60$^{\circ}C$ and pH 5.5-6.0, respectively. The Michaelis constant and maximum reaction velocity of the endoinuinase for inulin were 13.27 g/L and 0.13 g/L$.$min at 55$^{\circ}C$, pH 5.5, respectively. Inulin source had no significant effect on oligosaccharide yield and product composition, although initial production rate differed according to inulin origins. The reaction pH was a critical factor in inulo-oligosaccharide production because considerable free monosaccharides were released, decreasing oligosaccharide yield at low pH conditions. An empirical relationship describing the reaction performance was developed from kinetic data: the time to reach maximum oligosaccharide yield (tw) as a function of initial concentration of inulin (lo) and enzyme (Eo); i.e., log tM = -1.025 log Eo - 0.011 l0 + 2.655.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2689-2694
• /
• 2011

Novel 5'-norcarbocyclic adenine and guanine phosphonic acid analogues with 6'-electronegative moiety such as unsaturated C-C bond were designed and synthesized from commercially available 2-methylene-propane-1,3-diol (4). Regioselective Mitsunobu reaction successfully proceeded from an allylic functional group (${\pm}$)-12b at low reaction temperature in polar cosolvent (DMF/1,4-dioxane) to give purine phosphonate analogues (${\pm}$)-13 and (${\pm}$)-20. The purine nucleoside phosphonate and phosphonic acid analogues were subjected to antiviral screening against HIV-1. Guanine analogue (${\pm}$)-23 shows significant anti-HIV activity in PBM cell lines ($EC_{50}=8.1\;{\mu}M$).

• Bulletin of the Korean Chemical Society
• /
• 제20권4호
• /
• pp.427-430
• /
• 1999

The Grignard coupling reaction of bis(chloromethyl)diorganosilanes [(ClCH2)2SiR1R2: R1 = R2 = Me, la; R1 = Me, R2 = Ph, lb; R1 = R2 = Ph, lc] with diorganodichlorosilanes [(Cl2SiR3R4: R3 = R4 = Me, 2a; R3 = Me, R4 = Ph, 2b; R3 = R4 = Ph, 2c] at THE reflux temperature gave the intermolecular C-Si coupling product of 1,1,3,3-tetraorgano-1,3-disilacyclobutanes 3a-f in poor to moderate yields ranging from 7% to 50% along with polydiorganosilapropanes. The cyclization reaction of la-c with methyl-substituted dichlorosilanes 2a, b gave 1,3-disilacyclobutanes 3a-c, e, d in moderate yields (42-50%), while the same reaction with dichlorodiphenylsilane (2c) to 1,3-disilacyclobutanes 3d, f resulted in low yield (7-18%) probably due to the steric hindrance of two-phenyl groups on the silicon of 2c.

• Fibers and Polymers
• /
• 제4권2호
• /
• pp.59-65
• /
• 2003

PLA/LPCL/HPCL blends composed of poly(lactic acid) (PLA), low molecular weight poly($\varepsilon$-caprolactone) (LPCL), and high molecular weight poly($\varepsilon$-caprolactone) (HPCL) were prepared by melt blending for bioabsorbable fila-ment sutures. The effects of blend composition and blending time on the ester interchange reaction by alcoholysis in the PLA/LPCL/HPCL blends were studied. Their thermal properties and the miscibility due to the ester interchange reaction were investigated by $^1{H-NMR}$, DSC, X-ray, and UTM analyses. The hydroxyl group contents of LPCL in the blends decreafed by the ester interchange reaction due to alcoholysis. Thus, the copolymer was formed by the ester interchange reaction at $200^{\circ}C$ for 30-60 minutes. The thermal properties of PLA/LPCL/HPCL blends such as melting temperature and heat of fusion decreased with increasing ester interchange reaction levels. However, the miscibility among the three poly-mers was improved greatly by ester interchange reaction. Tensile strength and modulus of PLA/LPCL/HPCL blend fibers increased with increasing HPCL content, while the elongation at break of the blend fibers increased with increasing LPCL content.

• 청정기술
• /
• 제29권1호
• /
• pp.39-45
• /
• 2023

To investigate the effects of Mg addition at different aging times and temperatures, Cu/MgO/Al₂O₃ catalysts were synthesized for the low-temperature water gas shift (LT-WGS) reaction. The co-precipitation method was employed to prepare the catalysts with a fixed Cu amount of 30 mol% and varied amounts of Mg/Al. Synthesized catalysts were characterized using XRD, BET, and H₂-TPR analysis. Among the prepared catalysts, the highest CO conversion was achieved by the Cu/MgO/Al₂O₃ catalyst (30/40/30 mol%) with a 60 ℃ aging temperature and a 24 h aging time under a CO₂-rich feed gas. Due to it having the lowest reduction temperature and a good dispersion of CuO, the catalyst exhibited around 65% CO conversion with a gas hourly space velocity (GHSV) of 14,089 h-1 at 300 ℃. However, it has been noted that aging temperatures greater or less than 60 ℃ and aging times longer than 24 h had an adverse impact, resulting in a lower surface area and a higher reduction temperature bulk-CuO phase, leading to lower catalytic activity. The main findings of this study confirmed that one of the main factors determining catalytic activity is the ease of reducibility in the absence of bulk-like CuO species. Finally, the long-term test revealed that the catalytic activity and stability remained constant under a high concentration of CO₂ in the feed gas for 19 h with an average CO conversion of 61.83%.

• 한국진공학회지
• /
• 제3권2호
• /
• pp.147-157
• /
• 1994

Valence or core electron excitations induced by Synchrotron radiation (SR) irradiation and ensuing chemical reactions can be applied for semiconductor processes i, e, deposition etching and modifications of thin film materials. Unique selectivity can be achieved by this photochemical reactions in deposition and etching. Some materials can be ecvaporated by SR irradiation which can be utilized for low temperature surface cleaning of thin films. Also SR irradiation significantly lowers the reaction temperature and photon activated surface reactions can be utilized for direct writing or projection lithography of electronic materials. This technique is especially effective in making nanoscale feature size with abrupt and well defined interfaces for next generation electronic devices.

• 한국군사과학기술학회지
• /
• 제6권3호
• /
• pp.74-85
• /
• 2003

NENA(nitratoethyl nitramine) compounds, especially BuNENA(N-butyl-N-(2-nitratoethyl)-nitramine), are of high interest to both rocket propulsion and military high explosives because of low sensitivity to many forms of stimuli, although they are less energetic than conventional nitrate ester plasticizers. One of advantages in using NENAs is that they provide higher impulse at any given flame temperature than conventional propellants do. BuNENA has better thermochemical characteristics(low melting point and low glass transition temperature), therefore has less tendency to crystallize out of matrices. BuNENA was successfully synthesized in a high yield by reaction of n-butyl aminoethanol and 98% nitric acid followed by dehydrogenation of salt mixture by $Ac_2$/$ZnCl_2$.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.141-144
• /
• 2011

We report the synthesis of $SrTiO_3$, $BaTiO_3$ and $Ba_xSr_{1-x}TiO_3$ (BST) nanoparticles (NPs) in various compositions (x = 0.25, 0.5 and 0.75) by an inorganic sol-gel method under a basic condition. Highly crystalline nanoparticles were formed at the reaction temperature of 25 - $100^{\circ}C$ from a stabilized titanium alkoxide in tetramethylammonium hydroxide (TMAH) and barium or strontium acetate in aqueous solution. Morphology and particle structure of the synthesized BST NPs were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The BST nanoparticles in various compositions were monodispersed without mutual aggregation, and their average sizes were in the range of 70 - 80 nm. Furthermore, they showed highly crystallized perovskite phase over the whole composition range from $SrTiO_3$ to $BaTiO_3$. We also proposed a mechanism for the low-temperature formation of BST NPs.

• 대한기계학회논문집
• /
• 제19권11호
• /
• pp.2981-2994
• /
• 1995

In order to elucidate the effects of positive pressure gradient on flame properties, structure and stabilization, an experimental study is made on turbulent diffusion flame stabilized by a circular cylinder in a divergent duct flow. A commercial grade gaseous propane is injected from two slits on the rod as fuel. In this paper, stabilization, characteristics and flame structure are examined by varying the divergent angle of duct. Temperature, ion current and Schlieren photographs were measured. It is found that critical divergent angle is expected to be about 8 ~ 12 degree through blow-off velocity pattern to divergent angle and the positive pressure gradient influences the flame temperature, intensity of ion current and eddy structure behind the rod. With the increase of divergent angle, typical temperature of recirculation zone is low but intensity of ion current is high in shear layer behind rod. Energy distributions of fluctuating temperature and ion current signals turn up low frequency corresponding to large scale eddies but high frequency corresponding to small scale eddies as well as low with the increase of divergent angle. Therefore the flame structure becomes a typical distributed-reacting flame.