• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.123-126
• /
• 2003

In the present paper, the analysis is on the safe navigation between ships moving each other in restricted waterways under the external force, such as wind or current The numerical simulation of manoeuvring motion was carried out to propose an appropriate safe speed and distance between ships, which is required to avoid marine disasters from the viewpoint of marine safety. From the inspection q this investigation, it indicates the following result In case of proximal navigation between ships under the wind and current, the low-speed vessel is potentially hazardous because the rudder force if low-speed vessel needed for steady-state course-keeping is not sufficient, compared to the high-speed vessel The manoeuvring characteristic based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in restricted waterways.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.89-93
• /
• 2002

Resistance performance of 6.67 G/T class fishing vessel is experimentally investigated in low and middle speed ranges to find out the effect of a new chine. The tests are performed for four different cases in the circulating water channel(CWC). Wave patterns are observed together to make clear the relation between the resistance performance and the wave characteristics. The results show that the new chine can be one of the effective device to reduce the resistance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.4
• /
• pp.169-176
• /
• 2021

Maritime monitoring requirements have been beyond human operators capabilities due to the broadness of the coverage area and the variety of monitoring activities, e.g. illegal migration, or security threats by foreign warships. Abnormal vessel movement can be defined as an unreasonable movement deviation from the usual trajectory, speed, or other traffic parameters. Detection of the abnormal vessel movement requires the operators not only to pay short-term attention but also to have long-term trajectory trace ability. Recent advances in deep learning have shown the potential of deep learning techniques to discover hidden and more complex relations that often lie in low dimensional latent spaces. In this paper, we propose a deep autoencoder-based clustering model for automatic detection of vessel movement anomaly to assist monitoring operators to take actions on the vessel for more investigation. We first generate gridded trajectory images by mapping the raw vessel trajectories into two dimensional matrix. Based on the gridded image input, we test the proposed model along with the other deep autoencoder-based models for the abnormal trajectory data generated through rotation and speed variation from normal trajectories. We show that the proposed model improves detection accuracy for the generated abnormal trajectories compared to the other models.

• Journal of the Korean Institute of Navigation
• /
• v.1 no.1
• /
• pp.45-62
• /
• 1977

The advanced researches of the ship's motion in the seaway can predict the heaving, pitching and slamming of ship's motion. The researches as of today are that of displacement type such as a small typical fishing boat and U, UV and V bow ship forms under low speed. In recent day, the study of behaviours of high speed planning boat in the regular waves has been carried out by Bessho [5]. The calculation about behaviours of a high speed vessel in the longitudinal regular waves is calculated by Ordinary Strip Method in this paper. The data of the results were discussed and compared with Bessho's results. The conclusions deduced from this study are as follow, (1) The acceleration of motion calculated by the O.S.M. is similar with Bessho's data for the Fn 0.5 (2) The amplitudes of the behaviours of motions take peak at 1.0<λ/L<1.4.

• Journal of the Korean Institute of Navigation
• /
• v.3 no.2
• /
• pp.1-19
• /
• 1979

The advanced researches of the ship's motion in the seaway can predict the heaving, pitching and slamming of ship's motion. The researches as of today are that of displacement type such as a small typical fishing boat and U, UV and V bow ship forms under low speed. In recent day, the study of behaviours of high speed planning boat in the regular waves has been carried out by Bessho [5]. The calculation about behaviours of a high speed vessel in the longitudinal regular waves is calculated by Ordinary Strip Method in this paper. The data of the results were discussed and compared with Bessho's results. The conclusions deduced from this study are as follow, (1) The acceleration of motion calculated by the O.S.M. is similar with Bessho's data for the Fn 0.5 (2) The amplitudes of the behaviours of motions take peak at 1.0<λ/L<1.4.

• Journal of Power System Engineering
• /
• v.22 no.6
• /
• pp.20-27
• /
• 2018

Vessel maneuvering problem in the harbor area is generating considerable interests in terms of marine cybernetics. In this sense, the vessel is operated and moves at ultimately low or zero speed in shallow water area. So the vessel is usually aided by the cooperation with thrusters, main propulsion system, tugboats and pilots, etc. In this paper, we suggest a new vessel berthing technique using dampers and winches as a solution for excessively complicate and dangerous berthing work. In the proposed berthing method, in order to manipulate the actuators (winches and dampers), a simple and heuristic control strategy is applied for a basic experiment. Finally, experiments are conducted to verify the effectiveness of the proposed automatic vessel berthing strategy based on the heuristic control method.

• Journal of Navigation and Port Research
• /
• v.42 no.5
• /
• pp.317-322
• /
• 2018

Marine weather information provided for vessels is mainly offered by radio devices such as NAVTEX, Weather Fax., and others. However, the information is too general for large areas, and lacks more detail. So, many seafarers are disinclined to use the information to initiate proper readiness of vessels' safety, avoiding marine accidents such as grounding, hull and cargo damage, but cannot develop an optimal and economical navigation plan, considering the inadequate level of low precision weather information. The purpose of this paper is to develop a strong wind warning system, based on the digital anemometer installed on the bridge. This study analyzed the data on 10-minutes average wind speed, when the vessel's grounding accidents happened in Korean ports. Results reveal that the vessel's strong wind warning algorithm, can estimate the growing of wind speed two-three hours in advance.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.94-99
• /
• 2021

It was found that mixing patterns suddenly changed at an impeller rotation speed in a dished bottom vessel with dual Rushton turbines. Two isolated mixing regions like doughnuts rings generated at a low rotational speed and three isolated mixing regions generated at a higher speed. This phenomenon was observed at the mixing condition in transition area, where the power number with baffle was the same as that without baffle. We found a phenomenon in which the flow state in a dish-bottom agitation tank equipped with a two-stage Rushton turbine blade changes at a certain rotational speed. In the laminar flow region, the isolated stable donut rings were formed even when the rotational speed was changed, and no specific variation in the mixing pattern was observed. In the transition region, the two isolated thick unmixed donut rings do not change even if the rotation speed is changed in the flat bottom vessel, whereas in the dished bottom vessel, when the rotation speed is 450 rpm, the two isolated thick unmixed donut rings are changed to three isolated thin donut rings and then improved mixing. In the dished bottom vessel, in the range of Re=138~178, the isolated ring-shaped unmixed region appeared in three places and the size was also large. But in the flat bottom vessel, the isolated thick ring-shaped unmixed region appeared in two places in Re=116~176 and the size was also small. It appeared in two places, and the size was also small. The condition in which this phenomenon is observed is a transition region, and it was found that when the baffle plate is attached, the power number starts to increase compared to when the baffle plate is not present. In addition, when the mixing Reynolds number exceeded 300 and a slight turbulence was mixed in the flow state, the disconnection of these flow pattern was resolved and the mixture was completely mixed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.141-143
• /
• 2019

Vessel Traffic Service (VTS) increases the efficiency of maritime traffic in terms of reducing marine accidents and the efficient use of port facilities. This means that ports and waterways have their own capacities and can be safely adapted to their capacity through proper traffic management of the VTS. Proper traffic management can reduce the number of vessels and unnecessary waiting in ports, which can lead to economic benefits of ups and port terminals. On the other hand, Korean ports and waterways have restrictions on the maximum speed for safety, but there is no restriction on the minimum speed. However, ships that operate at low speeds in ports and waterways may be able to occupy long periods of operational routes, which may impede efficient port operation. Therefore, the purpose of this study is to propose the minimum speed of ship for efficient port and waterway use. To this end, we reviewed the current laws and systems and proposed the appropriate minimum speed in the waterway using the theory of queue.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.6
• /
• pp.631-637
• /
• 2002

Two stroke low speed diesel engines are used as a power supplier not only for marine vessel but also diesel power plant with a benefit of its higher mobility and durability than the other thermal engines. However, there are some disadvantages such as the bigger vibrating excitation forces generated by high combustion pressure in cylinders which various kinds of vibrations are caused. In this paper, it is theoretically studied to control engine body vibration using dynamic vibration absorber. As an actual case, dynamic absorbers are designed for controlling X-mode vibration of 9K80MC-S engine on the diesel power plant and its performance is identified by the vibration test both in shop and site