• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.162-162
• /
• 2016

We present multifunctional indium tin oxide (ITO) thin films formed at room temperature by a normal sputtering system equipped with a plasma limiter which effectively blocks the bombardment of energetic negative oxygen ions (NOIs). The ITO thin film possesses not only low resistivity but also high gas diffusion barrier properties even though it is deposited on a plastic substrate at room temperature without post annealing. Argon neutrals incident to substrates in the sputtering have an optimal energy window from 20 to 30 eV under the condition of blocking energetic NOIs to form ITO nano-crystalline structure. The effect of blocking energetic NOIs and argon neutrals with optimal energy make the resistivity decrease to $3.61{\times}10-4{\Omega}cm$ and the water vapor transmission rate (WVTR) of 100 nm thick ITO film drop to $3.9{\times}10-3g/(m2day)$ under environmental conditions of 90% relative humidity and 50oC, which corresponds to a value of ~ 10-5 g/(m2day) at room temperature and air conditions. The multifunctional ITO thin films with low resistivity and low gas permeability will be highly valuable for plastic electronics applications.

• KIEE International Transactions on Power Engineering
• /
• 제5A권4호
• /
• pp.350-356
• /
• 2005

Earth equipments are essential to protect humans and other types of equipment from abnormal conditions. Earth resistance and potential must be restricted within a low value. An estimation algorithm of earth parameters and equivalent resistivity is introduced to calculate reliable earth resistance in this research. The proposed algorithm is based on the relationship between apparent resistances and earth parameters. The proposed algorithm, which approximates the non-linear characteristics of earth by using the Artificial Neural Network (ANN), estimates the earth parameters and equivalent resistivity. The effectiveness of the proposed method is verified with case studies.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.70-74
• /
• 2004

We investigated transmittance, surface characteristics, and resistivity according to bending of ITO(indium tin oxide) film with four other multi -harrier film). Transmission data of ITO film with four ITO films showed there was about large 90％ transmission above 550nm wavelength at three multi-barrier structures. But, both-side hard coated structure showed relatively low 75％ transmission above 550nm wavelength. And, surface images measured from SEM (scanning electron microscope) showed both-side hard coated structure have a tendency of more roughness. Also, resistivity change of four other multi-barrier film showed there was the lowest change at one-side hardcoated structure. Subsequently, with result of resistivity change according to position, we knew the resistivity change of the center increased rapidly than that of the edge.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2261-2264
• /
• 2010

In this work, mechanical and electrical properties of graphenes (GP)/carbon nanotubes (CNTs) co-reinforced high density polyethylene (HDPE) matrix composites were studied. The microstructure, morphologies, and electric properties of the composites were evaluated by XRD, TEM, and 4-probe methods, respectively. It was found that the electric resistivity of 0.5 wt %-GP/HDPE was immeasurable, and 2.0 wt %-CNTs/HDPE showed high resistivity ($6.02{\times}10^4{\Omega}{\cdot}cm$). Meanwhile, GP (0.5 wt %)/CNTs (2.0 wt %)/HDPE showed excellent low resistivity ($3.1{\times}10^2{\Omega}{\cdot}cm$). This result indicates that the co-reinforcement systems can dramatically decrease electric resistivity of the carbon/polymer nanocomposites.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.337-344
• /
• 1990

As a function of sintering temperature and time, the electrical properties of ruthenium based thick film resistors were investigated with microstructure. The variatio of resistivity and TCR(temperature coefficient of resistance)trends of sintered speciman at various sintering temperature were different low resistivity paste(Du Pont 1721) from high one(Du Pont 1741). These phenomena are deeply relative to microstructure of sintered film. With increasing the sintering temperature for 1721 system, the electrical sheet resistivity decreased, but again gradually increased above 80$0^{\circ}C$. And TCR trends in 1721 system are all positive. On the other hand the electrical sheet resistivity of 1741 resistor system decreased with sintering temperature. And TCR trends variable according to sintering temperature. TCR of speciman sintered at $700^{\circ}C$ was negative value, and TCR of 80$0^{\circ}C$ sintered speciman coexisted negative and positive value. But in case of speciman sintered at 90$0^{\circ}C$, TCR was positive value. As results of this fact, it was well known that the charge carrier contributied to electrical conduction in 1741 resistor system varied with sintering temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.267-269
• /
• 1997

The electrical properties due to the Benzotriazole(following as BTA) additive in fluids for insulating and cooling the ultra-high voltage transformer is studied in this paper. Specimen having the several contents of BTA, such as 5[ppm]. 10[ppm] and 30[ppm] is used in order to investigate the characteristics on volume resistivity in case of fluid flow in experimental device made in lab. Volume resistivity is decreased with an increase of fluid flow velocity and increased with BTA content in low temperature region, but volume resistivity of specimen contained BTA 10[ppm] is the largest thing over $30[^{\circ}C]{\sim}50[^{\circ}C]$ than the others in experiment.

• 한국관개배수논문집
• /
• 제13권2호
• /
• pp.254-261
• /
• 2006

We applied electrical resistivity survey using modified pole-pole array and small-loop electromagnetic survey to delineate the zone of seawater inflow through a tide embankment. The tide embankment is generally affected by tidal variation and has low resistivity characteristic due to the high saturation of seawater. For this reason, the electrical resistivity survey using modified pole-pole array, which is relatively more effective to the conductive media, was carried out to detect the inflow zone of seawater and small-loop electromagnetic survey using multi-frequency with 300 to 20,010 Hz was conducted. As a result of both electrical resistivity survey using modified pole-pole array and small -loop electromagnetic survey, these survey methods are found to be quite effective for investigation of seawater inflow zone in the sea dike.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.258-261
• /
• 2000

Geophysical surveys (electrical resistivity, self-potential, and magnetic methods) and streamwater sample analysis have been carried out at a site of tailings of waste deposits in an abandoned mine, Jangpoong, which is situated in Kowesan-Gun, Chungbuk-Do. The research was aimed at investigating the suitability of the various geophysical methods for detection of AMD (acid mine drainage) paths, and ultimately mapping of preferred AMD flow channels by incorporating the water sample analysis. Electrical resistivity section from the dipole-dipole line represents the low-resistivity zone trending northwest toward the stream nearby. The positions of the resistivity anomalies for AMD channels are well correlated to the ones from the various geophysical surveys. In addition they correspond to the sites of the higher peaks for the pH, EC, heavy metal content for the water sample data.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.623-630
• /
• 1988

As a function of the composition and content of frit, the electrical property of Ag and Ag/Pd thick film conductors were investigated with microstructure. With increasing sintering temperature in Ag-frit thick film conductors, electrical sheet resistivity decreased, but again increased above 80$0^{\circ}C$. And when frit contents is 5wt%, compact and homogenious microstructure can be obtained, then electrical sheet resistivity has minimum value. In Ag/Pd-frit film conductor, the electrical sheet resistivity decreased with increasing sintering temperature. The system which having frit with low softing point has lower sheet resistivity then to add high softening point frit.

• 지구물리
• /
• 제9권4호
• /
• pp.455-462
• /
• 2006

본 연구에서는 그라우팅 효과를 간편히 그리고 합리적으로 평가하기 위한 방법의 하나로서 전기비저항 탐사에 대한 적용성을 검토하였다. 전기비저항 탐사를 통한 보강 효과를 보다 정확하게 이해하기 위해, 누수에 의한 코아의 세립분 유출이 코아부의 전기비저항에 어떤 변화를 발생시키는가에 대한 메커니즘을 분석하여 탐사시의 조건에 따라서 연약부분의 비저항이 낮아질 수도 높아질 수도 있다는 사실을 확인하였다. 이는 통상적으로 인식되어지고 있는 코아의 연역부분에서는 비저항이 낮아진다는 사실에 반하는 것으로서 이러한 메커니즘 하에서 실제 그라우팅에 의해 보수・보강이 수행된 댐체에 대한 보강 전・후의 전기비저항을 비교・분석하였으며, 그 결과 보강 후의 비저항이 균일한 분포를 나타내고 있다든지 비정상적인 이상 비저항대가 없어졌다든지 하는 그라우팅의 효과를 성공적으로 평가할 수 있었다. 즉, 그라우팅에 의한 효과를 평가하는데 있어서 전기비저항 탐사는 매우 효율적인 방법 중의 하나라는 것을 알 수 있다