• 한국분무공학회지
• /
• 제15권3호
• /
• pp.109-114
• /
• 2010

The implementation of gelled propellants systems offers high performance, energy management of liquid propulsion, storability, and high density impulse of solid propulsion. The present study focused on the macroscopic spray characteristics of liquid sheets formed by triplet impinging jets of non-Newtonian liquids which are mixed by Carbopol 941 0.5%wt. The results are compared to experiments conducted on spray images which formed by triplet impinging jets concerning with airassist effect at center orifice. When gel propellants are injected by doublet impinging jets at low pressure and high pressure, closed rim pattern shape appeared by polymeric effect from molecular force and showed inactive atomization characteristics, because of extensional viscosity related by restriction of atomization process and breakup time delay of turbulence transition. As increasing mass flow rate of the air(increasing GAR), spray breakup level is also increased.

• 한국해양학회지
• /
• 제19권2호
• /
• pp.210-216
• /
• 1984

5년간의 시간별 풍속 자료를 이용하여 연안 표층풍의 일변화가 분석되었다. 특히 내륙으로 부는 바람 (onshore flow)이 지배적인 계절에는 야간 최대풍의 최대 출현 빈도가 자정에 나타났다. 연평균 남풍 계열을 갖는 야간 최대풍은 북풍 계열 보다 약 3배이상의 출현을 보여준다. 중림의 대기 안정도가 연안에 지배적이므로 바람이 해양에서 내륙으로 불 경우는 (offshore flow) 상승된 전선역전층과 지표역전층에 의해 형성된 전단력(shear flow)이 연안경계층으로 전이되어 야간 연안 최대표층풍이 형성된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.471-474
• /
• 1996

The effects of injection angles between $0^{\circ}$ and $9^{\circ}$, mainstream turbulent intensities between 0.36 percent and 9.3 percent and embedded longitudinal vortices on jets issuing from a single film cooling hole and from a row of inclined holes are investigated. The heat transfer coefficients around film cooling holes are affected greatly by the compound injection angles. The injected jets affected weakly by the freestream turbulence at low level. However, the heat transfer coefficients near the film cooling holes have higher values at a high turbulence intensity. The vortices generated from a delta winglet change the injected jet direction and the kidney-type vortex pattern.

• 대기
• /
• 제25권1호
• /
• pp.31-49
• /
• 2015

From the hourly data of 75 Korean weather stations over a 12-year period (2001~2012), this study has chosen three cases (January 12, 2006; January 11, 2008; and February 22, 2009) of multiple freezing rains and investigated the atmospheric circulations that seemed to cause the events. As a result, the receding high pressure type (2006), prevailing high pressure type (2008), and warm front type (2009) are confirmed as synoptic patterns. In all three cases, freezing rain was found in regions with a strong ascending current near the end point of a low-level jet that carried the warm humid air from low latitudes. The strong ascending current resulted from lower-level convergence and upper-level divergence. In 2006 and 2009, the melting process was confirmed. In 2008, the supercooled warm rain process (SWRP) was confirmed. In contrast to existing SWRP theory, it was found that the cool air produced at the middle atmosphere and near the earth's surface led to the formation of freezing rain. The sources of this cool air were supposed to be the evaporative latent heat and the cold advection coming from the northeast. On the other hand, a special case was detected, in which the freezing rain occurred when both the soil surface temperature and surface air temperature were above $0^{\circ}C$. The thickness distributions related to freezing rain in Korea were found to be similar to those in North America. A P-type nomogram was considered for freezing rain forecasting; however, it was not relevant enough to Korea, and few modifications were needed.

• 대기
• /
• 제21권4호
• /
• pp.391-404
• /
• 2011

This study investigates the impact of cumulus parameterization scheme (CPS) with different horizontal grid sizes on the simulation of the local heavy rainfall case over the Korean Peninsula. The Weather Research and Forecasting (WRF)-based real-time forecast system of the Joint Center for High-impact Weather and Climate Research (JHWC) is used. Three CPSs are used for sensitivity experiments: the BMJ (Betts-Miller-Janjic), GD (Grell-Devenyi ensemble), and KF (Kain-Fritsch) CPSs. The heavy rainfall case selected in this study is characterized by low-level jet and low-level transport of warm and moist air. In 27-km simulations (DM1), simulated precipitation is overestimated in the experiment with BMJ scheme, and it is underestimated with GD scheme. The experiment with KF scheme shows well-developed precipitation cells in the southern and the central region of the Korean Peninsula, which are similar to the observations. All schemes show wet bias and cold bias in the lower troposphere. The simulated rainfall in 27-km horizontal resolution has influence on rainfall forecast in 9-km horizontal resolution, so the statements on 27-km horizontal resolution can be applied to 9-km horizontal resolution. In the sensitivity experiments of CPS for DM3 (3-km resolution), the experiment with BMJ scheme shows better heavy rainfall forecast than the other experiments. The experiments with CPS in 3-km horizontal resolution improve rainfall forecasts compared to the experiments without CPS, especially in rainfall distribution. The experiments with CPS show lower LCL(Lifted Condensation Level) than those without CPS at the maximum rainfall point, and weaker vertical velocity is simulated in the experiments with CPS compared to the experiments without CPS. It means that CPS suppresses convective instability and influences mainly convective rainfall. Consequently, heavy rainfall simulation with BMJ CPS is better than the other CPSs, and even in 3-km horizontal resolution, CPS should be applied to control convective instability. This conclusion can be generalized by conducting more experiments for a variety of cases over the Korean Peninsula.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.46-55
• /
• 2005

For the sea-level performance test of rocket motor designed to operate in the upper atmosphere, ejectors with no induced secondary flow are generally used, which serves dual purposes of evacuating the test cell and performing as a supersonic exhaust diffuser (SED). The main concern of this research is to simulate starting transients in order to visualize evolution of internal shock structures in SED with different initial cell (vacuum chamber) pressures. RANS code with low Reynolds $k-\varepsilon$ turbulence model was employed for these computations. Numerical results were compared with the pressure measurements previously performed [Proceedings of 2004 Annual Conference, KIMST], and showed good agreements with pressure-time history of measured data. In the case of low vacuum chamber pressure, abrupt impingement of the under-expanded supersonic jet from the nozzle onto the diffuser wall was observed, whereas initial impingement point was located downstream and moved slowly upstream in the case of non-vacuum chamber pressure. In spite of initially dissimilar evolution of shock structures, iso-mach contour revealed that the steady shock structures had little difference except the location of flow separation and normal shock.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.327-336
• /
• 2017

Fishing dredge in Jeollabuk-do began to become widespread in the 1960s and has continued to catch diverse kinds of shellfish in the productive fishing grounds around Dongjin River, Mangyeong River and Geum River estuaries. Since the 1970s, the construction of various large-scale industrial complex and the implementation of Saemangeum reclamation project have resulted in a decrease in main fishing areas and a sharp decline in shellfish production. As a result, dredge fishery has faced many difficulties. Dredge fishery in Jeollabuk-do is carried out with a total of 30 fishing permits as of 2016. Surf clams, hen clams, bladder moon snails, and common orient clams were mainly caught before the construction of Saemangeum dike while comb pen shells, purple whelks and ark shells are mainly caught afterwards. Inside the Saemangeum dike, most fish species have disappeared due to low water level and low salinity, and littleneck clams are caught using a jet pump type of fishing dredge. Outside the dike, the diversity of shellfish species has been reduced; comb pen shells are mainly caught. In this process, a lot of friction occurs due to the use of a reformatted dredge. Therefore, a lot of research needs to be conducted in the near future.

• 천문학회보
• /
• 제44권2호
• /
• pp.36.4-36.4
• /
• 2019

Ricci et al. (2017, Nature, 549, 488) discovered a lack of high accretion rate, obscured Active Galactic Nuclei (AGN) in the hard X-ray selected Swift/BAT local AGN survey. This was interpreted as radiative pressure driven AGN feedback clearing its immediate vicinity composed of dusty gas (having an effectively low Eddington limit in the order of 0.01-0.1), and governing the level of nuclear obscuration. As we find Eddington-limited accretion and high extinction values among obscured, luminous AGN (quasars) however, it may be that the local X-ray AGN and the distant quasars undergo different feedback mechanisms in clearing their surroundings. In this study, we simply compare the obscuring column density and Eddington ratio values for quasars selected by various methods, including X-ray obscured, optically blue, infrared red/luminous, and submillimeter bright AGN. We find obscured quasars lying on the column density-Eddington ratio diagram previously unoccupied by Ricci et al., suggesting that radiative pressure is insufficient to clear its dusty structure at high luminosity, or that the dust in obscured quasars are more extended than the low luminosity counterparts to become fully transparent. We discuss alternative feedback scenarios that may be more relevant for obscured quasars.

• 한국지구과학회지
• /
• 제42권3호
• /
• pp.264-277
• /
• 2021

본 연구의 목적은 최근 발생한 태풍들의 이동속도와 관련하여 대기 중 총가강수량의 변화를 분석하는 것이다. 이 연구를 위해 미국기상위성연구소 및 기상청 천리안위성 2A호(GEO-KOMPSAT-2A)의 총가강수량 및 주야간 RGB 합성영상 자료뿐만 아니라 기상청의 기온, 강수량 및 풍속 등의 지상 관측 자료가 사용되었다. 기상청에서 제공하는 태풍 위치 및 이동속도를 활용하여, 2020년 태풍 바비, 마이삭, 하이선과 2019년 태풍 타파, 그리고 2018년 태풍 콩레이의 이동속도를 위도별 태풍 평균속도 통계자료와 비교하였다. 그 결과, 타파와 콩레이는 태풍의 위도별 평균속도와 유사하게 나타났으나 바비와 마이삭은 위도 약 25°N-30°N 구간에서 이동속도가 크게 감소하여 나타났다. 이는 대기 중의 수증기 띠가 전선의 형태로 바비와 마이삭 두 태풍의 전방에 위치하여 이들 태풍의 이동에 방해를 주었기 때문이었다. 즉 이동하는 태풍의 전방에 하층제트로 인해 발생한 수증기 띠가 전선을 형성할 경우, 이 전선과 태풍 사이에 위치하는 고기압 역은 더욱 발달하면서 열대야와 함께 블로킹 효과로 작용하여 태풍의 이동속도가 느리게 나타났다. 결과적으로 대기 중의 수증기가 많았던 바비와 마이삭의 경우, 1차로 하층제트를 따라 수증기 띠가 전선을 형성함으로 인한 집중호우가, 2차로 전선과 태풍 사이에 고기압 역의 하강기류로 인한 열대야 현상이, 그리고 3차로 태풍 자체의 육지 상륙에 의한 강풍과 폭우가 연달아 발생하였다.

• 한국항공우주학회지
• /
• 제36권6호
• /
• pp.581-586
• /
• 2008

기존의 수 mN급의 MEMS 고체 추진제 추력기는 실제 마이크로/나노 위성체의 킥모터,지능탄(Smart bomb)의 측추력기로 응용하기에는 추력 레벨이 너무 낮다는 한계가 있었다. 이 연구에서는 고체 추진제의 연소 면적을 증대시킴으로써 추력 레벨이 향상된 MEMS 고체 추진제 추력기의 제작 가능성을 확인하고 연소 실험을 통해서 구조체의 안정성을 확인하였으며 직접 추력을 측정하여 수백 mN급의 단위 추력기를 개발하였다. 연소 챔버와 노즐, 덮개 층은 감광성 유리 기판을 이용하여 제작하였으며 마이크로 점화기는 파이렉스 기판 위에 300 ㎚ 높이의 니켈과 크롬을 페터닝(patterning)하여 제작하였다. 마이크로 점화기의 성능 해석과 실험을 통한 검증을 수행하여 고체 추진제의 점화를 위한 공급 전력을 계산하였으며 힘 센서를 통하여 추력기의 추력을 측정하였다. 측정된 추력은 K=15와 20인 경우에 300, 600 mN 이었다.