• The Journal of Engineering Geology
• /
• v.3 no.1
• /
• pp.21-37
• /
• 1993

In order to investigate the correlation of sedimentary rock properties. specific gravity, porosity, water content, sonic wave velodty, and point4oad strength index of core samples of limestones, sandstones and shales were measured. The relationships between density and velocity show $V_p=16300d-38719.3,{\;}V_s1896.4d-29225.1$ of regression equation for sandstones and $Vp=4085d-10264.8,{\;}V_s=3519d-7841.3$ for shales and <$Vp=4085d^2-20747d+303,{\;}V_s=3899d^2-21442d+318$ for limestones. Seismic wave velocity of shales which have high density is lower than that of sandstones, and this seems to be an effect of bedding in shale. P-wave velocity and S-wave velocity of limestones, sandstones and shales show the linear relationships as a whole. The regression equations are respectively calculated V_s=0.26V_p+1041.6m/sec,{\;}V_s=0.43V_p+424.2m/sec,{\;}and{\;}Vs=0.51V_p+261.9m/sec$ and the correlation coefficients of the velocity show r= 0.86 in sandstones, r= 0.75 in limestones and r=0.86 in shales. According to the point4oad strength test for limestones, point4ord strength anisotropy was not so dear even though the specimens show generally the banded structure. Variations of dip angle of bedding whihin the range $30^{\circ}-60^{\circ}$ does not have much influence upon the diametral strength index and axial strength index. From the result of point load test, P-wave velocity increases with point4ord strength index but the regression equations are $V_p=98.5lI{s_d}+4082.1m/sec,{\;}V_p=106.41{s_a}+3954m/sec$ and their correlation coefficient is low.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.70-77
• /
• 1999

Objective of this research is to obtain fundamental data of carbonized wood wastes for soil condition, de-ordorization, absorption of water, carrier for microbial activity, and purifying agent for water quality of river. The carbonization technique and the properties of carbonized wood wastes(thinned trees) are analyzed. Proximate analysis shows the thinned wood contains 0.22-0.73% ash, 77-80% volatile matter, and 10-14% fixed carbon. The charcoal yield decreases and the shrinkage rate increases as the carbonization temperature and time increase. The charcoal yields of Larix leptolepis, Pinus rigida and Pinus densiflora are high, whereas those of Pinus koraiensis and Quercus variabilis are low. The shrinkage rate by carbonization has same trend as water removal of wood. The specific gravity after the carbonization decreases about 50% comparing to green wood. The charcoal has 0.89-4.08% ash, 6.31-13.79% volatile matter, and 73.9-83.5% fixed carbon. As the carbonization temperature and time increase, pH of charcoal increases. When the carbonization temperature is $400^{\circ}C$, pH is about 7.5. When the temperature is between 600 to $800^{\circ}C$, pH is about 10 with small difference. The water-retention capacity is not affected by the carbonization temperature and time. The water-retention capacity within 24hr is about 2.5 - 3times of sample weight, and the equivalent moisture content becomes 2-10% after 24 hr.

• Journal of Korea Water Resources Association
• /
• v.43 no.2
• /
• pp.153-165
• /
• 2010

Large-Scale Particle Image Velocimetry (LSPIV) is an extension of particle image velocimetry (PIV) for measurement of flows spanning large areas in laboratory or field conditions. LSPIV is composed of six elements - seeding, illumination, recording, image transformation, image processing, postprocessing - based on PIV. Possible error elements at each step of Mobile LSPIV (MLSPIV), which is a mobile version of LSPIV, in field applications are identified and summarized the effect of the errors which were quantified in the previous studies. The total number of elemental errors is 27, and five error sources were evaluated previously, seven elemental errors are not effective to the current MLSPIV system. Among 15 elemental errors, four errors - sampling time, image resolution, tracer, and wind - are investigated through an experiment at a laboratory to figure out how those errors affect to velocity calculation. The analysis to figure out the effect of the number of images used for image processing on the velocity calculation error shows that if over 50 images or more are used, the error due to it goes below 1 %. The effect of the image resolution on velocity calculation was investigated through various image resolution using digital camera. Low resolution image set made 3 % of velocity calculation error comparing with high resolution image set as a reference. For the effect of tracers and wind, the wind effect on tracer is decreasing remarkably with increasing the flume bulk velocity. To minimize the velocity evaluation error due to wind, tracers with high specific gravity is favorable.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.6
• /
• pp.1-12
• /
• 2005

Treatment level and pond reactions of a pond system were examined from May to October 2002. The system was constructed in July 2000 for purifying water of Sinyang stream that flows into Koheung Estuarine Lake located in the southern part of the Korean Peninsula. The system was composed of a primary and a secondary pond in series and established on the rice field near the lake. Water pumped from the stream was funneled into the primary pond, whose effluent was discharged into the secondary pond by gravity flow. Effluent from the secondary pond was funneled into wetlands. About 130 $m^3$/day of water was pumped into the primary pond and detention time of the primary and secondary pond was about 2 days. DO from the surface to the 1.0 m depth of the primary and secondary pond was in the rage of 5.2 to 11.0 mg/L and 4.3 to 0.7 mg/L, respectively. DO at the bottom layer of the primary pond was 0 mg/L and that of the secondary pond ranged 3.0~4.7 mg/L. The primary pond functioned as a facultative pond and the secondary as an aerobic one. The temperature difference between the surface and bottom layers of the ponds in August was about $2.5^{\circ}C$ and that in May and October was about $1.0^{\circ}C$. Thermocline was observed in the primary pond during the high ambient temperature of August. The sludge depth of the primary pond in May, August, and October was 2.4, 1.9, and 2.2 cm, respectively. That of the secondary pond was 1.2, 1.0, and 1.1 cm, respectively. SS, $BOD_5$, T-N, and T-P concentrations in influent averaged 16.64, 6.71, 6.21, and 0.23 mg/L and those in effluent from the primary pond averaged 11.48, 4.97, 4.81, and 0.17 mg/L, respectively. The removal rates of the primary pond for SS, $BOD_5$, T-N and T-P were 31%, 26%, 22%, and 24%, respectively. Average concentrations of SS, $BOD_5$, T-N, and T-P in effluent from the secondary pond were 9.81, 4.07, 4.03, and 0.14 mg/L, respectively and the abatement rates of the secondary pond for SS, $BOD_5$, T-N and T-P were 20%, 12%, 13%, and 15%, respectively. SS, $BOD_5$, T-N and T-P concentrations in effluent from the primary pond were significantly low(p=0.001) when compared with those from the secondary one.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.194-199
• /
• 2002

Eight Korean wheat cultivars were milled and evaluated for the properties of white layer cake-making, compared to a commercial soft wheat flour. Milling yields of the Korean wheat cultivars ranged from 62.5 to 71.8%. The protein and ash contents of flours milled from Korean wheat cultivars ranged from 7.70 to 10.58% and 0.51 to 0.71%, respectively. Woorimil, Alchanmil and Olgeurumil flours, having low protein content, showed very weak mixing characteristics. Even though Eunpamil and Geurumil flours showed longer mixing time and higher peak height, they had week dough stability. Slight differences in pH and specific gravity of cake batter were observed among the Korean wheat flours. Cake volume measured by rapeseed displacement was in the range of $837.5{\sim}952.5\;cc$. Alchanmil flour demonstrated the highest specific volume of 2.40, and the other domestic flours symmetrical and uniform than those with the commercial soft wheat flour. Volume of white layer cakes was negatively affected by flour protein content and somewhat associated with crumb softness. Crumb color of cakes prepared with domestic wheat flours was slightly darker and more yellowish. Hardness of fresh cakes prepared with domestic flours ranged from 307.33 to 416.60 $g_f$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.6
• /
• pp.775-783
• /
• 2008

This study was performed to research quality characteristics of yellow layer cakes added with diacylglycerol oil and their effectiveness in reducing trans fatty acids and inhibiting accumulation of fats in the body. The diacylglycerol oil used in this study contained 80% diacylglycerol. In treatments 0, 10, 20, 30 and 40% of the weight of margarine were substituted with diacylglycerol oil. pH and specific gravity of cake batter of treatments increased with more diacylglycerol oil compared to that of the control group. Viscosity of cake batters of treatments also became higher with increasing diacylglycerol oil than that of the control. pH of cakes rose up with increasing amounts of diacylglycerol oil. Volume of cakes became bigger by reducing loss due to water evaporation in a baking process, resulting in a moister texture because of increased moisturizing capacity in oil. In the case of color, the Hunter's colorimetric lightness (L) got higher as the added amount was increased, and redness (a), yellowness (b) and color different ($\Delta$E) got lower against control accordingly. In particular, 30% treatment showed higher levels in the areas of volumes and moisture contents while 20 and 30% treatments were superior in sensory characteristics. Therefore, a yellow layer cake made by substituting 30% of the weight of margarine with diacylglycerol oil was expected to be a low-calorie cake because the oil improves taste and quality of cakes, reduces trans-fatty acids and inhibits accumulation of fats.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.19-24
• /
• 2007

Reefs are the marine structure that can give resting, inhabiting, feeding and nursing spaces for a variety of fishes. Usually artificial reefs are made of cement and steels respectively in Japan as well as in Korea. However since resources deficiency has been getting serious, other materials are taken into consideration for the basic bodies of artificial reefs. About 300 thousand tons of waste agricultural plastic films are generated every yew in Korea, but no effective recycling techniques have been developed. In this sense, artificial reefs made of waste agricultural plastic films are the most representative symbol of the recycled products in the Resource Recycling Era. In particular, since these reefs could be made of the semi-cleaned waste agricultural plastic films that still contain high portion of soil, it is very environmentally friendly not only in manufacturing process but also in using under water. Furthermore they have some evident advantages as follows; 1) high fish swarming effect 2) good initial attachment of the marine growths 3) extremely low corrosion to brine 4) easy adjustment of the gravity 5) economical manufacture, transportation and jettison 6) excellent safety to ecosystem caused by lower elution of toxic substances 7) good recyclable property after application and so on.

• Clean Technology
• /
• v.24 no.1
• /
• pp.9-14
• /
• 2018

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-Zr membrane manufacturing process. The software of MLCA was Gabi. Through this, environmental impact assessment was performed for each process. Transition metal nitrides have been researched extensively because of their properties. Among these, TiN has the most attention. TiN is a ceramic materials which possess the good combination of physical and chemical properties, such as high melting point, high hardness, and relatively low specific gravity, high wear resistance and high corrosion resistance. With these properties, TiN plays an important role in functional materials for application in separation hydrogen from fossil fuel. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of characterization and normalization, environmental impacts were 94% in MAETP (Marine Aquatic Ecotoxicity), 2% FAETP (Freshwater Aquatic Ecotoxicity), 2% HTP (Human Toxicity Potential). TiN fabrication process appears to have a direct or indirect impact on the human body. It is believed that the greatest impact that HTP can have on human is the carcinogenic properties. This shows that electricity use has a great influence on ecosystem impact. TiN-Zr was analyzed in Eco-Indicator '99 (EI99) and CML 2001 methodology.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.147-163
• /
• 2013

The world faces several issues of energy crisis and environmental deterioration due to over-dependence on single source of which is fossil fuel. Though, fuel is needed as ingredients for industrial development and growth of any country, however the fossil fuel which is a major source of energy for this purpose has always been terrifying thus the need for alternative and renewable energy sources. The search for alternative energy sources resulted into the acceptance of a biofuel as a reliable alternative energy source. This work presents the study of optimization of process of transesterification of vegetable oil to biodiesel using NaOH as catalyst. A $2^4$ factorial design method was employed to investigate the influence of ratio of oil to methanol, temperature, NaOH concentration, and transesterification time on the yield of biodiesel from vegetable oil. Low and high levels of the key factors considered were 4:1 and 6:1 mole ratio, 30 and $60^{\circ}C$ temperatures, 0.5 and 1.0 wt% catalyst concentration, and 30 and 60 min reaction time. Results obtained revealed that oil to methanol molar ratio of 6:1, tranesetrification temperature of $60^{\circ}C$, catalyst concentration of 1.0wt % and reaction time of 30 min are the best operating conditions for the optimum yield of biofuel from vegetable oil, with optimum yield of 95.8%. Results obtained on the characterizzation of the produced biodiesel indicate that the specific gravity, cloud point, flash point, sulphur content, viscosity, diesel index, centane number, acid value, free glycerine, total glycerine and total recovery are 0.8899, 4, 13, 0.0087%, 4.83, 25, 54.6. 0.228mgKOH/g, 0.018, 0.23% and 96% respectively. Results also indicate that the qualities of the biodiesel tested for are in conformity with the set standard. A model equation was developed based on the results obtained using a statistical tool. Analysis of variance (ANOVA) of data shows that mole ratio of ground nut oil to methanol and transesterification time have the most pronounced effect on the biodiesel yield with contributions of 55.06% and 9.22% respectively. It can be inferred from the results various conducted that vegetable oil locally produced from groundnut oil can be utilized as a feedstock for biodiesel production.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.82-87
• /
• 2007

Five dogs with renal failure were referred to the Veterinary Medical Teaching Hospital at Kangwon National University. These dogs had the common history of consumption of Pedigree dry dog food produced in Thailand plant for over 1 month. The dogs showed anorexia, emaciation, vomiting, and polydipsia/polyuria. And in one severely affected dog, bloody diarrhea and hypothermia were seen. The remarkable clinicopathological signs were high value of BUN and creatinine. In some dogs, GGT, phosphorus and lipase were increased. However, no significant changes of complete blood count were found. In urinalysis, hematuria, low specific gravity urine, proteinuria, and calcium oxalate-like crystals were observed. Two severely affected dogs were died. The remained dogs were recovered gradually after change of dog food and supportive therapy. Pathological findings were seen typically in kidneys. Renal atrophy, congestion of the glomerular capillary, and diffuse degeneration, necrosis, dystrophic calcification and regeneration in the tubular epithelium were seen. Yellowish brown fluorolucent laminated materials or particles were quite often found in the lumina of the necrotizing renal tubules of cortex and medulla. Proliferation of fibrous tissue in the interstitium was also seen. By the mycotoxin analysis of the Pedigree dry dog food, ochratoxin A (OTA) and citrinin were detected as much as the concentration of 372.8 ppb and 8.3 ppb, respectively. The final diagnosis of renal failure caused by OTA and citrinin toxicosis was made on the basis of history takings, clinical signs, clinicopathological and pathological findings, and analysis of mycotoxins.