• 유통과학연구
• /
• 제21권3호
• /
• pp.13-23
• /
• 2023

Purpose: Low-Cost Carrier airlines attempt to provide the best service for their customers. However, the pandemic has forced airline companies to keep developing new strategies. Moreover, in this digital era, airlines must intensely market their service through social media to reach as many customers as possible. This research aims to study the impact of advertisements on Instagram and the customer experience concerning customer loyalty and satisfaction in the aviation industry. Research design, data, and methodology: This study uses a quantitative explanatory with the combination of the positivism paradigm. The data collection technique is by distributing questionnaires to related airline Instagram followers. Meanwhile, the sample calculation uses using the Slovin formula in which 414 respondents are gained. The collected data is analyzed with Structural Equation Model and using Smart-PLS software. Results: The study results indicate that advertising on Instagram and customer experience significantly positively affect customer satisfaction and loyalty. In addition, the variable customer satisfaction has a significant positive on customer loyalty. Conclusions: The study results indicate that the ease of obtaining information via Instagram can affect satisfaction and will increase when customers have made a flight so that they will become loyal customers.

• Current Photovoltaic Research
• /
• 제6권1호
• /
• pp.21-26
• /
• 2018

Beside several advantages, the PV power generation as a clean energy source, is still below the supply level due to high power generation cost. Therefore, the interest in fabricating low-cost thin film solar cells is increasing continuously. $Cu_2O$, a low cost photovoltaic material, has a wide direct band gap of ~2.1 eV has along with the high theoretical energy conversion efficiency of about 20%. On the other hand, it has other benefits such as earth-abundance, low cost, non-toxic, high carrier mobility ($100cm^2/Vs$). In spite of these various advantages, the efficiency of $Cu_2O$ based solar cells is still significantly lower than the theoretical limit as reported in several literatures. One of the reasons behind the low efficiency of $Cu_2O$ solar cells can be the formation of CuO layer due to atmospheric surface oxidation of $Cu_2O$ absorber layer. In this work, atomic layer deposition method was used to remove the CuO layer that formed on $Cu_2O$ surface. First, $Cu_2O$ absorber layer was deposited by electrodeposition. On top of it buffer (ZnO) and TCO (AZO) layers were deposited by atomic layer deposition and rf-magnetron sputtering respectively. We fabricated the cells with a change in the deposition temperature of buffer layer ranging between $80^{\circ}C$ to $140^{\circ}C$. Finally, we compared the performance of fabricated solar cells, and studied the influence of buffer layer deposition temperature on $Cu_2O$ based solar cells by J-V and XPS measurements.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.289.1-289.1
• /
• 2016

Germanium (Ge) with higher carrier mobility and a lower crystallization temperature has been considered as the channel material of thin-film transistors for display applications. Various methods were studied for crystallizaion of poly-Ge from amorphous Ge at low temperature. Especially Metal induced crystalliazation (MIC) process was widely studied because low process cost. In this paper, we investigate copper diffusion process of different thick (70 nm, 350 nm) poly-Ge film obtained by MIC process at various temperatures (250, 300, and $350^{\circ}C$) through atomic force microscopy (AFM), Raman spectroscopy, and secondary ion mass spectroscopy (SIMS) measurement. Crystallization completeness and grain size was similar in all the conditions. Copper diffusion profile of 370 nm poly-Ge film show simirly results regardless of process temperature. However, copper diffusion profile of 70 nm poly-Ge film show different results by process temperature.

• Advances in nano research
• /
• 제2권1호
• /
• pp.23-56
• /
• 2014

The significant growth of the Si photovoltaic industry has been so far limited due to the high cost of the Si photovoltaic system. In this regard, the most expensive factors are the intrinsic cost of silicon material and the Si solar cell fabrication processes. Conventional Si solar cells have p-n junctions inside for an efficient extraction of light-generated charge carriers. However, the p-n junction is normally formed through very expensive processes requiring very high temperature (${\sim}1000^{\circ}C$). Therefore, several systems are currently under study to form heterojunctions at low temperatures. Among them, carbon nanotube (CNT)/Si hybrid solar cells are very promising, with power conversion efficiency up to 15%. In these cells, the p-type Si layer is replaced by a semitransparent CNT film deposited at room temperature on the n-doped Si wafer, thus giving rise to an overall reduction of the total Si thickness and to the fabrication of a device with cheaper methods at low temperatures. In particular, the CNT film coating the Si wafer acts as a conductive electrode for charge carrier collection and establishes a built-in voltage for separating photocarriers. Moreover, due to the CNT film optical semitransparency, most of the incoming light is absorbed in Si; thus the efficiency of the CNT/Si device is in principle comparable to that of a conventional Si one. In this paper an overview of several factors at the basis of this device operation and of the suggested improvements to its architecture is given. In addition, still open physical/technological issues are also addressed.

• 품질경영학회지
• /
• 제44권4호
• /
• pp.983-997
• /
• 2016

Purpose: The purpose of this paper is to examine the structural relationship among leader-member exchange(LMX), empowerment, job satisfaction, organizational commitment, and customer orientation in a low-cost carrier industry. Methods: The collected data through the survey were analyzed using structure equation model analysis The sample used for the empirical analysis is a total of 231 questionnaires. Results: The results of empirical analysis are summarized as follows. First, LMX in a low-cost airline has a significant effect on empowerment, job satisfaction, and customer orientation Second, empowerment has a significant impact on organizational commitment and job satisfaction. However, it is not significantly related to customer orientation. Third, Organization Commitment has significant effect on jon satisfaction. Finally, job satisfaction has a significant impact on customer orientation. Conclusion: This paper has a contribution in that it extends the range of the academic research concerning LMX. Also this paper provides implications on effective human resource management method suitable for a Jeju-Air.

• Journal of Korea Trade
• /
• 제25권8호
• /
• pp.57-74
• /
• 2021

Purpose - This study aims to analyze the characteristics of network construction by Norwegian Air and AirAsia X, which are recognized as leading airlines in the long-haul LCC market. Based on this analysis, this study intends to provide implications for networking strategies for Korean LCCs that seek to enter the long-haul market when the aviation market stabilizes again upon the end of the COVID-19 pandemic. Design/methodology - To conduct the network analysis on long-haul low-cost airlines, the Official Airline Guide (OAG) Schedule Analyzer was used to extract long-haul data of Norwegian Air and AirAsia X. To analyze the trend of the long-haul route network, we obtained the data from 3 separate years between 2011 and 2019. The network was analyzed using UCINET 6.0 in order to examine the network structure of long-haul low-cost airlines and the growth trend of each stage. Findings - Analyzing the network of long-haul routes by visualizing the network structure of low-cost carriers showed the following results. In its early years, Norwegian Air's long-haul route network, centering on regional airports in Spain and Sweden, connected European regions, the Middle East, and Africa. As time passed, however, the network expanded and became steadily strong as the airline connected airports in other European countries to North America and Asia. In addition, in 2011, AirAsia X showed links to parts of Europe, such as London and Paris, the Middle East and India, and Australia and Northeast Asia, centering on the Kuala Lumpur Airport. Although the routes in Europe were suspended, the network continued to expand while concentrating on routes of less than approximately 7,000 km. It was found that instead of giving up on ultra-long-haul routes such as Europe, the network was further expanded in Northeast Asia, such as the routes in Korea and Japan centering on China. Originality/value - Until the COVID-19 pandemic broke out, Norwegian Air actively expanded long-haul routes, resulting in the number of long-haul routes quintupling since 2011. The unfortunate circumstance, wherein the world aviation market was rendered stagnant due to the outbreak of COVID-19, hit Norwegian Air harder than any other low-cost carriers. However, in the case of AirAsia X, it was found that it did not suffer as much damage as Norwegian Air because it initially withdrew from unprofitable routes over 7,000 km and grew by gradually increasing profitable destinations over shorter distances. When the COVID-19 pandemic ends and the aviation market stabilizes, low-cost carriers around the world, including Korea, that enter the long-haul route market will need to employ strategies to analyze the marketability of potential routes and to launch the routes that yield the highest profits without being bound by distance. For stable growth, it is necessary to take a conservative stance; first, by reviewing the business feasibility of the operating a small number of highly profitable routes, and second, by gradually expanding these routes.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권4호
• /
• pp.149-157
• /
• 2017

In this study, a system that precisely determines the heave of ship hull was designed using time-differenced GNSS carrier phase measurement, and the performance was examined. First, a technique that calculates precise position relative to the original position based on TDCP measurement for point positioning using only one receiver was implemented. Second, to eliminate the long-cycle drift error occurring due to the measurement error that has not been completely removed by time-differencing, an easily implementable high-pass filter was designed, and the optimum coefficient was determined through an experiment. In a static experiment based on the precise heave measurement system implemented using low-cost commercial GNSS receiver and PC, the heave could be measured with a precision of 2 cm standard deviation. In addition, in a dynamic experiment where it moved up and down with an amplitude of 48 cm and a cycle of 20 seconds, precise heave without drift error could be determined. The system proposed in this study can be easily used for many applications, such as the altitude correction of fish detection radar.

• 한국항해항만학회지
• /
• 제33권2호
• /
• pp.99-104
• /
• 2009

The Kinematic GPS is well known to provide a quite good accuracy of positioning within an level. Although kinematic GPS assures high precision measurement on the basis of an appreciable distance between a reference station and an observational point, it has measurable distance restriction within 20 km from a reference station on land. Therefore, it is necessary to make out a simple and low-cost method to obtain accurate positioning information without distance restriction In this paper, the velocity integration method to get the precise velocity information of a ship is explained. The experimental results of Zig-zag maneuver and Williamson turn as the ship's maneuvering test, and other experimental results of ship's movement during leaving and entering the port with low speed were shown. From the experimental results, ship's course, speed and position are compared with those obtained by kinematic-GPS, velocity integration method and dead reckoning position using Gyro-compass and Doppler-log.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.241-244
• /
• 2012

Antimony doped tin oxide (ATO) thin films on glass substrate were prepared by the chemical solution deposition (CSD) method, using sol-gel solution synthesized by non-alkoxide precursors and the sol-gel route. The crystallinity and electrical properties of ATO thin films were investigated as a function of the annealing condition (both annealing environments and temperatures), and antimony (Sb) doping concentration. Electrical resistivity, carrier concentration, Hall mobility and optical transmittance of ATO thin films were improved by Sb doping up to 5~8 mol% and annealing in a low vacuum atmosphere, compared to the undoped tin oxide counterpart. 5 mol% Sb doped ATO film annealed at $550^{\circ}C$ in a low vacuum atmosphere showed the highest electrical properties, with electrical resistivity of about $8{\sim}10{\times}10^{-3}{\Omega}{\cdot}cm$, and optical transmittance of ~85% in the visible range. Our research demonstrates the feasibility of low-cost solution-processed transparent conductive oxide thin films, by controlling the appropriate doping concentration and annealing conditions.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.11.2-11.2
• /
• 2010

Photovoltaic devices are promising candidates as affordable and large-area renewable energy sources, which can replace the fossil-fuel-based resources. Especially, thin film solar cells have attracted increasing research attention, since they have a great advantage of low production cost. From the physical point of view, the photovoltaic devices can provide us interesting questions, how to enhance the light absorption and the carrier collection efficiency. A lot of approaches would be possible to address these issues. We have focused on two major topics relevant to photovoltaic device physics; (1) light management using surface plasmons and (2) junction characterizations aiming at proper interface engineering. Regarding the first topic, we have investigated the influences of Ag under-layer morphology on optical properties of ZnO thin films. The experimental results suggested that coupling between the surface plasmon polaritons at the ZnO/Ag interface and excitons in ZnO should play important roles in reflectivity of the ZnO/Ag thin films, which are widely used back reflector structures in thin film solar cells. For the second topic, we have carried out scanning probe microscopy studies of Schottky junctions consisting of photovoltaic materials. Such a research is very helpful to understand the correlation between the defects (e.g., grain boundaries) and local electrical properties. We will introduce some of the recent experimental results and discuss the physical significance.