• Journal of Ocean Engineering and Technology
• /
• v.9 no.1
• /
• pp.142-151
• /
• 1995

A simulation program concerned with multi-surface fatigue cracks which initiated at the semi-circular surface notches has been developed to predict their growth and coalescence behaviors at the elevated temperature. Three kinds of coalescence models such as SPC(surface point connection), ASME and BSI(British Standards Institution) conditions were applied, and the results of the simulation were compared with those of the experiment. This simulation is able to enhance the reliance and integrity of structures especially under the elevated temperature which have lots of difficulties in experiments and applications. This shows that the simulation result has utility for fatigue life prediction. Even though all the specimens were the same shape, the error rate was increased in accordance with the applied stress to the specimen. Among the material constants C and m in the narrow band, the results applied upper values of the band to the simulation has shown quite small error compared with the experiment results.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.179-182
• /
• 2000

Today, customer-requirements are getting various, so manufacturing companies face many problems to reflect them with its' new product development or product variety. As the product model managed by companies is more increasing, there might be much more selection conditions and many kinds of parts requited for it. With those reasons, it demands many different kinds of BOM information for new product development and product variety. Under the those manufacturing environment, we can realize that lots of current products have shared many design property and common parts with those of old version. This thesis present these new products for common characteries are classified design property and common parts with those of old version. with product family and it define with modelling language which is Generic BOM. The suggested prototype programmed with Power Builder 6.0 and Ms-SQL is to help companies manage common parts and develop new product effectively by classifying product family's basic characteries with basic and changable levels.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.873-877
• /
• 1997

This paper presents experimental results to know the charcteristics of machined surface due to cutter runout. Cutter runout is a common but undesirable phenomenon in multi-tooth machining such as end-milling process because it introduces variable chip loading to insert which results in a accelerated tool wear, amplification of force variation and hence enargement vibration amplitude. To develop in-proess cutter runout compensation system, set-up the micro-positoning mechanism which is based on piezoelectric translator embeded in the work holder to manipulate the depth of cut in real-time. And feasibility test of system was done under the various experimental cutting conditions. This results provide lots of information to build-up the precision machining technology.

• Journal of KSNVE
• /
• v.6 no.4
• /
• pp.481-491
• /
• 1996

In this paper, we formulated algorithm for free vibration analysis of cylindrical shells with stiffeners by applying the transfer influence coefficient method. This was developed as a vibration analysis method suitable for using personal computer(PC). The simple computational results form PC demonstrated the validity of the present algorithm, that is, the computational high accuracy and speed, and the flexibility of programming. We compared with results of the transfer matrix method and the reference. We also confirmed that the present algorithm could provide the solutions of high accuracy for system with a lots of intermediate rigid supports and stiffeners. And all boundary conditions and the intermediate stiff supports between shell and foundation could be treated only by adequately varying the values of the spring constants.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.468-472
• /
• 1992

In recent years, lots of researches on autonomous mobile robot have been accomplished. However they focused on environment recognition and its processing to make a decision on the motion, And cooperative multi-robot, which must be able to avoid crash and to make mutual communication, has not been studied much. This paper deals with cooperative motion of two robots, 'Meari 1" and "Meari 2 " made in our laboratory, based on communication between the two. Because there is an interference on communication occurring in cooperative motion of multi-robot, many restrictive conditions are required. Therefore, we have designed these robot system so that communication between them is available and mutual interference is precluded, and we used fuzzy interference to overcome unstability of sensor data.of sensor data.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2006.09a
• /
• pp.53-58
• /
• 2006

When the vibration troubles occur on the ship structure during the sea trial, the rectification work is very restricted because of in-situ limitation. Usually the finite element method is used to improve vibration characteristics of the structure, but it takes lots of time and effort in modeling the structure and adjusting the finite element model in order to consider appropriate boundary conditions of a complex ship structure. Therefore, experimental methods have been in general suggested to obtain proper countermeasures without time-consuming in modeling. In this paper, FRF(frequency response function) synthesis method is applied to estimate natural frequency of the modified ship structure, which is obtained from experimental and numerical methods.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.49-58
• /
• 2011

Fault Tree Analysis(FTA) builds fault trees to perform safety analysis of systems. However, building fault trees depends on domain knowledge and expertize on target systems and consumes lots of time and efforts. In this paper, we propose a technique that builds fault trees systematically based on state-transition models which are software design artifacts. For the end, this paper identifies conditions that should be satisfied to guarantee safety of state-transition models and develop templates for fault tree construction. This paper also describes the results of appling the proposed method to railway crossing control system.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.625-629
• /
• 2001

A cyber shopping mall is a place where consumers acquire product information, and make purchase decisions in the cyber space. Even though it offers many advantages over traditional malls, there are still several limitations to do shopping in an existing cyber mall. One of these limitations is the absence of an efficient shopping aid to compare multiple items from multiple malls. Existing search systems usually support a keyword search with limited conditions. Consumers spend lots of their time to compare multiple alternatives from search results. In this paper, we propose an intelligent product search system. There are two main features in our system. The first one is a full support of comparison shopping with multiple perspectives based on commercial search engines. The second one is an enhancement to the shopping aid based on a new concept of Shopping AssistanT. Our system is implemented in Visual Basic and PERL, and experimental results show a satisfactory performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.181-186
• /
• 2011

As the number of the apartments is increasing, many environmental problems are also occurred. There are lots of studies on that problems. Especially, a lot of studies about environmental noises are going along continuously. And they found out advanced results. In this study, we investigated the residents' subjective responses about environmental noises by survey, and verified the trend of the environmental noise conditions in apartment house. The results of this study will be useful to provide guideline to make policy of environmental noise and criteria.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.58-63
• /
• 1998

There are lots of factors that are related to the geometric characteristics of machined surface. Among them, the tool path and milling mode (up cut milling or down cut milling) are the easiest controllable machining conditions. Thus, the first objective of this research is to study the effects of them on the milled surface that is generated by an end milling tool. To get precision parts, not only the machining process but also the measurement of geometric tolerance is important. But, this measurement requires a lot of time, because the infinite surface points must be measured in the ideal case. So, the second objective is to propose a simple flatness measurement method that can be available instead of the 3-D geometric tolerance measurement method, using a scale factor and characterized points. Finally, it is also shown that the possibility of flatness improvement by shifting the consecutive fine cutting tool path as compared with the last rough cutting tool path.