• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.70-72
• /
• 2004

The paper proposes a new method to process transmission losses in power market operation using loss distribution factors and then compares the proposed method with the one using marginal loss factors. Effectiveness of the algorism is verified by a computer simulation.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권4호
• /
• pp.1-7
• /
• 2006

This paper reviews AC loss characteristics of high $T_c$ superconductors. The mechanisms of AC loss generation are explained briefly, and AC losses are classified by the magnetic field components which generate them. A couple of analytical formulae of AC losses, which are useful for simple and rough AC loss estimations, are presented. AC loss characteristics of single BSCCO multifilamentary conductors and single YBCO coated conductors are reviewed based on previous experimental and numerical studies. AC loss characteristics of those two types of practical high $T_c$ superconductors are compared with each other.

• Journal of Mechanical Science and Technology
• /
• 제16권8호
• /
• pp.1154-1164
• /
• 2002

Losses on the turbine consist of the mechanical loss, tip clearance loss, secondary flow loss and blade profile loss etc.,. More than 60 % of total losses on the turbine is generated by the two latter loss mechanisms. These losses are directly related with the reduction of turbine efficiency. In order to provide a new design methodology for reducing losses and increasing turbine efficiency, a two-dimensional axial-type turbine blade shape is modified by the optimization process with two-dimensional compressible flow analysis codes, which are validated by the experimental results on the VKI turbine blade. A turbine blade profile is selected at the mean radius of turbine rotor using on a heavy duty gas turbine, and optimized at the operating condition. Shape parameters, which are employed to change the blade shape, are applied as design variables in the optimization process. Aerodynamic, mechanical and geometric constraints are imposed to ensure that the optimized profile meets all engineering restrict conditions. The objective function is the pitchwise area averaged total pressure at the 30% axial chord downstream from the trailing edge. 13 design variables are chosen for blade shape modification. A 10.8 % reduction of total pressure loss on the turbine rotor is achieved by this process, which is same as a more than 1% total-to-total efficiency increase. The computed results are compared with those using 11 design variables, and show that optimized results depend heavily on the accuracy of blade design.

• 전자공학회논문지CI
• /
• 제42권2호
• /
• pp.1-10
• /
• 2005

인터넷을 위하여 현재 사용되는 TCP는 MANET(Mobile Ad Hoc Network)에서 사용될 때 효율성이 떨어진다. 그 이유는 무선네트워크에서 패킷 손실의 주된 원인이 통신 오류임에도 불구하고, TCP는 모든 패킷 손실을 통신혼잡에 기인한다고 가정하기 때문이다. 이러한 현상을 해소하고 성능을 제고하기 위하여, 본 논문은 전송지연시간과 전송지연시간들의 차이를 고려하여 패킷 손실의 원인을 규명하는 단-대-단 (end-to-end) 방법을 제안한다. 제안한 방법은 두 가지 특성을 지닌다. 첫째, 제안된 방법은 패킷 손실이 발생할 경우에만 작동하기 때문에 에너지 효율적이다. 둘째, 단 방향 통신에 소요된 시간을 사용함으로 왕복시간을 고려하는 기존의 방법보다 정확성이 더 높다. 제안된 방법의 페트리 넷 (Petri net) 모형을 구축하고, 시뮬레이션을 실행한 결과를 분석하여, 제안된 방법이 표준 TCP 보다 생산성(throughput)과 통신지연시간 면에서 월등히 우수함을 보인다.

• 디지털융복합연구
• /
• 제15권11호
• /
• pp.107-112
• /
• 2017

이 논문은 전통적인 기대효용이론의 한계를 극복하기 위해 대안으로 제시된 Tversky와 Kahneman의 전망이론이 타당한지에 대해 실험연구를 통하여 검증하였다. 연구방법은 대학생 115명에게 가상적인 2개의 대안 중에서 하나를 선택하도록 하는 게임을 제시하였는데, 하나는 위험이 없는 안전한 투자안이며 다른 하나는 위험이 있는 투자안이다. 위험한 대안은 발생확률이 낮은 경우, 중간인 경우, 그리고 높은 경우로 구분하였으며, 게임의 금액도 이득이 발생하는 경우와 손실이 발생하는 경우로 나누었으며, 금액이 큰 경우와 작은 경우로 구분하여 실험을 하였다. 참가자들로부터 받은 응답을 최우추정법으로 분석한 결과, 이득의 상황에서 위험대안의 발생 가능성이 큰 경우에는 위험회피적, 위험대안의 발생 확률이 작은 때에는 위험선호적, 위험대안의 발생가능성이 작은 경우에는 위험회피적인 것으로, 그리고 위험대안의 발생확률이 중간인 경우에는 손실의 경우에만 통계적 유의성이 있었으며, 이득의 경우에는 유의적이지 않은 것으로 나타났다. 게임의 금액의 크기는 이득의 상황이건 손실의 경우이건 영향을 미치지 않았다. 따라서 본 연구의 결과는 Laury & Holt (2008)의 연구보다 대체로 더 강하게 전망이론을 지지하는 것으로 해석된다.

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.55-55
• /
• 1977

This experimental work was conducted in order to find out the optimum time of harvest of Japonica-type(Akibare) and Indica-type(Tong-il) rice variety for three harvesting systems by investigating the harvestirg losses and milling quality. The study was also concerned atout the nature and amount of grain losses incurred during the each sequence of post-harvest technologies, and based on these results, a modification of existing systems giving a minimum grain loss was attempted. Binder, combine, and traditional harvesting systems were tested in this study and five grain moisture levels were disposed according to the decrease of grain moisture. The results are summarized as follows: 1. The total losses of Akibare variety were ranged from 1.1 to 1.5 per cent for the traditional harvesting system, 2.1 to 4.8 percent for the harvesting system by use of binder, and 2.8 to 4.3 percent for the harvesting system by use of combine as the grain moisture content was reduced from 24 to 15 per cent. Milling recovery of the harvesting system by use of binder, 74.8~ 75.7 percent, was a little higher as it was compared to that of traditional harvesting system, 74. 3~75. 0 percent, and that of the harvesting system by use of combine, 73.8~ 75.0 per cent. Head rice recovery of mechanically dried paddy samples was higher than that of sun-dried paddy samples. 2. The total losses of Tong-il variety were ranged from 3.8 to 5.0 per cent for the traditional harvesting system, 5.2 to 10.0 percent for the system by use of binder, and 3.0 to 5.0 perent for the system by use of combine as the grain moisture was reduced from 28 to 16 percent.

• Journal of Biosystems Engineering
• /
• 제2권1호
• /
• pp.56-80
• /
• 1977

This experimental work was conducted in order to find out the optimum time of harvest of Japonica-type (Akibare) and Indica-type(Tong-il) rice variety for three harvesting systems by investigating the harvesting losses and milling quality. The study was also concerned about the nature and amount of grain losses incurred during the each sequence of post-harvest technologies, and based on these result, a modification of existing systems giving a minimum grain loss was attempted. Binder, combine, and traditional systems were tested in this study and five grain moisture levels were disposed according to the decrease of grain moisture . The results are summarized as follows ; 1. The total losses of Akibare variety were ranged from 1.1 to 1.5 per cent for the traditional harvesting system , 2.1 to 4.8 per cent for the harvesting system by use of binder, and 2.8 to 4.3 per cent for the harvesting system by use of combine as the grain moisture content was reduced from 24 to 15 percent. Milling recovery of the harvesting system by use of binder, 74.8 ∼75.7 percent, was a little higher as it was compared to that of traditional harvesting system, 74.3 ∼75.0per cent, and that of the harvesting system by use of combine, 73.8 ∼75.0 per cent. Head rice recovery of mechanically dried paddy samples was higher than that of sun-dried paddy samples. 2. The total losses of Tong-il variety were ranged from 3.8 to 5.0 per cent for the traditional harvesting system, 5.2 to 10.0 percent for the system by use of binder, and 3.0 to 5.0 per cent for the system by use of combine as the grain moisture was reduced from 28 to 16 per cent. 3. Milling recovery of Tong-il variety harvested by the traditional harvesting system was 72.3 ∼73.6 percent and it was lower when compared to that of 72.3∼75.0 per cent harvested by binder, and 73.0∼74.6 percent harvested by combine. 4. Head rice recovery of Tong-il variety harvested by the traditional harvesting system (58.

• 한국전기전자재료학회논문지
• /
• 제22권7호
• /
• pp.606-611
• /
• 2009

AC loss is one of the important factors for commercialization of a high temperature superconducting (HTS) cable from an economic point of view. But AC loss characteristics of the HTS-cable are not elucidated completely because of its complex structure. As an earlier stage of analyzing the AC loss in the 22.9 kV/50 MVA, 100m HTS-cable system of Korea Electric Power Corporation (KEPCO) which is now in collaboration with us, a two-dimensional (2D) numerical model, which takes into account the nonlinear conductivity properties of a high temperature superconductor, has been developed. In order to examine our 2D model, we have prepared several single-layer cable samples whose AC losses are sufficiently reliable due to their simple structure. The AC losses of the samples were experimentally investigated and then compared with our 2D model. The results show that the numerically calculated AC losses are not in good agreement with the measured ones for the cylindrical cable and deca-cable samples with low critical current density. However, the numerically calculated and measured AC losses are relatively in good agreement for the deca-cable and hex-cable samples with high critical current density, although the difference between these two loss data in the deca-cable sample tends to increase in the low current region.

• Journal of Astronomy and Space Sciences
• /
• 제28권3호
• /
• pp.203-216
• /
• 2011

To prepare for a future Korean lunar orbiter mission, semi-optimal lunar capture orbits using finite thrust are designed and analyzed. Finite burn delta-V losses during lunar capture sequence are also analyzed by comparing those with values derived with impulsive thrusts in previous research. To design a hypothetical lunar capture sequence, two different intermediate capture orbits having orbital periods of about 12 hours and 3.5 hours are assumed, and final mission operation orbit around the Moon is assumed to be 100 km altitude with 90 degree of inclination. For the performance of the on-board thruster, three different performances (150 N with $I_{sp}$ of 200 seconds, 300 N with $I_{sp}$ of 250 seconds, 450 N with $I_{sp}$ of 300 seconds) are assumed, to provide a broad range of estimates of delta-V losses. As expected, it is found that the finite burn-arc sweeps almost symmetric orbital portions with respect to the perilune vector to minimize the delta-Vs required to achieve the final orbit. In addition, a difference of up to about 2% delta-V can occur during the lunar capture sequences with the use of assumed engine configurations, compared to scenarios with impulsive thrust. However, these delta-V losses will differ for every assumed lunar explorer's on-board thrust capability. Therefore, at the early stage of mission planning, careful consideration must be made while estimating mission budgets, particularly if the preliminary mission studies were assumed using impulsive thrust. The results provided in this paper are expected to lead to further progress in the design field of Korea's lunar orbiter mission, particularly the lunar capture sequences using finite thrust.

• 한국정보과학회논문지:정보통신
• /
• 제27권2호
• /
• pp.160-174
• /
• 2000

현재 가장 널리 쓰이는 수송계층 프로토콜인 TCP는 패킷 손실이 망의 혼잡 때문에 발생하는 기존의 망들에 적합하도록 되어 있다. TCP는 망의 패킷 에러율이 낮다는 가정 하에 종단간 신뢰성 있는 패킷 전송을 수행한다. 그러나 무선 링크가 있는 망에서는 높은 에러율과 핸드오프에 의한 패킷 손실이 발생하게 된다. TCP는 이런 경우에 발생되는 모든 패킷 유실에 대해서 혼잡 제어와 회피 알고리즘을 작동시키게 된다. 따라서 무선 링크에서의 높은 에러율에 의해 TCP의 불필요한 혼잡제어 알고리즘이 작동되고 망의 대역폭을 비효율적으로 사용하게 하여 무선 환경과 연결된 망에서의 종단간 성능을 저하시키게 된다. 이러한 무선 링크에서의 TCP 성능 향상을 위한 많은 방안들이 연구되고 있다. 본 논문에서는 무선 링크에서의 TCP 성능 향상을 위한 기존의 기법들을 비교 분석하고 각 방법의 성능을 평가하여 유무선 링크가 연결된 망에서 TCP의 성능 향상에 적합한 모델을 제시하고자 한다. 이는 기지국에서의 캐쉬 기법과 함께 TCP 종단간 SACK 옵션에 의한 수신자 정보를 사용하는 방법으로 시뮬레이션을 통하여 제시한 모델의 유효 처리율이 타 방식에 비해 향상되었고 무선 링크로의 중복된 재전송의 비율이 줄었음을 알 수 있었다.