• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.70-72
• /
• 2004

The paper proposes a new method to process transmission losses in power market operation using loss distribution factors and then compares the proposed method with the one using marginal loss factors. Effectiveness of the algorism is verified by a computer simulation.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.4
• /
• pp.1-7
• /
• 2006

This paper reviews AC loss characteristics of high $T_c$ superconductors. The mechanisms of AC loss generation are explained briefly, and AC losses are classified by the magnetic field components which generate them. A couple of analytical formulae of AC losses, which are useful for simple and rough AC loss estimations, are presented. AC loss characteristics of single BSCCO multifilamentary conductors and single YBCO coated conductors are reviewed based on previous experimental and numerical studies. AC loss characteristics of those two types of practical high $T_c$ superconductors are compared with each other.

• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1154-1164
• /
• 2002

Losses on the turbine consist of the mechanical loss, tip clearance loss, secondary flow loss and blade profile loss etc.,. More than 60 % of total losses on the turbine is generated by the two latter loss mechanisms. These losses are directly related with the reduction of turbine efficiency. In order to provide a new design methodology for reducing losses and increasing turbine efficiency, a two-dimensional axial-type turbine blade shape is modified by the optimization process with two-dimensional compressible flow analysis codes, which are validated by the experimental results on the VKI turbine blade. A turbine blade profile is selected at the mean radius of turbine rotor using on a heavy duty gas turbine, and optimized at the operating condition. Shape parameters, which are employed to change the blade shape, are applied as design variables in the optimization process. Aerodynamic, mechanical and geometric constraints are imposed to ensure that the optimized profile meets all engineering restrict conditions. The objective function is the pitchwise area averaged total pressure at the 30% axial chord downstream from the trailing edge. 13 design variables are chosen for blade shape modification. A 10.8 % reduction of total pressure loss on the turbine rotor is achieved by this process, which is same as a more than 1% total-to-total efficiency increase. The computed results are compared with those using 11 design variables, and show that optimized results depend heavily on the accuracy of blade design.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.2 s.302
• /
• pp.1-10
• /
• 2005

The current implementation of TCP for the Internet is not efficient when used for Mobile Ad hoc Networks (MANENTs). This is because TCP assumes that all packet losses are caused by congestion, whereas transmission errors are a main reason for packet losses in wireless networks. To remedy this situation and increase performance, we propose an end-to-end method of using propagation delays and the differences between propagation delays to distinguish the causes for packet losses. The proposed method has two characteristics: Firstly, it is energy-efficient because this solution is only initiated when a packet loss is detected. Secondly, our approach considers only the one way propagation delay and is more accurate in determining causes for packet losses than existing methods which consider round trip time. Petri net models of the proposed TCP and of the standard TCP have been built and simulations have been performed on them. Our simulation results show that the proposed approach increases throughput and reduces propagation delay compared with standard TCP.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.107-112
• /
• 2017

This paper performed an experimental study to test the validity of the prospect theory proposed by Tversky and Kahneman as an alternative to the expected utility theory. 115 college students attended the hypothetical games to choose one of two lotteries, one is safe option while the other one is risky. The risky options were set up to have low, medium or high probability of payoffs or losses. The amount of payoffs and losses of the lotteries was either large or small. Maximum likelihood estimation of the hypothetical games have shown that in case of high probability of positive payoffs the respondents were risk averse and when the probability of positive payoffs were small the respondents were risk loving. when the possibility of loss is high they were risk loving, while the probability is of loss is low the respondents were found to be risk averse. When the probability of risky options were medium the results were significant statistically in case of only losses. The amount of positive payoff or losses does not affect the results. Overall the results of this experiments support the prospect theory more than those of Laury & Holts (2008).

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.55-55
• /
• 1977

This experimental work was conducted in order to find out the optimum time of harvest of Japonica-type(Akibare) and Indica-type(Tong-il) rice variety for three harvesting systems by investigating the harvestirg losses and milling quality. The study was also concerned atout the nature and amount of grain losses incurred during the each sequence of post-harvest technologies, and based on these results, a modification of existing systems giving a minimum grain loss was attempted. Binder, combine, and traditional harvesting systems were tested in this study and five grain moisture levels were disposed according to the decrease of grain moisture. The results are summarized as follows: 1. The total losses of Akibare variety were ranged from 1.1 to 1.5 per cent for the traditional harvesting system, 2.1 to 4.8 percent for the harvesting system by use of binder, and 2.8 to 4.3 percent for the harvesting system by use of combine as the grain moisture content was reduced from 24 to 15 per cent. Milling recovery of the harvesting system by use of binder, 74.8~ 75.7 percent, was a little higher as it was compared to that of traditional harvesting system, 74. 3~75. 0 percent, and that of the harvesting system by use of combine, 73.8~ 75.0 per cent. Head rice recovery of mechanically dried paddy samples was higher than that of sun-dried paddy samples. 2. The total losses of Tong-il variety were ranged from 3.8 to 5.0 per cent for the traditional harvesting system, 5.2 to 10.0 percent for the system by use of binder, and 3.0 to 5.0 perent for the system by use of combine as the grain moisture was reduced from 28 to 16 percent.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.56-80
• /
• 1977

This experimental work was conducted in order to find out the optimum time of harvest of Japonica-type (Akibare) and Indica-type(Tong-il) rice variety for three harvesting systems by investigating the harvesting losses and milling quality. The study was also concerned about the nature and amount of grain losses incurred during the each sequence of post-harvest technologies, and based on these result, a modification of existing systems giving a minimum grain loss was attempted. Binder, combine, and traditional systems were tested in this study and five grain moisture levels were disposed according to the decrease of grain moisture . The results are summarized as follows ; 1. The total losses of Akibare variety were ranged from 1.1 to 1.5 per cent for the traditional harvesting system , 2.1 to 4.8 per cent for the harvesting system by use of binder, and 2.8 to 4.3 per cent for the harvesting system by use of combine as the grain moisture content was reduced from 24 to 15 percent. Milling recovery of the harvesting system by use of binder, 74.8 ∼75.7 percent, was a little higher as it was compared to that of traditional harvesting system, 74.3 ∼75.0per cent, and that of the harvesting system by use of combine, 73.8 ∼75.0 per cent. Head rice recovery of mechanically dried paddy samples was higher than that of sun-dried paddy samples. 2. The total losses of Tong-il variety were ranged from 3.8 to 5.0 per cent for the traditional harvesting system, 5.2 to 10.0 percent for the system by use of binder, and 3.0 to 5.0 per cent for the system by use of combine as the grain moisture was reduced from 28 to 16 per cent. 3. Milling recovery of Tong-il variety harvested by the traditional harvesting system was 72.3 ∼73.6 percent and it was lower when compared to that of 72.3∼75.0 per cent harvested by binder, and 73.0∼74.6 percent harvested by combine. 4. Head rice recovery of Tong-il variety harvested by the traditional harvesting system (58.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.7
• /
• pp.606-611
• /
• 2009

AC loss is one of the important factors for commercialization of a high temperature superconducting (HTS) cable from an economic point of view. But AC loss characteristics of the HTS-cable are not elucidated completely because of its complex structure. As an earlier stage of analyzing the AC loss in the 22.9 kV/50 MVA, 100m HTS-cable system of Korea Electric Power Corporation (KEPCO) which is now in collaboration with us, a two-dimensional (2D) numerical model, which takes into account the nonlinear conductivity properties of a high temperature superconductor, has been developed. In order to examine our 2D model, we have prepared several single-layer cable samples whose AC losses are sufficiently reliable due to their simple structure. The AC losses of the samples were experimentally investigated and then compared with our 2D model. The results show that the numerically calculated AC losses are not in good agreement with the measured ones for the cylindrical cable and deca-cable samples with low critical current density. However, the numerically calculated and measured AC losses are relatively in good agreement for the deca-cable and hex-cable samples with high critical current density, although the difference between these two loss data in the deca-cable sample tends to increase in the low current region.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.3
• /
• pp.203-216
• /
• 2011

To prepare for a future Korean lunar orbiter mission, semi-optimal lunar capture orbits using finite thrust are designed and analyzed. Finite burn delta-V losses during lunar capture sequence are also analyzed by comparing those with values derived with impulsive thrusts in previous research. To design a hypothetical lunar capture sequence, two different intermediate capture orbits having orbital periods of about 12 hours and 3.5 hours are assumed, and final mission operation orbit around the Moon is assumed to be 100 km altitude with 90 degree of inclination. For the performance of the on-board thruster, three different performances (150 N with $I_{sp}$ of 200 seconds, 300 N with $I_{sp}$ of 250 seconds, 450 N with $I_{sp}$ of 300 seconds) are assumed, to provide a broad range of estimates of delta-V losses. As expected, it is found that the finite burn-arc sweeps almost symmetric orbital portions with respect to the perilune vector to minimize the delta-Vs required to achieve the final orbit. In addition, a difference of up to about 2% delta-V can occur during the lunar capture sequences with the use of assumed engine configurations, compared to scenarios with impulsive thrust. However, these delta-V losses will differ for every assumed lunar explorer's on-board thrust capability. Therefore, at the early stage of mission planning, careful consideration must be made while estimating mission budgets, particularly if the preliminary mission studies were assumed using impulsive thrust. The results provided in this paper are expected to lead to further progress in the design field of Korea's lunar orbiter mission, particularly the lunar capture sequences using finite thrust.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.160-174
• /
• 2000

Nowadays, most widely used transport protocol, TCP is tuned to perform well in traditional networks where packet losses occur mostly because of congestion. TCP performs reliable end-to-end packet transmission under the assumption of low packet error rate. However, networks with wireless links suffer from significant losses due to high error rate and handoffs. TCP responds to all losses by invoking congestion control and avoidance algorithms, resulting in inefficient use of network bandwidth and degraded end-to-end performance in that system. To solve this problem, several methods have been proposed. In this paper, we analyse and compare these methods and propose appropriate model for improving TCP performance in the network with wireless links. This model uses TCP selective acknowledgement (SACK) option between TCP ends, and also uses caching method at the base station. Our simulation results show that using TCP SACK option with base station caching significantly reduces unnecessary duplicate retransmissions and recover packet losses effectively.