• 제목/요약/키워드: Loss-in-Weight Feeder

검색결과 6건 처리시간 0.024초

버터워스 필터를 이용한 감량식 정량연속공급장치 제어 시스템 (A Control System Using Butterworth Filter for Loss-in-Weight Feeders)

  • 강인재;문성민;권준호;홍대희
    • 한국정밀공학회지
    • /
    • 제31권10호
    • /
    • pp.905-911
    • /
    • 2014
  • A Loss-in-Weight (LIW) feeder, a type of automated measuring device, is a continuous feeder used in many mass production industries. Due to its versatility, there have been constant demands of LIW feeders in food production supply lines as well as chemical and pharmaceutical industries. In this paper, the process of designing a LIW feeder system with better performance will be examined and compared with commercial products. This system is characterized by low pass Butterworth filter and feed forward PI control. The filter is for noise disposal caused by dynamic condition of a LIW feeder. The feed forward PI control, based on linearity feature of feeders, is adequate for stable driving of the system. At the end, a possible evaluation method of LIW system will be proposed to verify the specific achievement of this paper.

공중 회전 방향탐지 반사판 안테나 급전기용 초광대역 LPDA 안테나 설계 (Design of an Ultra-Wideband LPDA Antenna for the Feeder of an Airborne Spinning Direction-Finding Reflector Antenna)

  • 박영주;박동철
    • 한국전자파학회논문지
    • /
    • 제27권7호
    • /
    • pp.653-659
    • /
    • 2016
  • 본 논문은 공중에서 회전하면서 광대역 신호를 방향 탐지하고 수신하는 반사판 안테나 급전기용 초광대역 LPDA(Log-Periodic Dipole Array) 안테나를 제안한다. S 대역부터 Ka 대역까지 20:1 이상의 초광대역 특성을 확보하기 위해 평면기판 위에 방사소자를 인쇄하였고, 기판 사이에 견고한 구조의 쐐기형 유전체 지지대를 삽입하였다. 또한, 무게를 줄이기 위해 지지대 중심 부분을 스티로폼 재질로 대체하였다. 설계된 LPDA 안테나의 5-dB 반사손실 대역폭은 시뮬레이션 37.57:1(1.09~40.95 GHz), 측정 33.85:1(1.31~44.35 GHz)로 초광대역 특성을 나타내었다. 동작 대역에서 평균 이득은 시뮬레이션, 측정 각각 5.79 dBi, 5.76 dBi로서 요구하는 이득을 확보하였다. 제안된 견고하고 가벼운 초광대역 LPDA 안테나는 항공용으로 적용될 수 있음을 확인하였다.

육성비육돈용 자동급이기 사료공급장치 개발에 관한 연구 (Development of the Automatic Feeder for Growing-finishing Pigs)

  • 유용희;송준익;최희철;김재환;박규현;강희설;장동일
    • 한국축산시설환경학회지
    • /
    • 제15권3호
    • /
    • pp.241-250
    • /
    • 2009
  • 본 연구는 사료 급여량 자동조절 및 사료의 허실을 최소화하며 구조가 간단한 육성비 육돈용 자동급이기 개발을 위해 수행하였다. 개발 시작형 자동급이기의 주요 구성은 사료저장조, 사료이송장치, 사료이송제어장치, 사료진타장치, 프로그램머블 IC, 개인용 컴퓨터로 구성되었다. 개발 시작형 자동급이기의 가루사료의 초당 평균 이송량은 $9.83{\pm}0.4\;g$, 이었다. 개발 시작형 자동급이기를 이용 체중 43 kg 내외 육성돈(렌드레이셔)을 공시 6주 동안 콘크리트 돈방에서 사양 시험을 실시하였다. 개발 시작형 자동급이기는 사료공급 시간을 2초, 3, 4, 5, 6초로 설정, 검증시험을 수행 하였다. 개발 시작형 자동급이기 일일 급이기 방문 빈도는 사료이송 구동시간에 관계없이 05~11시와 11시부터 17시 사이에 집중적 이었다. 사료허실을 줄이기 위하여 개발 시작형 자동급이기 사료이송 시간은 2~4초 이내가 적절한 것으로 나타났다. 개발 시작형 자동급이기의 사료이송 기준 6초를 제외하고, 개발 시작형 자동급이기가 관행 급이기보다 시험 전기간 평균 일당 종체량(0.8~0.9 kg)은 같거나 높고, 일일 사료섭취량과 (2.76~2.93 kg), 사료요구율 (3,10~3.66)은 같거나 낮은 것으로 나타났다. 이상 결과를 일당증체, 사료섭취량, 사료요구율, 사료 허실량 등을 종합 해보면 육성비육돈용으로 개발 시작형 자동급이기 이용이 가능할 것으로 사료된다.

  • PDF

배전계통의 역률보상 콘덴서의 최적 위치 및 용량 산정 (The Optimal Condenser Position & Capacity for Power Factor Compensation in Distribution System)

  • 장정태;전영수
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제48권10호
    • /
    • pp.1190-1197
    • /
    • 1999
  • The management of power factor(PF) in the distribution line is treated according to the measurement a month about the feeder unit at the substation. In Korea, we have not researched into power factor in distribution system due to it's less weight. The reactive power in advanced countries is controlled automatically by the compensative condenser switch on/off under the monitoring. This paper first presents the optimal condenser position and proper capacity by lagrangue factor ${\lambda}_{Q}$ which is the line loss index about reactive power unit. Therefore, the largest ${\lambda}_{Q}$ node is the condenser injection point and we find out the best condenser capacity when the line loss is saturated by the moderation of condenser volume. By this method, we suggest 0.6% uprising PF by injection of 15 kVA condenser. Additionally, PF is analysed into 5 areas; large city, middle city, small city, farm village, fishing village by the use of Power Platform which is classified the same concept of the low load management in KEPCO. Two feeders of each area are selected by the worst results of PF in specified areas.

  • PDF