• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.638-642
• /
• 2003

This paper presents a parameter design of an Electrorheological(ER) panel for noise reduction using Taguchi method. Taguchi method is a robust design method that determines control parameters in the presence of noise effect. Host structure thickness, spacer thickness, base oil viscosity and the weight ratio of ER particles are chosen for the control factors. A test setup in an SAE J1400 facility is used to analyze the sound transmission loss. The sensitivity of each factor with signal-to-noise(S/N) ratio and analysis of variance are investigated. The analysis results show that the weight ratio of ER particle and base oil viscosity of the ER fluid mostly affects the noise reduction in the presence of electric field. Based on the Taguchi method, an optimal configuration was designed and comparison is made with experimental result fer the verification.

• 제어로봇시스템학회논문지
• /
• 제12권6호
• /
• pp.530-538
• /
• 2006

DSP chip parameters of a digital hearing aid (HA) should be optimally selected or fitted for hearing impaired persons. The more precise parameter fitting guarantees the better compensation of the hearing loss (HL). Digital HAs adopt DSP chips for more precise fitting of various HL threshold curve patterns. A specific DSP chip such as Gennum GB3211 was designed and manufactured in order to match up to about 4.7 billion different possible HL cases with combination of 7 limited parameters. This paper deals with a digital HA fitting program which is developed for optimal fitting of GB3211 DSP chip parameters. The fitting program has completed features from audiogram input to DSP chip interface. The compensation effects of the microphone and the receiver are also included. The paper shows some application examples.

• Journal of Advanced Research in Ocean Engineering
• /
• 제1권1호
• /
• pp.44-54
• /
• 2015

Breakwaters are the coastal structures constructed either perpendicular (shore connected) or parallel (detached) to the coast. The main function of breakwater is to create a tranquil medium on its leeside by reflecting the waves and also dissipating the wave energy arriving from seaside, resulting in ease of manoeuvrability to boats or ships to their berthing places. Different types of breakwaters are being used at present, such as rubble mound breakwater, vertical wall type breakwater and composite breakwater. The objective of this paper is to investigate reflection coefficients (Kr) and dissipation (loss) coefficients (Kl) for physical models of Quarter circle caisson breakwater of three different radii of 0.550 m, 0.575 m and 0.600 m with S/D ratio of 2.5 (S=spacing between perforations, D=diameter of perforations). The models were tested in the monochromatic wave flume of the department, for different incident wave heights (Hi), Wave periods (T) and water depths (d). It was observed that reflection coefficient increased with increase in the wave steepness (Hi/gT2) and decreased with increase in depth parameter (d/gT2) and hs/d (Height of structure including rubble base/depth of water). The loss coefficient decreased with increase in the wave steepness and increased with increase in depth parameter and hs/d.

• 한국지반환경공학회 논문집
• /
• 제16권11호
• /
• pp.29-37
• /
• 2015

최근 급격한 도시화로 인한 신도시, 택지개발지구 등의 증가로 기존 구조물 하부를 통과하는 비개착 강관압입공법의 적용이 증가하는 추세이다. 비개착공법은 시공 중 기존구조물의 정상적인 운영 안정성이 확보되어야 하므로 강관압입에 의한 지표침하의 정밀한 예측이 필수적으로 필요한 공법이다. 강관압입 시 침하를 발생시키는 원인은 강관 선단과 강관과의 직경차에 의한 공극, 원활한 강관압입을 위한 과굴착, 강관과 지반과의 마찰에 의한 공극 발생 등이 있으며, 이는 Shield TBM 시공 시 발생하는 침하 원인과 유사하다. 본 연구에서는 Shield TBM의 침하 예측방법인 Gap Parameter Method와 Volume Loss Method를 이용하여 강관압입 시 침하를 예측하였으며, 현장시험을 통하여 예측방법에 대한 비교 분석을 수행하였다. 그 결과 Volume Loss 예측방법이 현장시험과 가장 유사한 결과로 나타났으나, 추후 예측방법의 Factor 결정 및 비개착공법 전체 침하예측을 위한 적용성 등 추가적인 연구가 필요할 것으로 판단된다.

• 한국전자파학회논문지
• /
• 제25권3호
• /
• pp.319-332
• /
• 2014

삽입 손실은 EMI 필터의 노이즈 제거 성능을 나타내는 주된 지표로 쓰인다. 본 논문에서는 기존의 방법보다 좀 더 정확하고 편하게 삽입 손실을 측정할 수 있는 방법에 대하여 연구하였다. 이와 관련하여 EMI 필터의 비이상적인 특성들을 모두 고려하기 위해 4포트 S-파라메터 측정을 통한 임의의 전원/부하 임피던스에 대한 차동 모드와 공통 모드의 삽입 손실을 구하는 방법에 대하여 제시하였다. 이를 활용하여 EMI 필터가 사용될 회로의 전원/부하 임피던스를 알고 있을 때, 시스템에 적용된 EMI 필터의 차동 모드 삽입 손실과 공통 모드 삽입 손실를 구할 수 있다. 또한, 이를 바탕으로 적절한 소자 값을 선택하기 위해 혼합 모드 변환, 체인 혼합 모드 변환 그리고 4포트 모델링을 통하여 임의의 소자 값에 따른 전체 시스템의 삽입 손실을 예측하는 방법에 대하여 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.349-354
• /
• 2007

This paper considers acoustic analysis of silencer within a Dry vacuum pump. Main object is noise reduction of Dry Vacuum Pump using the silencer. First, we measured SPL and Intensity for noise source identification and then, designed for the silencer corresponding with noise character. 4-pole parameter are used for predicting transmission loss which is one of characteristics of silencer when we designed for silencer. Calculated Transmission Loss to change main effective factor and selected to optimal value using Design of Experiment. Finally, noise reduction is estimated to compare existing silencer with optimal silencer.

• 한국항공운항학회지
• /
• 제26권2호
• /
• pp.83-90
• /
• 2018

This paper describes a case study on the design factor analysis of vertical wind tunnel for skydiver's training or experiencing of paradropping exercise in the air. The case study of vertical wind tunnel design is to provide the knowledges on effects of parameter's variation when it is applied to overall or partial duct of tunnel circuit. The analysis of design parameters based on pressure loss are produced one by one through the tunnel components from the flight chamber because the wind tunnel must satisfy the requirement of flight chamber such as flow speed, quality and quantity. Results shows the various effects of parameter variation with pressure loss in the wind tunnel circuit. Pressure loss should be based on the determination of fan and power system which can be selected from market or new design.

• 경영과학
• /
• 제12권1호
• /
• pp.111-124
• /
• 1995

With the increasing interest of reducing process variation, statistical process control has served the pivotal tool in most industrial quality programs. In this study, system analyses have been performed associated with a cost incorporated version of a process control, a quadratic loss-based X over bar control chart model. Specifically, two issues, the capital/research investments for improvement of a system and the precision of a parameter estimation, have been addressed and discussed. Through the analysis of experimental results, we show that process variability is seen to be one of the most important sources of loss and quality improvement efforts should be directed to reduce this variability. We further derive the results that, even if the optimal designs may be sensitive, the model appears to be robust with regard to misspecification of parameters. The approach and discussion taken in this study provide a meaningful guide for proper process control. We conclude this study with providing general comments.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.124-128
• /
• 2001

We apply for the first time a low cost and loss wafer level packaging technology for RF-MEMS device. The proposed structure was simulated by finite element method (FEM) tool (HFSS of Ansoft). S-parameter measured of the package shows the return loss (S11) of 20dB and the insertion loss (S21) of 0.05dB.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.332-342
• /
• 2018

This paper proposes a parameter design method for multi-element resonant converters (MERCs) with a unique resonant zero point (RZP). This method is mainly composed of four steps. These steps include program filtration, loss comparison, 3D figure fine-tuning and priority compromise. It features easy implementation, effectiveness and universal applicability for almost all of the existing RZP-MERCs. Meanwhile, other design methods are always exclusive for a specific topology. In addition, a novel dual-CTL converter is also proposed here. It belongs to the RZP-MERC family and is designed in detail to explain the process of parameter selection. The performance of the proposed method is verified experimentally on a 500W prototype. The obtained results indicate that with the selected parameters, an extensive dc voltage gain is obtained. It also possesses over-current protection and minimal switching loss. The designed converter achieves high efficiencies among wide load ranges, and the peak efficiency reaches 96.9%.