• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1828-1829
• /
• 2006

In this paper, we propose sliding mode congestion controller for differentiated-services network. Two important issue in differentiated-services architecture are bandwidth guarantee and fair sharing of unsubscribed bandwidth among TCP flows with and without bandwidth reservation. We use tight upper and lower bounds for various settings of differentiated-services parameters using the loss-bounded model. The Sliding mode congestion controller scheme is designed using nonlinear control theory based on a nonlinear model of the network that is generated using fluid flow consideration. The methodology used is general and independent of technology, as for example TCP/IP or ATM. The sliding mode congestion controller methodology has been applied to an TCP network. We use NS-2 simulation to demonstrate that the proposed control methodology achieves the desired behavior of the network, and possesses important attributes. as e.g, stable and robust behavior, high utilization with bounded delay and loss, together with good steady-state and transient behavior.

• Journal of Communications and Networks
• /
• 제7권4호
• /
• pp.408-416
• /
• 2005

Quality of service (QoS) provision is an important and indispensable function for multi-service wireless networks. In this paper, we present a new scheduling/admission control frame­work, including an efficient rate-guaranteed opportunistic scheduling (ROS) scheme and a coordinated admission control (ROS­CAC) policy to support statistic QoS guarantee in multi-service wireless networks. Based on our proposed mathematical model, we derive the probability distribution function (PDF) of queue length under ROS and deduce the packet loss rate (PLR) for individual flows. The new admission control policy makes admission decision for a new incoming flow to ensure that the PLR requirements of all flows (including the new flow) are satisfied. The numerical results based on ns-2 simulations demonstrate the effectiveness of the new joint packet scheduling/admission control framework.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.214-230
• /
• 2014

This paper presents a high performance sensor less control four motorized wheels for electric vehicle. Firstly, we applied a sensor less master-slave DTC based control to both the two in wheel motors by using sliding mode observer for its quick response and its high reliability in electric vehicle application. Secondly, to overcome the possible loss of adherence of one of the four wheels which is likely to destabilize the vehicle a solution is proposed in this paper. Thirdly, a Fuzzy logic anti-skid control structure well adapted to the non-linear system is used to overcome the main problem of power train system in the wheel road adhesion characteristic. Various Simulation results have been include in this paper to show that the proposed control strategy can prevent vehicle sliding and show good vehicle stability on a curved path.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.25-33
• /
• 2015

This paper presents the d-q axis equivalent circuit model of an interior permanent magnet (IPM) which includes the iron loss resistance. The model is implemented to be able to run in real-time on the FPGA-based HIL simulator. Power electronic devices are removed from the motor control unit (MCU) and a separated controller is interfaced with the real-time simulated motor drive through a set of proper inputs and outputs. The inputs signals of the HIL simulation are the gate driver signals generated from the controller, and the outputs are the winding currents and resolver signals. This paper especially presents iron loss prediction which is introduced by means of comparing the torque calculated from d-q axis currents and the desired torque; and minimizing the torque difference. This prediction method has stable prediction algorithm to reduce torque difference at specific speed and load. Simulation results demonstrate the feasibility and effectiveness of the proposed methods.

• 한국항해항만학회지
• /
• 제45권5호
• /
• pp.231-237
• /
• 2021

Enhancing the performance of maritime wireless communication has been highlighted by the issue of cell planning in the sea area because of lack of an appropriate Propagation Loss Model (PLM). To resolve the cell planning issue in vast sea areas, it was essential to develop the (PLM) matching the intended sea area. However, there were considerable gaps between the prediction of legacy PLMs and field measurement in propagation loss and there was a need to develop the adjusted PLM (A-PLM). Therefore, cell planning was performed on this adjusted model, including modification of the base station's location, altitude, and antenna azimuth to meet the quality objectives. Furthermore, in order to verify the availability of the cell planning, Communication Service Quality Monitoring System (CS-QMS) was developed in the LTE-Maritime project to collect LTE signal quality information from the onboard equipment at regular intervals and to ensure that the service quality was high enough to satisfy the goals in each designated grid. As a result of verification, the success rate of RSRP was 95.7% for the intensive management zone (IMZ) and 96.4% for the interested zone (IZ), respectively.

• 한국항행학회논문지
• /
• 제13권4호
• /
• pp.523-531
• /
• 2009

본 논문에서는 패킷 손실 채널로의 전송을 위한 비디오 부호기의 소스/채널 부호화율 통합 제어 방식을 제안한다. 비디오 전송 시스템의 지연 제약에 따른 소스 부호화율 상한을 구하고, 부호화되거나 스킵된 화면에 대한 소스 왜곡과 패킷 손실에 의한 채널 왜곡을 기반으로 일정 부호화 구간에 대한 평균 왜곡을 정의한다. 주어진 채널률과 패킷 손실률에 대해 비디오 부호화 계수와 FEC 블록 크기를 제어계수로 하는 평균 왜곡 최소화 문제를 정의하고, 실시간 해결 알고리즘을 제안한다. 모의실험에서 제안방식은 40% 이하의 패킷 손실률과 30 프레임 이상의 인트라 매크로블럭 갱신률에서 TMN8에 비해 PSNR과 주관적 화질에서 우수한 성능을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.82.2-82
• /
• 2001

In this paper, when we design and implement an internet-based teleoperation control, some important points that should be considered (e.g., transmission characteristics, time delay prediction and transmission protocol are inspected and simulated. First, we will investigate data transmission characteristics at the Internet, and build a model for the transmission delay and packet loss through the characteristics of that effect. And then, we inspect how to predict transmission delay, and examine transmission protocols which are proper for the control-oriented Internet protocol. Finally, we apply it to a force-reflective teleoperation control system that consists of a six d.o.f haptic interface and a five d.o.f manipulator via the Internet.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1006-1017
• /
• 2015

This paper presents a finite control set model predictive control (FCS-MPC) strategy for the AC/DC matrix converter used in grid-connected battery energy storage system (BESS). First, to control the grid current properly, the DC current is also included in the cost function because of input and output direct coupling. The DC current reference is generated based on the dynamic relationship of the two currents, so the grid current gains improved transient state performance. Furthermore, the steady state error is reduced by adding a closed-loop. Second, a Luenberger observer is adopted to detect the AC input voltage instead of sensors, so the cost is reduced and the reliability can be enhanced. Third, a switching state pre-selection method that only needs to evaluate half of the active switching states is presented, with the advantages of shorter calculation time, no high dv/dt at the DC terminal, and less switching loss. The robustness under grid voltage distortion and parameter sensibility are discussed as well. Simulation and experimental results confirm the good performance of the proposed scheme for battery charging and discharging control.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1901-1910
• /
• 2023

The safety-class (1E) digital control system (DCS) of nuclear power plant characterized structural multiple redundancies, therefore, it is important to quantitatively evaluate the reliability of DCS in different degree of backup loss. In this paper, a reliability evaluation model based on T-S fuzzy fault tree (FT) is proposed for 1E DCS of nuclear power plant, in which the connection relationship between components is described by T-S fuzzy gates. Specifically, an output rejection control system is chosen as an example, based on the T-S fuzzy FT model, the key indicators such as probabilistic importance are calculated, and for a further discussion, the T-S fuzzy FT model is transformed into Bayesian Network(BN) equivalently, and the fault diagnosis based on probabilistic analysis is accomplished. Combined with the analysis of actual objects, the effectiveness of proposed method is proved.

• 동의신경정신과학회지
• /
• 제17권2호
• /
• pp.1-13
• /
• 2006

Objective : This study examined whether Yangsung program (oriental psychological weight regulation model based on Confucian ideas) is effective on weight loss, self esteem, three factor on eating questionnaires(restraint eating, disinhibition and hunger), distortion of body-image and biochemistry of blood. Method : 23 women were assigned randomly into 2 groups; experimental group(n=10) and control group(n=13). Experimental group had 7 personal sessions consisting of personal Yangsung therapy, meditation, general diet and exercise education. Control group had personal sessions with general diet and exercise education once a week for 6 weeks. All subjects were weighed and evaluated with Rosenberg self esteem scale, distortion of body-image, biochemistry of blood and three factor eating questionnaires at the beginning and end of the program. Result : There is significant difference between two groups in changes of self esteem, disinhibition and hunger(p<0.05). There is no significant difference in weight reduction and BMI between two groups. Conclusion : This study showed a new possibility of unique psychological program for obesity characterized by its philosophical context.